SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[mokrejbandita]

Any1 experiencing problem, that after couple of hours using algoswitching, when the algo is changed from normal v7 to heavy/bittube/have etc, the hashrate becomes lower? It happens with all my rigs (vega, 570, 480, 580). Using auto intensity. When I see lower hashrate, quit the miner, run it again, the hashrate becomes normal again.

Any ideas? Thank you.

[1714024220]

1714024220

[1714024220]

1714024220

[kyogi14]

Whats a good setting for intensity and threads with rx 480?  I can get 1000h/s on castxmr but on srb i am getting around 850-865.  My vegas are looking great though >2000.

[justoiurii]

Whats a good setting for intensity and threads with rx 480?  I can get 1000h/s on castxmr but on srb i am getting around 850-865.  My vegas are looking great though >2000.

my SRB intensity is 55 and I get 1010 h/s with bc drivers

[ikyo]

Hi, Thanks for this awesome miner!
But two of rigs throws the following issue today and restarted :
"The Interactive Services Detection service terminated with the following error: Incorrect function."

- <EventData>
  <Data Name="param1">Interactive Services Detection</Data>
  <Data Name="param2">%%1</Data>
  <Binary>5500490030004400650074006500630074000000</Binary>
  </EventData>
  </Event>

Is that any solution for this issue =)?

Did the miner completely crash or just a speed drop?

[doktor83]

Hi, Thanks for this awesome miner!
But two of rigs throws the following issue today and restarted :
"The Interactive Services Detection service terminated with the following error: Incorrect function."

- <EventData>
  <Data Name="param1">Interactive Services Detection</Data>
  <Data Name="param2">%%1</Data>
  <Binary>5500490030004400650074006500630074000000</Binary>
  </EventData>
  </Event>

Is that any solution for this issue =)?

I'm not sure this is miner related at all as :

Interactive Services Detection (the blinking button on the taskbar). Blinking button on the taskbar

[jasonyslai]

Hi, Thanks for this awesome miner!
But two of rigs throws the following issue today and restarted :
"The Interactive Services Detection service terminated with the following error: Incorrect function."

- <EventData>
  <Data Name="param1">Interactive Services Detection</Data>
  <Data Name="param2">%%1</Data>
  <Binary>5500490030004400650074006500630074000000</Binary>
  </EventData>
  </Event>

Is that any solution for this issue =)?

Did the miner completely crash or just a speed drop?

Hi ikyo, the rigs restarted itself. It seems like a blue screen crash error.

Hi doktor,
  I have no idea =(..The latest event log of two rigs show exactly the same error message and restarted.
  They are running fine so far after the crash.
   

[sweetydady]

hi everyone, I feel it is strange that my RXs 470 nitro + 8gb are making 920 h/s at CN Heavy, and only 860 H/s at Normal V7..increasing intensity won't help..any thoughts? SRB 1.6.6

[doktor83]

I added a full copy paste example on how to use algo switching on Monero Ocean.
Check it out on the first page

[Elder III]

I added a full copy paste example on how to use algo switching on Monero Ocean.
Check it out on the first page

Thanks for sharing that, it will save a fair bit of time for those interested in testing it out.

[bucah]

Hi all,

I was wondering why some of my vegas have lower hashrate of up to 300Hs compare with others when mining fast algo?

[2018-08-16 11:38:54] Pool sent a new job (ID: LiMmZRHeK8LOjapQjqJ67poFTTn0) [fast]
[2018-08-16 11:38:54] GPU0 :    3742 H/s [T: 55c, RPM: 2079, CC: 1407 MHz, MC: 950 MHz][BUS:7]
[2018-08-16 11:38:54] GPU1 :    3553 H/s [T: 52c, RPM: 2993, CC: 1407 MHz, MC: 950 MHz][BUS:16]
[2018-08-16 11:38:54] GPU2 :    3868 H/s [T: 58c, RPM: 4273, CC: 1407 MHz, MC: 950 MHz][BUS:10]
[2018-08-16 11:38:54] GPU3 :    4062 H/s [T: 57c, RPM: 4081, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-08-16 11:38:54] GPU4 :    3891 H/s [T: 58c, RPM: 3357, CC: 1407 MHz, MC: 950 MHz][BUS:3]
[2018-08-16 11:38:54] Total:    19116 H/s

When mining the other algos there is no significant different

[abg00]

I added a full copy paste example on how to use algo switching on Monero Ocean.
Check it out on the first page

moneroocean realy support heavy algo? reject auth on heavy

[N2DCRYPT]

Hi all,

I was wondering why some of my vegas have lower hashrate of up to 300Hs compare with others when mining fast algo?

[2018-08-16 11:38:54] Pool sent a new job (ID: LiMmZRHeK8LOjapQjqJ67poFTTn0) [fast]
[2018-08-16 11:38:54] GPU0 :    3742 H/s [T: 55c, RPM: 2079, CC: 1407 MHz, MC: 950 MHz][BUS:7]
[2018-08-16 11:38:54] GPU1 :    3553 H/s [T: 52c, RPM: 2993, CC: 1407 MHz, MC: 950 MHz][BUS:16]
[2018-08-16 11:38:54] GPU2 :    3868 H/s [T: 58c, RPM: 4273, CC: 1407 MHz, MC: 950 MHz][BUS:10]
[2018-08-16 11:38:54] GPU3 :    4062 H/s [T: 57c, RPM: 4081, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-08-16 11:38:54] GPU4 :    3891 H/s [T: 58c, RPM: 3357, CC: 1407 MHz, MC: 950 MHz][BUS:3]
[2018-08-16 11:38:54] Total:    19116 H/s

When mining the other algos there is no significant different

I can verify that this happens for me as well, usually always 2 on an 8 card machine, all cards identical.

[Zazax21]

I added a full copy paste example on how to use algo switching on Monero Ocean.
Check it out on the first page

moneroocean realy support heavy algo? reject auth on heavy

It does man, i've tryed it myself, but you have to make 3 different configs hevan, heavy, bittubev2.

[doktor83]

I will check this fast algo thing.

You guys have enough size for pagefile?

[Amgine]

Dok,

I have a problem when using algo switch

here's the crashlog.

[2018-08-16 21:04:46] Miner version: 1.6.6
[2018-08-16 21:04:46] Windows version: 10.0 build 17134
[2018-08-16 21:04:47] Video driver version: 24.20.11021.1000
[2018-08-16 21:04:52] AMD Platform ID: 0
[2018-08-16 21:04:52] AMD platform FOUND
[2018-08-16 21:04:52] Found 4 AMD devices
[2018-08-16 21:04:52] CPU AES-NI: TRUE
[2018-08-16 21:04:52] GPU0: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU1: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU2: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU3: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU4: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU5: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU6: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] GPU7: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] ADL is enabled
[2018-08-16 21:04:52] CryptonightV7 mode enabled
[2018-08-16 21:04:52] DevFee pool SET
[2018-08-16 21:04:52] DevFee address SET
[2018-08-16 21:04:52] Starting init of mining threads
[2018-08-16 21:04:53] Loading kernel for DEVICE BUS ID 34 ...
[2018-08-16 21:04:54] Stopping miner process
[2018-08-16 21:04:54] Loading kernel for DEVICE BUS ID 34 ...

If I run each algo seperately they run fine after compiling kernel. but if I use algoswitch, the miner closes itself.

[doktor83]

Dok,

I have a problem when using algo switch

here's the crashlog.

[2018-08-16 21:04:46] Miner version: 1.6.6
[2018-08-16 21:04:46] Windows version: 10.0 build 17134
[2018-08-16 21:04:47] Video driver version: 24.20.11021.1000
[2018-08-16 21:04:52] AMD Platform ID: 0
[2018-08-16 21:04:52] AMD platform FOUND
[2018-08-16 21:04:52] Found 4 AMD devices
[2018-08-16 21:04:52] CPU AES-NI: TRUE
[2018-08-16 21:04:52] GPU0: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU1: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU2: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU3: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU4: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU5: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU6: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] GPU7: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] ADL is enabled
[2018-08-16 21:04:52] CryptonightV7 mode enabled
[2018-08-16 21:04:52] DevFee pool SET
[2018-08-16 21:04:52] DevFee address SET
[2018-08-16 21:04:52] Starting init of mining threads
[2018-08-16 21:04:53] Loading kernel for DEVICE BUS ID 34 ...
[2018-08-16 21:04:54] Stopping miner process
[2018-08-16 21:04:54] Loading kernel for DEVICE BUS ID 34 ...

If I run each algo seperately they run fine after compiling kernel. but if I use algoswitch, the miner closes itself.

as all your intensities are same, drop the duplicateid stuff from cmd and put 2 threads in config. Algo switching doesnt like cmd parameters, i will try to fix that

[dragonmike]

I will check this fast algo thing.

You guys have enough size for pagefile?

Same issue here. Plenty of size for the pagefile too.

[Amgine]

as all your intensities are same, drop the duplicateid stuff from cmd and put 2 threads in config. Algo switching doesnt like cmd parameters, i will try to fix that

I removed --enableduplicateguid from config but miner still close.

here's the crashlog

Code:

[2018-08-16 21:39:25] Miner version: 1.6.6
[2018-08-16 21:39:25] Windows version: 10.0 build 17134
[2018-08-16 21:39:25] Video driver version: 24.20.11021.1000

only 3 lines now

here's the start.bat

Code:

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0

cls
SRBMiner-CN.exe --sendallstales --config config-normalv7.txt --pools pools-algos.txt --logfile crashlog.txt --usealgoswitching
pause

i remove duplicate line from the config too

Code:

{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"min_rig_speed" : 7500,
"min_rig_speed_duration" : 60,
"gpu_conf" : 
[ 
{ "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 77, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2},
]

/* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */
/* YOU CAN FIND THEM IN THE README FILE */
}

If I remove the --usealgoswitching it will run

[doktor83]

I will check this fast algo thing.

You guys have enough size for pagefile?

Same issue here. Plenty of size for the pagefile too.

Is this happening only on vegas?

[bucah]

I will check this fast algo thing.

You guys have enough size for pagefile?

I set 60GB - 90GB on virtual memory

And I have only Vega and just 1 RX550, sorry