SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

Doctor, did you fix issue with launching Pitcairn card alone when it 3rd GPU?

V1.3.2
- Hopefully fixed bug when in 'gpu_conf' you want to set only one GPU

[1713481406]

1713481406

[1713481406]

1713481406

[1713481406]

1713481406

[alan07]

Tell me how in the batch file to customize for each card its intensity?

[doktor83]

Tell me how in the batch file to customize for each card its intensity?

all info you need is in the first post

[fanisk21]

Hi guys, one question, i have 6 rx580 8g doing 1050hs in CN Heavy . It's stable, without memory erros and etc. But when dev fee starts hashrate drops to 800/900+ and stays instable and after some 1 hour+ all cards stays at 1050 again. Wich could be the problem? Or is that a normal?

Thanks

Edit:

I'm using { "id" : x, "intensity" : 58, "worksize" : 16, "threads" : 2}, for all.

It's happening now:

https://i.imgur.com/P9GRh2r.png

[doktor83]

Hi guys, one question, i have 6 rx580 8g doing 1050hs in CN Heavy . It's stable, without memory erros and etc. But when dev fee starts hashrate drops to 800/900+ and stays instable and after some 1 hour+ all cards stays at 1050 again. Wich could be the problem? Or is that a normal?

Thanks

Edit:

I'm using { "id" : x, "intensity" : 58, "worksize" : 16, "threads" : 2}, for all.

It's happening now:

its normal, and its not because of devfee. heavy algo fluctuates a few hundred mhs.

[fanisk21]

Hi guys, one question, i have 6 rx580 8g doing 1050hs in CN Heavy . It's stable, without memory erros and etc. But when dev fee starts hashrate drops to 800/900+ and stays instable and after some 1 hour+ all cards stays at 1050 again. Wich could be the problem? Or is that a normal?

Thanks

Edit:

I'm using { "id" : x, "intensity" : 58, "worksize" : 16, "threads" : 2}, for all.

It's happening now:

https://i.imgur.com/P9GRh2r.png

its normal, and its not because of devfee. heavy algo fluctuates a few hundred mhs.

Ok , thanks Gj btw

[gazu]

do you get this with kernel 3? you have 512mb 6950?

I use kernel 3 and my card is 2024 mb

[dohfish]

V1.4.4
- Fixed (hopefully) situation when miner hashed in 'empty' for a long time
- Added mining session average speed display
- Removed greedybastard switch

ah, im tired. Please all of you having the 'devfee stuck' or 'miner not doing anything' problem, download this version and test.
It should be ok now.

Also removed the greedy switch. This is just taking too much of my free time, and i think the devfee % is not something terrible.

I hope everything will be stable now and i can get myself on the overclocking stuff and the API finally. 

1.4.4 still crashes instantly when pressing "h" to see hashrate on all of my 15 rigs.

Miner is still rather unstable with restarts every 15-20 minutes.

probably crash because you overclock to much, try to decrease a bit gpu clock

The machines are stable on all other different software out there - And it has been stable for months.

--adldisable seems to have done the trick for now, going to test it a bit more.

can you tell on which cards do you have to use the --adldisable ?

I am only using MSI RX570 Armor 4GBs - All on 18.1 driver, not tested with newer ones as I have simply not had the time to tinker with it, it is working in general though.

With --adldisable it is stable, at least for the last 13 hours it has been stable on the two rigs  that im testing it on now, tweaked intensity and are getting slight faster speeds than GGS now aswell, overall seems quite okay.

[doktor83]

V1.4.4
- Fixed (hopefully) situation when miner hashed in 'empty' for a long time
- Added mining session average speed display
- Removed greedybastard switch

ah, im tired. Please all of you having the 'devfee stuck' or 'miner not doing anything' problem, download this version and test.
It should be ok now.

Also removed the greedy switch. This is just taking too much of my free time, and i think the devfee % is not something terrible.

I hope everything will be stable now and i can get myself on the overclocking stuff and the API finally. 

1.4.4 still crashes instantly when pressing "h" to see hashrate on all of my 15 rigs.

Miner is still rather unstable with restarts every 15-20 minutes.

probably crash because you overclock to much, try to decrease a bit gpu clock

The machines are stable on all other different software out there - And it has been stable for months.

--adldisable seems to have done the trick for now, going to test it a bit more.

can you tell on which cards do you have to use the --adldisable ?

I am only using MSI RX570 Armor 4GBs - All on 18.1 driver, not tested with newer ones as I have simply not had the time to tinker with it, it is working in general though.

With --adldisable it is stable, at least for the last 13 hours it has been stable on the two rigs  that im testing it on now, tweaked intensity and are getting slight faster speeds than GGS now aswell, overall seems quite okay.

Hm on that card adl should work , at least with blockchain drivers it works.

[korm]

do you get this with kernel 3? you have 512mb 6950?

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-

[zeii]

excuse me , noob question, what is ADL ?

[doktor83]

do you get this with kernel 3? you have 512mb 6950?

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-

try kernel 2

[doktor83]

excuse me , noob question, what is ADL ?

AMD Display Library, or an interface that can control the fans, clocks etc on the GPU.

[korm]

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-


try kernel 2

the same. +-1-2Hs
This miner works well with my RX460, but not for so old card

[fanisk21]

excuse me , noob question, what is ADL ?

AMD Display Library, or an interface that can control the fans, clocks etc on the GPU.

Yeah, and later if you could use ADL to use clocks and voltage control like Claymore's miners use, would be very nice xD!

Blockchain drivers are so annoying , always resetting voltage values. Need to flash them on bios and i don't like it to much.

[gazu]

do you get this with kernel 3? you have 512mb 6950?

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-

try kernel 2

I --usekernel 3

--kernel 3
SAPPHIRE ATI hd6870 1GB DDR5
Claymor 9.7 - 250 Hs
SRB 1.4.4 - 186 Hs+-
xmrstak - 280 Hs+-

--kernel 3
SAPPHIRE ATI DIRT3 6950 TO BIOS 6970 2GB DDR5
Claymor 9.7 - 350 Hs
SRB 1.4.4 - 320 Hs+-
xmrstak -  320 Hs+-

[dragonmike]

If anyone's using SRB miner to mine TRTL please check your stats on the pool. I just noticed the following:

https://bitcointalk.org/index.php?topic=2872287.msg35002699#msg35002699

Basically hashrate for both my rigs was lost in ether for several hours. So at this stage I don't know if the pool, the miner or anything else is at fault.

[bovineplane]

If anyone's using SRB miner to mine TRTL please check your stats on the pool. I just noticed the following:

https://bitcointalk.org/index.php?topic=2872287.msg35002699#msg35002699

Basically hashrate for both my rigs was lost in ether for several hours. So at this stage I don't know if the pool, the miner or anything else is at fault.

Mining TRTL is an adventure. The fast block times makes so many forks. Hard not to blame SRB for the occasional lost hash but also hard not to blame TRTL.

[korm]

do you get this with kernel 3? you have 512mb 6950?

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-

try kernel 2

I --usekernel 3

--kernel 3
SAPPHIRE ATI hd6870 1GB DDR5
Claymor 9.7 - 250 Hs
SRB 1.4.4 - 186 Hs+-
xmrstak - 280 Hs+-

--kernel 3
SAPPHIRE ATI DIRT3 6950 TO BIOS 6970 2GB DDR5
Claymor 9.7 - 350 Hs
SRB 1.4.4 - 320 Hs+-
xmrstak -  320 Hs+-

this is more interesting. What is your version of the drivers? Windows?
xmrstak - 280 Hs+- - new algo monero7?

[gazu]

do you get this with kernel 3? you have 512mb 6950?

--kernel 3
ATI hd6870 1GB DDR5 (OC, timings moded)
Claymor 9.7 - 290 Hs
SRB 1.4.4 - 154 Hs+-
xmrstak - 171 Hs+-

try kernel 2

I --usekernel 3

--kernel 3
SAPPHIRE ATI hd6870 1GB DDR5
Claymor 9.7 - 250 Hs
SRB 1.4.4 - 186 Hs+-
xmrstak - 280 Hs+-

--kernel 3
SAPPHIRE ATI DIRT3 6950 TO BIOS 6970 2GB DDR5
Claymor 9.7 - 350 Hs
SRB 1.4.4 - 320 Hs+-
xmrstak -  320 Hs+-

this is more interesting. What is your version of the drivers? Windows?
xmrstak - 280 Hs+- - new algo monero7?

drivers 14.4 windows 10 pro 64bit, monero7, my config xmr-stak is;

  // gpu: Barts memory:638
  // compute units: 14
  { "index" : 1,
    "intensity" : 224, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 7,
    "comp_mode" : true
  },