SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Marvell2]

Has the Claymore monitor tool for SRB miner been fixed yet ?  I think the newest SRB release broke it

ClayConn works ok. is there another tool?
PS API settings moved from config to start string, like SRBMiner-CN.exe --config config.txt --pools pools.txt --logfile logs\%date%-%random%.log --apienable --apiport 21555 --apirigname rig10

clayconn wasn’t working for me, I guess i was using the wrong config files , will try again tomorrow

[1713998544]

1713998544

[1713998544]

1713998544

[1713998544]

1713998544

[1713998544]

1713998544

[1713998544]

1713998544

[Marvell2]

dok, my Vega FE edition is not able to push beyond  ~1300 h/s .

i even let the card compile kernels again.

Can anyone suggest solution ?

Thanks

same issue here, It might be a bug c8 implementations? I see even worse results with cast xmr
I tried rasing the intesity to 140 and i got up to 1500 but , something is really off with these frontiers

[playfast]

I have a rx560 rig using 18.6.1 drivers, on v8 they all went down to ~380-400 h/s with the same settings from v7 (500-520 h/s)
I had power limit at -10% with v7, on v8 I can get back to ~430-460 h/s just by raising the power limit to +10%
Some cards got a small boost when I increased virtual memory from 16 gb to 20 gb. Haven't tried to change the intensity and worksize yet, doubt they will make any difference. v8 definitely needs more power and virtual memory than v7 to alleviate hash loss.

[coke15]

hi

i was virulent few month ago, with the "lost" hasrhate between rig and pool.

Now with the 1.6.8 ,the hashrate is good.

nice to see you play game,thanks

[Lucky - Luciano]

Hi, you can use SRBminer: https://bitcointalk.org/index.php?topic=3167363.0

Low fee, great speed, 950h on my RX580s and supports v8 fork.

Damn, I have only  836 H/s. What settings do you use? These are my settings:

{
"cryptonight_type" : "normalv8",
"intensity" : 96,
"worksize" : 8,
"double_threads" : true
}

[Bojcha]

Hi, you can use SRBminer: https://bitcointalk.org/index.php?topic=3167363.0

Low fee, great speed, 950h on my RX580s and supports v8 fork.

Damn, I have only  836 H/s. What settings do you use? These are my settings:

{
"cryptonight_type" : "normalv8",
"intensity" : 96,
"worksize" : 8,
"double_threads" : true
}

intens 58 and worksize 16

[camchimonline]

How to disable 1 gpu, dont use press 0-9 key
Thank

[logicus]

I am using latest version 1.6.8  and ati drivers 18.6.1. Mining rig is 4 x Vega 56 (flashed with Vega 64 bios).
Core clock 1450@900mv memory clock 1100@900mv . /Hellae's powerplay table mod/
v7 - 8200 h/s @ 700 W at the wall.
v8 - 7800 h/s @ 800 W at the wall.

config_normalv8.txt
{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 55,
"shutdown_temperature" : 80,
"persistent_memory" : true,
/*"gpu_conf" :
[
   { "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 120, "worksize" : 16, "threads" : 2}
]*/
}

Check https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

[coke15]

I have 5 vega56 Adrenalin 18.6.1
3 gfx 900 give by 1850 ~
2 gfx 901 give 1000 ~
what is the problem?

why my vega 901 give 1000 h/s
Vega 900 1800 h/s
How to raise hashrate on 901?

If you are using the binary kernels try to rename that folder and let the miner compile it again.

hi same here:
not working for me:
vega 901 give 1200
vega 900 give 1200
?

[tvukoman]

I am using latest version 1.6.8  and ati drivers 18.6.1. Mining rig is 4 x Vega 56 (flashed with Vega 64 bios).
Core clock 1450@900mv memory clock 1100@900mv . /Hellae's powerplay table mod/
v7 - 8200 h/s @ 700 W at the wall.
v8 - 7800 h/s @ 800 W at the wall.

config_normalv8.txt
{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 55,
"shutdown_temperature" : 80,
"persistent_memory" : true,
/*"gpu_conf" :
[
   { "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 120, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 120, "worksize" : 16, "threads" : 2}
]*/
}

Check https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

logicus that is great result  

Please tell me, what cooling you have for rig, what is the temperature core and HBM of the cards, and RPM?

[Int3ll]

Hello @all, i have 2 rigs with 7x RX550 each ( Elpida 2GB RAM ) with Windows 10 and SRBMiner 1.6.8 on both.
One is using Adrenaline 18.7.1 and hashes 2.8K ( down from 3.4 K on v7 ) and one is using Adrenaline 18.5.1 and hashes 2.5K ( down from 3.2 ) but did not find any share for the past 4 hours.

Is there a problem with 18.5.1 on Win 10 and RX550?  

RIG 1 => 2.5k ( intensity 26, worksize 24, theads 2) ( RX550 with 8 Compute units )  using Adrenaline 18.5.1 but no shares are being found
RIG 2 => 2.8K ( intensity 26, worksize 24, theads 2) ( RX550 with 10 Compute units ) using Adrenaline 18.7.1

P.S. If i set the worksize to above 24 ( ex:26 or 32) it BSOD's instantly. Maybe i overclocked them to hard???   ( 1000 core and 1950 Memory, without GPU errors on HWinfo ) and worked great on v7.
Power limit is set to +20%, because i read a few pages back that v8 uses more power.

[Beoga]

Does this miner work with AMD Radeon R9 200 Series?
I have problem with:
......
Initializing OpenCL devices, please wait..

GPU0: AMD Radeon R9 200 Series [pitcairn] [2048 MB][Intensity 26.0][W: 16][T: 2]
[K: 1][BUS: 1]

---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.6.8
DevFee ~0.85%
Press 's' to get some stats
Press 'h' to get some hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2

Please wait...

CryptonightV8 mode enabled

[2018-10-20 21:20:31] Heating up system, please wait...
[2018-10-20 21:20:31] Compiling kernel for DEVICE BUS ID 1 ...
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different data layouts!
LLVM ERROR: Cannot select: 0x999d0d0: i32 = setcc 0x9997470, 0x5bdbb10, 0x99a2e2
0 [ORD=3092] [ID=246]
               .............

[logicus]

Thanks @logicus. I tried before to increase my HBM speed higher than 960MHz but it always give me BSOD. Is this because I didn't flashed my card with Vega 64 BIOS?

Yes, because cards have original bios.I flashed my card with Vega 64 BIOS.

what cooling you have for rig, what is the temperature core and HBM of the cards, and RPM?
Air cooling /open rig/ , 55 core temperature and 65 HBM temperature of the cards,  and vga fan - auto /~3500 RPM/

[dingdongtobias]

Does this miner work with AMD Radeon R9 200 Series?
I have problem with:
......
Initializing OpenCL devices, please wait..

GPU0: AMD Radeon R9 200 Series [pitcairn] [2048 MB][Intensity 26.0][W: 16][T: 2]
[K: 1][BUS: 1]

---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.6.8
DevFee ~0.85%
Press 's' to get some stats
Press 'h' to get some hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2

Please wait...

CryptonightV8 mode enabled

[2018-10-20 21:20:31] Heating up system, please wait...
[2018-10-20 21:20:31] Compiling kernel for DEVICE BUS ID 1 ...
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different data layouts!
LLVM ERROR: Cannot select: 0x999d0d0: i32 = setcc 0x9997470, 0x5bdbb10, 0x99a2e2
0 [ORD=3092] [ID=246]
               .............

[UnclWish]

Who can give best settings and binary for v8 on RX 580 8Gb? Using latest drivers... Wich binary file from binarykernels folder are best for RX 580?

[tvukoman]

what cooling you have for rig, what is the temperature core and HBM of the cards, and RPM?
Air cooling /open rig/ , 55 core temperature and 65 HBM temperature of the cards,  and vga fan - auto /~3500 RPM/

txs. That explain everything.

My rig are in small space, running hotter with 66 core temp. and over 77 HBM temp. For now i testing rig with lowering clocks and more mV.

Here is 2 Vega 56 and one Vega Strix 64. Strix is better cooled and work without problems:

GPU0 :    1877 H/s [T: 63c, RPM: 3577, CC: 1407 MHz, MC: 1050 MHz][BUS:3] - "more problematic Vega 56"
GPU3 :    1940 H/s [T: 66c, RPM: 3516, CC: 1407 MHz, MC: 1095 MHz][BUS:14] - "other Vega 56"
GPU2 :    2029 H/s [T: 56c, RPM: 3473, CC: 1442 MHz, MC: 1100 MHz][BUS:11] - Vega 64 Strix

[Lunga Chung]

RX580 Sapphire Nitro + (Samsung) 4gb

{
"cryptonight_type" : "normalv8",
"intensity" : 59,
"worksize" : 8,
"double_threads" : true
}

Wrosksize can 8 or 16 doesn't change much.

Best card 989 H/s, worst card 973 H/s

OC:

Core 1260
Voltage 900mV

Mem 2120
Voltage 900mV

[lupaarSen]

I have 5 vega56 Adrenalin 18.6.1
3 gfx 900 give by 1850 ~
2 gfx 901 give 1000 ~
what is the problem?

why my vega 901 give 1000 h/s
Vega 900 1800 h/s
How to raise hashrate on 901?

If you are using the binary kernels try to rename that folder and let the miner compile it again.

hi same here:
not working for me:
vega 901 give 1200
vega 900 give 1200
?

Same for me help plz (tip is to disable hbcc but it also low my hasrate when switching to other algos (haven,alloy...)


SRBMiner 1.6.8 AMD 18.6.1 Vega 56(stock-bios) Pulse (nano-PCb sapphire a f**** beast!) @ 1547 950

Cnv7:HBCC-on:2050H/s
Intensity 120 Worksize 8

Cnv8:HBCC-off:1950H/s
Cnv8:HBCC-on:1000-1200H/s
Intensity 120 Worksize 16

Solution please to keep HBCC on with normalv8 without a **** 1000H/s Vega 56!!!
What is the diffrence between gfx900 and gfx901 -> (900)vega 56 & (901)vega 64 ?!

[Bwtmn7]

I wonder why the CMD starts and as soon sets

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

------------------------------here it closes itself and makes a log file with the driver version, OS build
[2018-10-20 19:19:27] Video driver version: 24.20.11021.1000


@echo off
cd %~dp0

cls
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set LOGTIME=%dt:~0,4%_%dt:~4,2%_%dt:~6,2%_%dt:~8,2%_%dt:~10,2%_%dt:~12,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt


the v8 config looks like

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true
"gpu_conf" :
[
   {
     "id" : 0,
     "intensity" : 122,
     "worksize" : 8,
     "threads" : 1
   },
   {
     "id" : 0,
     "intensity" : 124,
     "worksize" : 8,
     "threads" : 1
   },
   {
     "id" : 1,
     "intensity" : 122,
     "worksize" : 8,
     "threads" : 1
   },
   {
     "id" : 1,
     "intensity" : 124,
     "worksize" : 8,
     "threads" : 1
   }
]
}

[Marvell2]

careful mining to crytopia , I lost all my earnings from support xmrs pool, and since they merge payments for all miners unlike other pools , you can’t eveb see how much you were paid per payout or what transaction Id your particular payouts were are part off im SOL

all this happened post fork,,Ive been mining this way for years, it seems the payment Ids are gettting lost
with the new fork