SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

PITCAIRN guys, re-download 1.6.8, compilation fixed 

[1713567815]

1713567815

[1713567815]

1713567815

[1713567815]

1713567815

[1713567815]

1713567815

[sky2018miner]

good job
everything is working
thank you very much

[2018-10-12 10:43:50] Miner version: 1.6.8
[2018-10-12 10:43:50] Windows version: 10.0 build 16299
[2018-10-12 10:43:50] Video driver version: 24.20.11019.1004
[2018-10-12 10:43:58] AMD Platform ID: 0
[2018-10-12 10:43:58] AMD platform FOUND
[2018-10-12 10:43:58] Found 6 AMD devices
[2018-10-12 10:43:58] CPU AES-NI: FALSE
[2018-10-12 10:43:58] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 10:43:58] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-12 10:43:58] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 10:43:58] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-12 10:43:58] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 12.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 10:43:58] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 28.0][W: 4][T: 2][K: 1][BUS: 8]
[2018-10-12 10:43:58] ADL is enabled
[2018-10-12 10:43:58] CryptonightV7 mode enabled
[2018-10-12 10:43:58] Starting init of mining threads
[2018-10-12 10:43:58] Heating up system, please wait...
[2018-10-12 10:43:58] Created OCL context
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 7 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 7 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 10 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 10 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 3 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 3 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 9 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 9 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 4 (Thread
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 4 (Thread
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 4 (Thread
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 8 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 8 ...
[2018-10-12 10:44:01] ADL initialised successfully!
[2018-10-12 10:44:01] Finished init of mining threads
[2018-10-12 10:44:01] Main pool: xmr-eu1.nanopool.org:14444
[2018-10-12 10:44:01] Gpu watchdog started
[2018-10-12 10:44:01] API disabled
[2018-10-12 10:44:01] json_send: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.6.8","rigid":""}}
[2018-10-12 10:44:01] json_receive: {"id":1,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"0707aca181de05cd0c1ca25cd8b65e8cda27426fe4f8e2e7c7dc6c99165557b4113ccf23a3dfe20 00000009160657ad106a7242c8bf36e330bdfcb72fcdf4a167ef857d6b7b35256611e7803","job_id":"9390","target":"cf8b0000"},"status":"OK"},"error":null}
[2018-10-12 10:44:01] Connected to xmr-eu1.nanopool.org:14444
[2018-10-12 10:44:01] sock_ready: User logged in
[2018-10-12 10:44:01] pool_have_job: Pool sent a new job (ID: 9390)
[2018-10-12 10:44:08] miner_result: Sending user result to pool
[2018-10-12 10:44:08] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"9390","nonce":"14aeaa6a","result":"870fae4ec6012a9d74c6d243022d1c29f8b8e32a6f9d825324aeffcaa7370000"}}
[2018-10-12 10:44:08] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-10-12 10:44:08] miner_result: Pool accepted result 0x000037A7
[2018-10-12 10:44:23] hashrate: GPU0: 440 H/s [BUS:7]
[2018-10-12 10:44:24] ADL2_Overdrive5_FanSpeed_Get for ADL index 63 failed.
[2018-10-12 10:44:24] hashrate: GPU1: 440 H/s [BUS:10]
[2018-10-12 10:44:24] hashrate: GPU2: 468 H/s [BUS:3]
[2018-10-12 10:44:24] ADL2_Overdrive5_FanSpeed_Get for ADL index 79 failed.
[2018-10-12 10:44:24] hashrate: GPU3: 434 H/s [BUS:9]
[2018-10-12 10:44:24] hashrate: GPU4: 406 H/s [BUS:1]
[2018-10-12 10:44:24] hashrate: GPU5: 542 H/s [BUS:8]
[2018-10-12 10:44:24] hashrate: Total: 2730 H/s
[2018-10-12 10:44:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707e8a181de05cd0c1ca25cd8b65e8cda27426fe4f8e2e7c7dc6c99165557b4113ccf23a3dfe20 00000003883fa04450e91c6d2cd0f510127c1940bbb8ed6407e1007304ee72e8edd30cc07","job_id":"9391","target":"cf8b0000"}}
[2018-10-12 10:44:38] pool_have_job: Pool sent a new job (ID: 9391)

[doktor83]

good job
everything is working
thank you very much


[2018-10-12 10:43:58] CPU AES-NI: FALSE
[2018-10-12 10:43:58] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 10:43:58] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-12 10:43:58] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 10:43:58] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-12 10:43:58] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 12.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 10:43:58] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 28.0][W: 4][T: 2][K: 1][BUS: 8]

now this is a mixed rig 

[abg00]

PITCAIRN guys, re-download 1.6.8, compilation fixed 

auto 22-23 low rate/ need 28-30

[jazz1984]

PITCAIRN guys, re-download 1.6.8, compilation fixed 

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

[nichevo]

PITCAIRN guys, re-download 1.6.8, compilation fixed 

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

[jazz1984]

PITCAIRN guys, re-download 1.6.8, compilation fixed  

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

Its really interesting result: on 1000/1500 hashrate increased to 495 H/s,
but increasing the memory frequency by at least 1mhz above 1500 results in a drop of hashrate to above 430-440. For now works at 1000/1500, if this clocks will be stable then later try to overclock the core. Thank you a lot, i thought that memory overclocking on this video card does not lead to improved results without modifying the timings.

[abg00]

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

some card dont work mem 1500
need try. but possible core 1150

r7-265 card work 1200\1500

[_ap_]

1.6.8 hashrates is lower for me

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8.

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

[doktor83]

1.6.8 hashrates is lower for me

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8.

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

I don't know what is happening there but i ran 2 tests on TUBE:

Intensity:28
Worksize:8
Threads:2

Rx470 4g Sapphire Nitro [1050/1950]
1.6.7 : 588 HS
1.6.8 : 613 HS

This is the latest 1.6.8 i uploaded today.

[_ap_]

1.6.8 hashrates is lower for me

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8.

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

Set intensity by hand, i lowered the auto intensity values a little bit.
You probably know the previous auto intensity value.

I tried these (in chronological order):
auto intensity 1.6.7 = 29. Results: 760/740
auto intensity 1.6.8 = 29. Results: 736/706
manual intensity 1.6.8 = 29. Results: 748/730
manual intensity 1.6.8 = 29.5 Results: 760/740
manual intensity 1.6.8 = 29.9 Results: crash miner
manual intensity 1.6.8 = 29.7 Results: crash miner
manual intensity 1.6.8 = 29.6 Results: windows crash
manual intensity 1.6.8 = 29.6 again. Results: crash miner

So, the hashrate with manual mode are same with the 1.6.7 auto mode.

Thanks!

[_ap_]

1.6.8 hashrates is lower for me

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8.

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

I don't know what is happening there but i ran 2 tests on TUBE:

Intensity:28
Worksize:8
Threads:2

Rx470 4g Sapphire Nitro [1050/1950]
1.6.7 : 588 HS
1.6.8 : 613 HS

This is the latest 1.6.8 i uploaded today.

My card settings (with the newest miner):

rx 470 nitro+ 4gb
rom modded: otcp, gpu: 1300MHz/950mv, mem: 2000MHz/850mv
afterburner settings: -15% power limit
miner: I=29,5, T=2, WS=8

rx 570 nitro+ 4gb
rom modded: otcp, gpu 1340MHz/1000mv, mem: 2000MHz/850mv
afterburner settings: -15% power limit
miner: I=29,5, T=2, WS=8

Total consumption of the two cards: 190W (470=95-100W, 580=90-95W)

https://kepkuldes.com/images/d5a6676678722ca7295347b34414ffd8.png

[cristian13]

Can anyone help me out with this situation ?

I had BETA drivers installed, everything was working, and i wanted to update the drivers to 18.6.1.
Removed BETA drivers with DDU, installed 18.6.1 drivers but now SRB Miner does not start.

http://prnt.sc/l5fi4q


The pointer blinks, but nothing ....

Anyone experienced something similar ?

[_ap_]

Can anyone help me out with this situation ?

I had BETA drivers installed, everything was working, and i wanted to update the drivers to 18.6.1.
Removed BETA drivers with DDU, installed 18.6.1 drivers but now SRB Miner does not start.

http://prnt.sc/l5fi4q


The pointer blinks, but nothing ....

Anyone experienced something similar ?

maybe atidagpatcher?

[cristian13]

Can anyone help me out with this situation ?

I had BETA drivers installed, everything was working, and i wanted to update the drivers to 18.6.1.
Removed BETA drivers with DDU, installed 18.6.1 drivers but now SRB Miner does not start.

http://prnt.sc/l5fi4q


The pointer blinks, but nothing ....

Anyone experienced something similar ?

maybe atidagpatcher?

Fixed it moments ago by reinstalling Intel Graphics Driver 

[hlbcal]

FIXED 1.6.8 IS UP AGAIN ON MEGA

Hopefully this is the last fix of 1.6.8, and it should compile now on pitcairns, hawaiis etc..

I also rewrote the resources freeing code on miner shutdown/restart, so it may take now a little longer to close the miner, but this should solve the problems with driver sometimes crashing on miner close.

If you want to use the old, faster shutdown method, you can use the --forcedshutdown parameter , added in start.bat

Also i changed my mind and no more normal and maxi versions, only maxi. Because no one notices the big message on the first page that says which drivers should be used

Please report if hawaiis and pitcairns compile now.
Thanks

Hi dok,

I still have the same issue. GPU hash rate drop to zero and miner crashed. V1.6.7 is stable, it does not have such issue.

[2018-10-12 00:08:48] watchdog: GPU1 [BUS: 1] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU2 [BUS: 4] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU3 [BUS: 2] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU4 [BUS: 7] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU5 [BUS: 8] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU6 [BUS: 3] hashing speed is 0 H/S
[2018-10-12 00:09:52] watchdog: GPU crash detected, miner will try to restart
[2018-10-12 00:09:52] Restarting miner process


[2018-10-12 00:09:53] Miner version: 1.6.8
[2018-10-12 00:09:53] Windows version: 10.0 build 16299
[2018-10-12 00:09:53] Video driver version: 24.20.11021.1000
[2018-10-12 00:11:36] AMD Platform ID: 1
[

You should lower intensity until your driver won't crash, so hashrate won't fall to 0 and miner won't restart.
It can happen that after driver crash opencl can't be initialised.
Try set that startup script and set overdriventtol to reset gpu's every time before run, maybe that will help.

Hi dok,

I tried to lower intensity, same problem. V1.6.7 works well on the same hardware and GPU driver. I'm pretty sure it is due to something different in V1.6.8

[cingibi]

@doktor83

Hey doc

--resetvega options only vega cards or all amd cards (rx580,560)

[Bael]

Hi

I am new using the miner.

I have been trying to try to change the intensities, I left it under a few hours to configure the default intensity.

Then apply intensities as recommended here: SRBMiner-CN.exe --sendallstales --ccryptonighttype normalv7 --cgpuid 0,1,2,3,4 --cgpuintensity 56,56,55,58,55 --cgputhreads 2, 2,2,2,2 --cpool xmr-eu1.nanopool.org:14444 --cwallet your-wallet

Use radeon 580 and 570, probe different intensities between 52 and 60 but I did not see any variation.

I have the same hashrate in automatic mode that I applied the intensities manually.

What am I doing wrong?

Apologies for speaking bad english.

Greetings guys!

[Bojcha]

PITCAIRN guys, re-download 1.6.8, compilation fixed  

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

Its really interesting result: on 1000/1500 hashrate increased to 495 H/s,
but increasing the memory frequency by at least 1mhz above 1500 results in a drop of hashrate to above 430-440. For now works at 1000/1500, if this clocks will be stable then later try to overclock the core. Thank you a lot, i thought that memory overclocking on this video card does not lead to improved results without modifying the timings.

That's normal since after 1500MHz on memory you are entering other strap which is less tighten.

[logicalray77]

Hi everyone,

I`m trying to run the miner on a 12card RX580 rig. I`m receiving these errors.
Please could you help.

"Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqeueNDRangeKernel"

I tried both V1.6.7 and V1.6.8 and drivers 18.6.1

I just see red everywhere.

Thanks