SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Lunga Chung]

For now the best miner by far, expired shares substantially lower

Mining with 6x RX580 @ 5,8Khs super stable for 24h

[1714008409]

1714008409

[1714008409]

1714008409

[Archangel9999]

Do you have any plans to add -fastjobswitch for pools with set difficulty ? They are 2% of expired shares when using the miner at the moment ?

Thanks

[erkange]

Speed is good.  Although power consumption can be reduced to 100-105w from wall per GPU.

Thank you. I haven`t really tweak my voltage yet, will do that next.

what are your settings (intensity, clock speeds)?

cclock = 1260, mclock = 2000, intensity = 59, Double thread = true

how do you set cclock and mclock?
With Afterburner or in settings?

[JuanHungLo]

2020 on vega 56, nice jobson.

What intensity?

[alczaty]

8600 h/s with 9cards.
1020 rx 580 saphire 8gb
880 rx 570 msi armor 4gb.
good job !

[Ale-x1]

Nice DevFee. Nice miner!
Got 990 H/s per RX470/4Gb
Thanks!

[WhyMe]

Any plan to have full command line parameters and not a config file ?

[alczaty]

Nice DevFee. Nice miner!
Got 990 H/s per RX470/4Gb
Thanks!

what are your settings for this card ?

[DStefanov]

Hi,
I have 6xRX480 cards and I mining into https://supportxmr.com/. Can someone give the settings of config.txt file.
Thanks.

[pel0v89]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

[RaidoP2]

Anyone else using this miner with R9 380 or R9 380X?

What kind of hashrate are you getting and which intensities are you using?

I haven't gotten much more than 550h/s from these cards with SRB.

[Ale-x1]

Nice DevFee. Nice miner!
Got 990 H/s per RX470/4Gb
Thanks!

what are your settings for this card ?

It's ASUS RX470 4Gb with Elpida memory
core 1266
mem 1994

double threads = true
intensity = 56

[RaidoP2]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

I have seen these errors when intensity was too high. Which cards are you using and which intensity?

[inv1s1bl3]

Okay, there's one thing I cannot understand and that is how to setup the .bat file I copied the following thing to the config.txt file:

Code:

{
"cryptonight_type" : NORMAL
"intensity" : 0,
"double_threads" : TRUE,
"target_temperature" : 45,
"pool_use_tls" : FALSE,
"pool" : "etn-eu1.nanopool.org:13333",
"wallet" : "xxx",
"password" : "x",
"location" : "EUROPE",
"log_file" : "IF YOU WANT TO LOG MINER OUTPUT PUT A FILENAME HERE"
}

I did not make any changes in the .bat file, because I wasn't too sure if I should be doing it. When I start the bat file, it loads something and afterwards I receive an error in the config.txt file (ParseError). Can anyone explain what do I exactly need to do to fix this issue?

EDIT: adding what's in the .bat file:

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off

cls
SETLOCAL EnableExtensions
set EXE=SRBMiner-CN.exe

:START
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING
%EXE% -c config.txt
TIMEOUT /T 15 /NOBREAK
goto START
:RUNNING
echo "%EXE% is already running"
pause

[Ale-x1]

Okay, there's one thing I cannot understand and that is how to setup the .bat file I copied the following thing to the config.txt file:

Code:

{
"cryptonight_type" : NORMAL
"intensity" : 0,
"double_threads" : TRUE,
"target_temperature" : 45,
"pool_use_tls" : FALSE,
"pool" : "etn-eu1.nanopool.org:13333",
"wallet" : "xxx",
"password" : "x",
"location" : "EUROPE",
"log_file" : "IF YOU WANT TO LOG MINER OUTPUT PUT A FILENAME HERE"
}

I did not make any changes in the .bat file, because I wasn't too sure if I should be doing it. When I start the bat file, it loads something and afterwards I receive an error in the config.txt file (ParseError). Can anyone explain what do I exactly need to do to fix this issue?

Just add comma

,

after "cryptonight_type" : NORMAL

[doktor83]

Okay, there's one thing I cannot understand and that is how to setup the .bat file I copied the following thing to the config.txt file:

Code:

{
"cryptonight_type" : NORMAL
"intensity" : 0,
"double_threads" : TRUE,
"target_temperature" : 45,
"pool_use_tls" : FALSE,
"pool" : "etn-eu1.nanopool.org:13333",
"wallet" : "xxx",
"password" : "x",
"location" : "EUROPE",
"log_file" : "IF YOU WANT TO LOG MINER OUTPUT PUT A FILENAME HERE"
}

I did not make any changes in the .bat file, because I wasn't too sure if I should be doing it. When I start the bat file, it loads something and afterwards I receive an error in the config.txt file (ParseError). Can anyone explain what do I exactly need to do to fix this issue?

Just add comma

,

after "cryptonight_type" : NORMAL

and quotes too, like "normal"

[pel0v89]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

I have seen these errors when intensity was too high. Which cards are you using and which intensity?

intensity is 0 and the cards are sapphire rx 580 nitro+ 4gb .... so should i set it to like 40 or so ?

[inv1s1bl3]

Just add comma

,

after "cryptonight_type" : NORMAL

and quotes too, like "normal"

Still receiving the same error  

[zile74]

GOOD JOB !!!  

win10, lates driver win10-64bit-radeon-software-adrenalin-edition-18.3.4-march23

4 x vega64
8gb mem

gpu 1502/mV1000
mem 1095/mV950


got ~ 2040mhes/s

[RaidoP2]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

I have seen these errors when intensity was too high. Which cards are you using and which intensity?

intensity is 0 and the cards are sapphire rx 580 nitro+ 4gb .... so should i set it to like 40 or so ?

That's strange, which pool are you using? Maybe it could be a connection problem, probably the developer knows best.