SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[livada]

any have vega 56 nitro+? hynix memory

HR on hevy? bios 56 or 64? setup overdirive?

thx

mine vega 56 red devil hynix memory bios 56.
cclock 1480/910 mclock 930/900 1490 h/s with intensity 60 and then 56.

good results for hynix.
powerlimit? -20%? softpowertable? how much it consumes electricity?

i have nitro 56 with 64 bios but not stable:(
referent card with samsung mem is the best-1550+ only 140-150W per card- 1100/900mv mem

powerlimit 0% I create custom softpowerplaytable from overdriventool,my understanding softpowerplaytable to make your undervolt work if you use overdriventool, but at the same time it will consume more power even if you not mining compare without sppt. Of course undervolt in overdriventool should above from sppt. My experience all non reff card if you modded with bios 64 will not stable even for samsung non reff. So better you flash back with original bios.

Not sure how much power consumption,but it should around 150w.

hmm. i think  powertable stabilize all rig. if  use only overdrive or only watmen u change only p6 and p7 and this is problem. mining is unstable. powertable  solved this and rig use  less power.

on referent card with 64bios not problem. vega 56  and vega 64  have identical ram . but in nitro is problem. vega 56 nitro have hynix  but vega 64 nitro have samsung. this is problem. latency time  CLS not identical. softable not identical. and rig is unstable.

SS for referent vega 56 with 64 bios . 515-520W from the wall. no errors - STABLE
https://image.prntscr.com/image/g_Pd1k1ISkSt0zNW7PGz2Q.jpg

nitro/hxnix is problem. I'm going to play a bit with this bios so  I'll be back to the original 56 bios

@DOCTOR- pls put  version miner in statistic (S)

[1713916339]

1713916339

[1713916339]

1713916339

[1713916339]

1713916339

[1713916339]

1713916339

[1713916339]

1713916339

[nordmann666]

cant get higher...why?

[livada]

cant get higher...why?

https://imgur.com/a/qZ1bkS5

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

[nordmann666]

cant get higher...why?

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

[doktor83]

hi guys im using 1.5.3 srb

i still cant get set how to turn off auto fan

if i start mining it will always set auto

any help?

many thanks

what do you want to do ? Set fan speed ?

yes
im setting with msi ab
but if i start srb it always set fan to auto in msi?
do we have an option to set auto fan = false?

hi doc, any clue?? thanks

If you have set any of these, miner will take over control of fans :

- target_temperature
- target_fan_speed

[livada]

cant get higher...why?

https://imgur.com/a/qZ1bkS5

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

but this is it. put freq gpu and mem litle down. you see last post. 1442 or 1427 905/910 mv and mem 1990 905 -910mv and try again

you have samsung memory? referent card vega 56 with 64 bios?

[nordmann666]

cant get higher...why?

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

but this is it. put freq gpu and mem litle down. you see last post. 1442 or 1427 905/910 mv and mem 1990 905 -910mv and try again

you have samsung memory? referent card vega 56 with 64 bios?

Referent 56 with 64 BIOS (one MSI and one Sapphire)

your recomment settings:

first startet with Intensity 60
https://imgur.com/a/EtiGepS

than close Miner and start with 56
https://imgur.com/a/P106x8o

[ALEX_RAA]

Hey Doctor

is it possible to do that miner show error messages in friendly english coding system and not depend on which one of languages of OS i use ?
All other miners don't have that problem, it's hard to do that?

[livada]

cant get higher...why?

https://imgur.com/a/qZ1bkS5

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

but this is it. put freq gpu and mem litle down. you see last post. 1442 or 1427 905/910 mv and mem 1990 905 -910mv and try again
try this. give more power for memory and gpu- etc 930. if work go down with power

you have samsung memory? referent card vega 56 with 64 bios?

Referent 56 with 64 BIOS (one MSI and one Sapphire)

your recomment settings:

first startet with Intensity 60
https://imgur.com/a/EtiGepS

than close Miner and start with 56
https://imgur.com/a/P106x8o

this is to small hR with 60 -i have 1350 on 60 intensity and 1550 on 56

You disable crosfire  in regedit?

u have samsung memory? use gpuz and  see your memory.

[nordmann666]

cant get higher...why?

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

but this is it. put freq gpu and mem litle down. you see last post. 1442 or 1427 905/910 mv and mem 1990 905 -910mv and try again

you have samsung memory? referent card vega 56 with 64 bios?

Referent 56 with 64 BIOS (one MSI and one Sapphire)

your recomment settings:

first startet with Intensity 60
https://imgur.com/a/EtiGepS

than close Miner and start with 56
https://imgur.com/a/P106x8o

this is to small hR with 60 -i have 1350 on 60 intensity and 1550 on 56

You disable crosfire  in regedit?

u have samsung memory? use gpuz and  see your memory.

yes...two reference cards with Samsung ram and yes...on both cards Crossfire off with regedit

tried with HBM on / off / on with 11GB or 16GB

dont know whats "wrong"

i normal V7 i got 1950-2000 hs with both cards

[doktor83]

Hey Doctor

is it possible to do that miner show error messages in friendly english coding system and not depend on which one of languages of OS i use ?
All other miners don't have that problem, it's hard to do that?

miner shows its own messages on english, but its works with some windows components (like ws2_32.dll) which return those messages.

[livada]

cant get higher...why?

https://imgur.com/a/qZ1bkS5

yes- this is samsung memory.

start miner with  "intensity" : 60,
close miner and start miner with "intensity" : 56,

doesnt changed the hasrates in my case

but this is it. put freq gpu and mem litle down. you see last post. 1442 or 1427 905/910 mv and mem 1990 905 -910mv and try again

you have samsung memory? referent card vega 56 with 64 bios?

Referent 56 with 64 BIOS (one MSI and one Sapphire)

your recomment settings:

first startet with Intensity 60
https://imgur.com/a/EtiGepS

than close Miner and start with 56
https://imgur.com/a/P106x8o

this is to small hR with 60 -i have 1350 on 60 intensity and 1550 on 56

You disable crosfire  in regedit?

u have samsung memory? use gpuz and  see your memory.

yes...two reference cards with Samsung ram and yes...on both cards Crossfire off with regedit

tried with HBM on / off / on with 11GB or 16GB

dont know whats "wrong"

i normal V7 i got 1950-2000 hs with both cards

u use  disable enable gpu before start miner?

before i use xmrstak for start HBM memory but now work only use intesity 60. use xmr-stak and try with him

i use this option in xmr-stak for restar HBM memory

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 924, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },

or this

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 12, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 904, "worksize" : 12, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 16, "comp_mode" : true },

start with this  wait 1 min and  try srb miner with 56- if dont work try other .

this method work for me. Why ? i dont now but work. and work intesity 60

[vietql1]

that good

[666damien666]

Hello, I have the problem in between, the miner complained that he overheated and then want to restart. then the mining rig crashes. I have 5 Vega 64 in the rig and use version 1.5.5.1, do you have an idea? What's weird is that I have a second rig with 3 x Vega 64 and this is crashes at the same time. Sometimes the whole works without problems 3 days...

[ALEX_RAA]

Hey Doctor

is it possible to do that miner show error messages in friendly english coding system and not depend on which one of languages of OS i use ?
All other miners don't have that problem, it's hard to do that?

miner shows its own messages on english, but its works with some windows components (like ws2_32.dll) which return those messages.

can you give advise please which language and where exactly in OS settings (examp for win10) i should use to get correct error messages?
p.s. and i think it will be great if you add it to FAQ in the start if this thread

[m1dz0]

Does anyone have xfx vega 56 double edition?
memory, temps, hashrates...

[abhiseshakana]

Hello, I have the problem in between, the miner complained that he overheated and then want to restart. then the mining rig crashes. I have 5 Vega 64 in the rig and use version 1.5.5.1, do you have an idea? What's weird is that I have a second rig with 3 x Vega 64 and this is crashes at the same time. Sometimes the whole works without problems 3 days...

does it say "critical shutdown, temperature reach 90C" ?? i had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine.

[doktor83]

Hello, I have the problem in between, the miner complained that he overheated and then want to restart. then the mining rig crashes. I have 5 Vega 64 in the rig and use version 1.5.5.1, do you have an idea? What's weird is that I have a second rig with 3 x Vega 64 and this is crashes at the same time. Sometimes the whole works without problems 3 days...

does it say "critical shutdown, temperature reach 90C" ?? i had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine.

have you checked, maybe it really reached 90c ? 

[abhiseshakana]

Hello, I have the problem in between, the miner complained that he overheated and then want to restart. then the mining rig crashes. I have 5 Vega 64 in the rig and use version 1.5.5.1, do you have an idea? What's weird is that I have a second rig with 3 x Vega 64 and this is crashes at the same time. Sometimes the whole works without problems 3 days...

does it say "critical shutdown, temperature reach 90C" ?? i had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine.

have you checked, maybe it really reached 90c ? 

No, it doesnt reached 90c .. i'm facing this issue a few minutes after the miner program started. And on srbminer temperature display, all of my GPU under 60c.

I think this issue belong to windows 1803 update...

[eduardooaz]

why do you guys use SRB miner instead of CAST?
SRB does not offer any performance advantage, it is more complicate to set up and actually performance is very erratical, since any time you restart it, you may get a different hash rate, at least for me.

I have been using it for a couple of days on 2 rigs one with Vegas and the other with RX580 and I could not find any plus VS Cast.
Just wondering if I am missing something.

For me was giving error for my rx 580 build, i think is better for vegas
And SRB got great and fair fee, i think thats important.