SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Boss_One]

oh too soon, it gives invalid results

flash bios 6950 to 6970 and use this config; 360 h/s xmr-stak drivers 14.4

  // gpu: Cayman memory:1663
  // compute units: 24
  { "index" : 1,
    "intensity" : 874, "worksize" : 19,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },

Who Did u get the good bios I've 2 VTX 6950 and 1 Gigabyte iv'e try To flash with 4 different 6979 bios at reboot card bip ! I've try this method
https://www.techpowerup.com/articles/overclocking/vidcard/159

Thx

[1713884346]

1713884346

[1713884346]

1713884346

[1713884346]

1713884346

[doktor83]

Thanks. Any plans of integrating something a bit easier on the eyes into SRBMiner?

+1 Network error/stale shares/error compute same as castxmr.

I guess i have to put this on the wishlist too

[zeii]

Guys, how is the latest driver 18.4.1 faring compared to 18.3.4 using SRBminer?

I didn't realise the major Windows update would flatten the display drivers (f***ing Microsoft). I now have the choice between putting my previous driver on or use the latest.

Any experiences to share?

EDIT: oh well, what the hell, went with the new driver and... no big change in hashrate.

Good driver 18.4.1 with SRBMiner 1.5.2
RX 570 4GB Elpida V7Normal intensity 58, w8, T2  1022H/S
http://prntscr.com/jkqhp6

Could you please share your MOD?

For Elpida cclock=1252MHZ mclock=2040MHZ
777000000000000022AA1C00AC615B3CA0550F142C8C1506006004007C041420CA8980A9020004C 01712262B612B3715

How much core voltage and Memory voltage?
thank you.

[livada]

Any IDEA how automate ON HBC memory on vega?

ON start rig automatic:
1.disable and enable all card (devcon.exe disable "PCI\VEN_1002&DEV_687F")
2.Run OverdriveNTool.exe (OverdriveNTool.exe -r1 -r2 -r3 -p1profile1 -p2profile1 -p3profile1)
3. start srbminer

but HBC not work and HR is 1300 not 1500 on hevy adn i must stop miner  start srminer  intesity 60 close miner and start miner 56 intensity.

Any IDEA?

SOLVED

1-devcon.exe disable "PCI\VEN_1002&DEV_687F" (disable all vega)
2-devcon.exe enable "PCI\VEN_1002&DEV_687F" (enable all vega)
2-OverdriveNTool.exe -r1 -r2 -r3 -p1profile1 -p2profile1 -p3profile1
3-start resetHBC.bat (start miner with reset.config and 60 intesity)
timeout 60 (wait start reset.bat and kill reset.bat miner)
4-taskkill /F /IM "SRBMiner-CN.exe" (kill miner)
5- start srbminer.bat ( with intensity 56)
end

[doktor83]

[...]
+ If you want to use only one pool, or it's important for you to define a pool thru command line, not in pools.txt, you can do it now. Example:

SRBMiner-CN.exe --config config.txt --cpool pool:port --cwallet yourwallet --cpassword yourpassword
[...]

This option is working great. I can finally start miner with a parameter and also add pools and wallets to environment variables. Thanks!
Few hundred rigs just received new software

I know i'm pushing my luck, but if content of config.txt could also be used as a parameter then i would be totally fulfilled.

Wow, thanks a lot 

[lebuawu2]

Thanks. Any plans of integrating something a bit easier on the eyes into SRBMiner?

+1 Network error/stale shares/error compute same as castxmr.

I guess i have to put this on the wishlist too

is it possible to implement fastjobswitch option also like castxmr?

[doktor83]

Thanks. Any plans of integrating something a bit easier on the eyes into SRBMiner?

+1 Network error/stale shares/error compute same as castxmr.

I guess i have to put this on the wishlist too

is it possible to implement fastjobswitch option also like castxmr?

its possible but i don't want to, that just discards some shares that could possibly be accepted.

[lebuawu2]

Thanks. Any plans of integrating something a bit easier on the eyes into SRBMiner?

+1 Network error/stale shares/error compute same as castxmr.

I guess i have to put this on the wishlist too

is it possible to implement fastjobswitch option also like castxmr?

its possible but i don't want to, that just discards some shares that could possibly be accepted.

I understand it will discards some shares that could possibly be accepted, but I did compare before with and without that option in cast xmr using nanopool, in long term with that option got more shares accepted. I don't really understand also with nanopool but if you don't use that option using cast xmr you will get more outdated job.
anyway that is just an option so user will freely used it or not depend on their needed. but if you decided not to implemented then it's your choice also.

[doktor83]

AEON new algo is from block 962600 ~ 1 jun 2018 , get ready 

[spctrum]

Cryptonight lite v1 hashrat rx 470 4gb ?

[hesido]

Another bug report for Pool.txt reload (actually related to my previous bug report)

When reloading pools.txt, SRB miner reports the connected pool as the first pool in pools.txt, even if you are mining on the others.

Now, reload does not disconnect from the currently connected pool, and that's awesome, please do not change that behaviour. I use pools.txt to do coin switching, so I may be naturally mining on the 2nd or 3rd pool etc etc., they are not backup pools.

A delayed pool switch or an immediate pool switch to specific pool is also still a welcome addition, to avoid unnecessary connections and loss of hash

[ans76]

Guys, how is the latest driver 18.4.1 faring compared to 18.3.4 using SRBminer?

I didn't realise the major Windows update would flatten the display drivers (f***ing Microsoft). I now have the choice between putting my previous driver on or use the latest.

Any experiences to share?

EDIT: oh well, what the hell, went with the new driver and... no big change in hashrate.

Good driver 18.4.1 with SRBMiner 1.5.2
RX 570 4GB Elpida V7Normal intensity 58, w8, T2  1022H/S
http://prntscr.com/jkqhp6

Could you please share your MOD?

For Elpida cclock=1252MHZ mclock=2040MHZ
First timeng for Elpida from Mind163 ....B3715 https://forum.bits.media/index.php?/topic/38510-eth-xmr%D1%82%D0%B0%D0%B9%D0%BC%D0%B8%D0%BD%D0%B3%D0%B8rx470480570580-%D0%BE%D0%BF%D1%82%D0%B8%D0%BC%D0%B8%D0%B7%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%BD%D1%8B%D0%B5-%D1%82%D0%B0%D0%B9%D0%BC%D0%B8%D0%BD%D0%B3%D0%B8-%D0%B8-%D0%BA%D0%BE%D0%BD%D1%84%D0%B8%D0%B3%D0%B8-%D0%BF%D0%BE%D0%B4-%D0%BC%D0%B0%D0%B9%D0%BD%D0%B5%D1%80%D1%8B/

How much core voltage and Memory voltage?
thank you.

gpu - 906mV mem- 930mV

[doktor83]

Mini suggestion: If reloaded pool's first pool is different from the currently connected pool, change to the first pool instead of the second.

Now, reload does not disconnect from the currently connected pool, and that's awesome, please do not change that behaviour. I use pools.txt to do coin switching, so I may be naturally mining on the 2nd or 3rd pool etc etc., they are not backup pools.

Ok, i already made it work like you first suggested:
If on pool reload first pool on the list is the same as the currently running pool, no pool change occurs , but when pressing P the next pool is the second from the list.
But if after pools reload the first pool on the list isn't the currently running pool, immediate pool switch happens to the first pool from the new list.

[rusman2]

Hi @doktor83, I would really like to see more logging information in the log file. A starting point would be all the text that is yellow in the miner command window - Temp, Fan RPM, Clock Speeds, etc. There is also some info missing in the logfile when I hit 's'.

[Mind163]

Guys, how is the latest driver 18.4.1 faring compared to 18.3.4 using SRBminer?

I didn't realise the major Windows update would flatten the display drivers (f***ing Microsoft). I now have the choice between putting my previous driver on or use the latest.

Any experiences to share?

EDIT: oh well, what the hell, went with the new driver and... no big change in hashrate.

Good driver 18.4.1 with SRBMiner 1.5.2
RX 570 4GB Elpida V7Normal intensity 58, w8, T2  1022H/S
http://prntscr.com/jkqhp6

Could you please share your MOD?

For Elpida cclock=1252MHZ mclock=2040MHZ
777000000000000022AA1C00AC615B3CA0550F142C8C1506006004007C041420CA8980A9020004C 01712262B612B3715

This is my mod from the forum bits media. Still it is more correct to give references to the source, using someone else's work for free.

[doktor83]

V1.5.5
- No need for all that stuff in start.bat anymore, because watchdog can now restart the whole miner process without it
- Fixed kernels 3 & 4 for heavy algo
- Fixed OCL binary caching for Vega cards
- Added last job received info in stats and API
- Added 'job_timeout' parameter to pools config, it reconnects to pool if no job received for 'job_timeout' time (in seconds), default is 5 min
- Pool reload now checks if current pool is first in reloaded pools list, if not, it switches to first pool


+ Finally, start.bat has been cleaned, as of now miner (watchdog) can restart itself. (woohoo)
Now you can run multi instances of miner if you need to, without renaming hacks etc.. Every miner instance can restart itself.

+ Kernels 3 & 4 couldn't mine heavy algo, as no result was ever found. Fixed.

+ New parameter that goes in pools config is 'job_timeout'. If not set default is 300 sec (5 min). This can be helpful if for some reason the pool stops sending us new jobs, after the defined time the miner automatically reconnects to the pool.

+ Pressing 'r' reloads pools (defined through CMD line + pools list), and now if it finds the currently running pool on the first place in the new list, it just sets the pointer to it, and pressing 'p' to change pool will jump to the second pool from the list.
If the currently running pool is not same as the one on the first place on this new list, miner automatically connects to that new first pool.

[patrike]

V1.5.5
- No need for all that stuff in start.bat anymore, because watchdog can now restart the whole miner process without it

Hi and thanks for the updates.

Is it possible to configure SRBMiner to simply terminate in case it run into any crashes/issues - so it doesn't restart itself?

When using SRMMiner from applications like Awesome Miner, it's preferred to let Awesome Miner detect and restart any crashed/stopped mining processes.

Thanks!

[MaxMidnite]

V1.5.5
- No need for all that stuff in start.bat anymore, because watchdog can now restart the whole miner process without it
- Fixed kernels 3 & 4 for heavy algo
- Fixed OCL binary caching for Vega cards
- Added last job received info in stats and API
- Added 'job_timeout' parameter to pools config, it reconnects to pool if no job received for 'job_timeout' time (in seconds), default is 5 min
- Pool reload now checks if current pool is first in reloaded pools list, if not, it switches to first pool


+ Finally, start.bat has been cleaned, as of now miner (watchdog) can restart itself. (woohoo)
Now you can run multi instances of miner if you need to, without renaming hacks etc.. Every miner instance can restart itself.

+ Kernels 3 & 4 couldn't mine heavy algo, as no result was ever found. Fixed.

+ New parameter that goes in pools config is 'job_timeout'. If not set default is 300 sec (5 min). This can be helpful if for some reason the pool stops sending us new jobs, after the defined time the miner automatically reconnects to the pool.

+ Pressing 'r' reloads pools (defined through CMD line + pools list), and now if it finds the currently running pool on the first place in the new list, it just sets the pointer to it, and pressing 'p' to change pool will jump to the second pool from the list.
If the currently running pool is not same as the one on the first place on this new list, miner automatically connects to that new first pool.

Hey man, just downloaded this release for the first time trying the miner.
I'm using 6 RX580s overclocked correctly (no noob bios flashing shit)
I been using Claymore's CryptoNote AMD GPU Miner v11.3 with a total hash on Stellite coin of 5120
Now with your miner I'm getting 4841 only, much less hashrate. Intensity is 0

Double Thread Enabled Gives me 5100, this is closer to Claymore

Is there anything that can be done to try and tweak this for higher hash for me to switch to your miner.
Claymore one is currently dev free now.

[dragonmike]

- Fixed kernels 3 & 4 for heavy algo

+ Kernels 3 & 4 couldn't mine heavy algo, as no result was ever found. Fixed.

Sorry can you clarify that bit? What exactly are kernels 3 & 4? You mean GPUs 3 and 4 would not have found any share prior to this update?

[ans76]

.....B3715

This is my mod from the forum bits media. Still it is more correct to give references to the source, using someone else's work for free.

I Apologize, I will consider on the future. (corrected)