SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

i still don't understand what needs to be fixed, if ADL wasn't working you would get this :

GPU0:    486.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]

instead of this

GPU0:    486.0 H/S [T: 64c, RPM: 0, CC: 1215 MHz, MC: 1950 MHz]

[1713984247]

1713984247

[micax1]

i still don't understand what needs to be fixed, if ADL wasn't working you would get this :

GPU0:    486.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]

instead of this

GPU0:    486.0 H/S [T: 64c, RPM: 0, CC: 1215 MHz, MC: 1950 MHz]

[2018-05-05 20:29:03] GPU3:    587.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]

isn`t that what I got?

[doktor83]

oh tahiti now i see. probably does not support overdriveN, just older versions

[micax1]

oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.

[doktor83]

oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.

right, overdrive 5. atm overdriveN only supported by miner. when i finish the important stuff i will look into it.

[micax1]

oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.

right, overdrive 5. atm overdriveN only supported by miner. when i finish the important stuff i will look into it.

thanks man, and please take a look at fan speed control also.
currently it`s not setting speed at all. w 18.4.1 18.3.4 drivers tested at least on baffins (sapphire rx 550 2gb)
if you`ll need any help w testing let me know )
I am ready to test or provide you any logs.
hope you ll finish other stuff soon.
Thanks.

[Archangel9999]

Could you please add more details how to use the optional parameters like devcon because every time when i try to add them to the config file it is giving error

Thanks

[doktor83]

oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.

right, overdrive 5. atm overdriveN only supported by miner. when i finish the important stuff i will look into it.

thanks man, and please take a look at fan speed control also.
currently it`s not setting speed at all. w 18.4.1 18.3.4 drivers tested at least on baffins (sapphire rx 550 2gb)
if you`ll need any help w testing let me know )
I am ready to test or provide you any logs.
hope you ll finish other stuff soon.
Thanks.

Are you sure that this app works on Vegas ? I mean did you try it yourself?

[doktor83]

Could you please add more details how to use the optional parameters like devcon because every time when i try to add them to the config file it is giving error

Thanks

{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"restart_devices_on_startup" : true,
"restart_devices_on_startup_script" : "runmeafterdevconresettedgpus.bat"
}

you put runmeafterdevconresettedgpus.bat in the miner folder.

[CryptoPlay]

anyone have a good config for for a poweplay modded vega FE ? I heard people can get 2400 h/s even on heavy with these

"gpu_conf" :
[
   { "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 112, "worksize" : 16, "threads" : 1}
]

this basic config crashes my miner with the latest driver that works fine on cast

problem with cast i have like 7-10% in compute faliures on top of the dropping hash over time

I tried worksize 8 and threads 1

still crashed.

If i comment out the gpu_conf

it runs at default settings intesity 126 1 thread worksize 8 but hashrate is under 1700

Im using SRB to mine heavy. Intensity 60 will give u around 1450.

Vega FE dis 2300, thanks to user Iam9001 that found a way to do it.
basically u need Adrenalin latest with 16G per card to page file and this tool here:
https://bitcointalk.org/index.php?topic=2815803.0

The only miner software used so far was xmr-stak and thats the reason i wont post here full config.
I dont know IF someone managed to make SRB do that...u may try that tool with SRB and report back here so everyone will know.
Right now there are few users with this hash.
You can find more info here:
https://miningguidescom.slack.com/messages/C8SM9SHGV/

can you give me an invitation on slack? tnx

Do it require a invitation? I did not know that. There is a link here:
http://vega.miningguides.com/p/into-4-years-ago-i-was-building.html

And to Vega FE users...there is a new driver not tested by anyone yet.
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Pro-Software-Adrenalin-Edition-18.4.1-Release-Notes.aspx

[Marvell2]

anyone have a good config for for a poweplay modded vega FE ? I heard people can get 2400 h/s even on heavy with these

"gpu_conf" :
[
   { "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 112, "worksize" : 16, "threads" : 1}
]

this basic config crashes my miner with the latest driver that works fine on cast

problem with cast i have like 7-10% in compute faliures on top of the dropping hash over time

I tried worksize 8 and threads 1

still crashed.

If i comment out the gpu_conf

it runs at default settings intesity 126 1 thread worksize 8 but hashrate is under 1700

Im using SRB to mine heavy. Intensity 60 will give u around 1450.

Vega FE dis 2300, thanks to user Iam9001 that found a way to do it.
basically u need Adrenalin latest with 16G per card to page file and this tool here:
https://bitcointalk.org/index.php?topic=2815803.0

The only miner software used so far was xmr-stak and thats the reason i wont post here full config.
I dont know IF someone managed to make SRB do that...u may try that tool with SRB and report back here so everyone will know.
Right now there are few users with this hash.
You can find more info here:
https://miningguidescom.slack.com/messages/C8SM9SHGV/

can you give me an invitation on slack? tnx

Do it require a invitation? I did not know that. There is a link here:
http://vega.miningguides.com/p/into-4-years-ago-i-was-building.html

And to Vega FE users...there is a new driver not tested by anyone yet.
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Pro-Software-Adrenalin-Edition-18.4.1-Release-Notes.aspx

my problem starting off is the gpu conf crashes the miner even with default settings, im not personally getting 2k on cn heavy but i have heard its possible

[Dzeronimo]

Can someone please share RX 570 hash rate and settings for Cryptonight-heavy algo? I'm getting around 500 H/s with Intensity 0 (auto).

[sabrine015]

is this coming to GTX anytime soon ?

[SauteedEntrails]

hey 1st off great miner.
My issue is when i try to run it, it compiles submits a share or two and then a message comes up say " Something went wrong, i think you are up to something naughty and I have to stop you" and the miner shuts off

[UnclWish]

Can someone please share RX 570 hash rate and settings for Cryptonight-heavy algo? I'm getting around 500 H/s with Intensity 0 (auto).

It's low speed. Try setting intencity manual.

[UAGet]

Have anybody tested rx 560 2 and 4gb on Heavy? Wich hashrate do you get?

Asus RX 560 2Gb DualFan Unplugged (Elpida) 515 h/s for cn/cn-v7, 325 h/s for cn-heavy. Double threads and 13 intensity.
http://scrin.org/i/18/05/20180506020147.png

My friend has a Gigabyte RX 560 4Gb (micron ?). 450 h/s for cn-heavy with double threads and 0 intensity.

[Dzeronimo]

Can someone please share RX 570 hash rate and settings for Cryptonight-heavy algo? I'm getting around 500 H/s with Intensity 0 (auto).

It's low speed. Try setting intencity manual.

I tried many different combinations but cannot get more than 530 (intensity 30). I don't know how much to expect with cryptonight-heavy algo.

[henri2018]

Can someone please share RX 570 hash rate and settings for Cryptonight-heavy algo? I'm getting around 500 H/s with Intensity 0 (auto).

It's low speed. Try setting intencity manual.

I tried many different combinations but cannot get more than 530 (intensity 30). I don't know how much to expect with cryptonight-heavy algo.

Hi, mine is RX 570 4GB, intensity 0, double_thread false, give me 698 h/s.
Core clock 1175 mem clock 1900.

[roma__11]

CryptoNight Light Variant 1
it "lite" ?

[henri2018]

CryptoNight Light Variant 1
it "lite" ?

I don't think there is CryptoNight "Light" Variant 1.
There is CryptoNight-Lite Variant 1.
In SRB, you can use cryptonight_type = "litev7". Turtlecoin uses this algo.