SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Bwtmn7]

well I got it working but the 2nd GPU is slower https://i.imgur.com/nBejBth.jpg also I notice there is a huge vdrop uses 90w then 150w I have this card undervolted but the problem seems to be the miner, and happens to the first card? but the 2nd which is slower doesnt get this vdrop

[1713581003]

1713581003

[1713581003]

1713581003

[1713581003]

1713581003

[carlosmonaco]

This is my setting:

RX580 Sapphire Nitro + (Samsung) 4gb

{
"cryptonight_type" : "normalv8",
"intensity" : 59,
"worksize" : 8,
"double_threads" : true
}

Wrosksize can 8 or 16 doesn't change much.

Best card 989 H/s, worst card 973 H/s

OC:

Core 1260
Voltage 900mV

Mem 2120
Voltage 900mV

Hello,
I have RX580 nitro+ 8 Go ( Micron memory and samsung ) , I'm running at 1150 core 2250 memory , stable but at 850h/s. What king of bios are u using ?

[abg00]

test rx570 8gb card with 1.6.9
rate and power save as 1.6.7
no trouble with low rate as on 1.6.8

[bojan_s]

Best intensity value for Sapphire RX580 8Gb Nitro SE Samsung mem, 1250/2050?
I am getting around 9500-1100 hs

You forgot to point algo.

haven

[Kgonla]

Cool!
With new version my RX 580 4GB give me about 10 H/s more & my 580 8GB about 15 more than with previous version.
Not tested fragments & bralock yet, so maybe it can improve a bit more.

[karim_hassan777]

where is the maxi version for lastest 1.6.9 ? or it will work at any condoition ?
and what does HBCC mean in this statement
" If you are using a Vega FE and want to mine V8, you MUST disable HBCC "

[Kgonla]

Cool!
With new version my RX 580 4GB give me about 10 H/s more & my 580 8GB about 15 more than with previous version.
Not tested fragments & bralock yet, so maybe it can improve a bit more.

Ups! My first test gave me +10 H/s with 4 gb card but now is very unstable reaching up to -90 H/s than before, tested changing intensity but no change.
The 8 gb is running fine.

[Lunga Chung]

Hello,
I have RX580 nitro+ 8 Go ( Micron memory and samsung ) , I'm running at 1150 core 2250 memory , stable but at 850h/s. What king of bios are u using ?

You can use SRB PBE pimp my straps

[dingdongtobias]

Cool!
With new version my RX 580 4GB give me about 10 H/s more & my 580 8GB about 15 more than with previous version.
Not tested fragments & bralock yet, so maybe it can improve a bit more.

Ups! My first test gave me +10 H/s with 4 gb card but now is very unstable reaching up to -90 H/s than before, tested changing intensity but no change.
The 8 gb is running fine.

write algo
write config

no mindreaders!

[vmozara]

Is it mandatory to use Adrenalin 18.6.1 or 5.1 as stated on the start page? I upgraded all my miners are 18.10.1 when it was released, and the thing works without any issues (vega 56 and 64). Are there some advantages in hashrate or power consumption on 6.1 or 5.1? I go to test 18.10.2 now 

[vmozara]

I have Vega 64 watercooled PC running 100% table and 1550 core and 1150 HBM2 - After installing newest driver my hashrate dropped by 15-20, from 2130 to 2115 but had a massive drop in power consumption. I am now remotely installing 18.10.2 driver on one vega rig to see the result. Maybe AMD blessed us all with new driver, maybe I did something wrong, wait until installation is finished, I am very excited now  

I screwed up, sorry guys. 7x vega 56 rig dropped about 100H/s with new driver, without change in consumption. 

[playfast]

Played with "fragments" setting, the default from compiled kernel was 4. Found 16 gives best hashrate for my rx560 2gb cards. Tiny ~4 H/s gain.
Will try to squeeze something from bralock soon, might take hours of testing

[camchimonline]

Hi everybody,
How to fix compute errors?
Thanks

[UnclWish]

Hi everybody,
How to fix compute errors?
Thanks

Lower overclocking, rise voltage if undervolted. Use native bios.

[Kgonla]

Cool!
With new version my RX 580 4GB give me about 10 H/s more & my 580 8GB about 15 more than with previous version.
Not tested fragments & bralock yet, so maybe it can improve a bit more.

Ups! My first test gave me +10 H/s with 4 gb card but now is very unstable reaching up to -90 H/s than before, tested changing intensity but no change.
The 8 gb is running fine.

write algo
write config

no mindreaders!

Sorry, you are right.

Here are my tests after 40-50 tries:

Drivers: Modified blockchain drivers for W7, not using precompiled kernels from 1.6.9
Algo: V8
Config at this time:
"gpu_conf" :
[
   { "id" : 0, "intensity" : 100, "worksize" : 8, "threads" : 2, "fragments" : 16, "bralock" : 50}, RX 580 8gb, connected to screen
   { "id" : 1, "intensity" : 61, "worksize" : 8, "threads" : 2, "fragments" : 16}, RX 580 4gb, with riser

V 1.6.8

Same actual, above config, without the fragments and bralocks
8gb card, very unstable, giving an average of about 935 H/s
4gb card, very stable, giving 1002-1005 H/s

V 1.6.9

8gb card, after playing with fragments & bralock I get 975 quite stable, with some peaks and valleys, this is about +40 H/s from 1.6.8

4gb card, here are the problems:
Rarely, I start program & have 1012-1015 H/s it is +10 H/s
Other times it start at about 950 H/s (+- 10 or 20 H/s, sometimes up to -40 H/s), after 2 to 6-8 minutes at some point the hash rate increases reaching above 1010 & stays there for the time I tested
Often, it starts about 950, like explained above but never goes higher than 960-965 H/s
I tested intensities from 50 to 62 & the same happens, also played with fragments, memory speed & bralock but no changes

Thank you.

[jazz1984]

Hi guys. Use srb 1_6_9 on my 7970 and have a less hashrate compared to 1_6_8. The problem is that the value of "fragments"  does not change, it is always 4. Heres my config.txt:
{
"cryptonight_type" : "normalv8",
"intensity" : 57,
"worksize" : 16,
"double_threads" : false,
"fragments" : 8
}


Where is my mistake? Thank you.

[Fanpant]

Hi guys. Use srb 1_6_9 on my 7970 and have a less hashrate compared to 1_6_8. The problem is that the value of "fragments"  does not change, it is always 4. Heres my config.txt:
{
"cryptonight_type" : "normalv8",
"intensity" : 57,
"worksize" : 16,
"double_threads" : false,
"fragments" : 8
}


Where is my mistake? Thank you.

What is your hash rate for the 7970? What is the clock speed?

[doktor83]

Hi guys. Use srb 1_6_9 on my 7970 and have a less hashrate compared to 1_6_8. The problem is that the value of "fragments"  does not change, it is always 4. Heres my config.txt:
{
"cryptonight_type" : "normalv8",
"intensity" : 57,
"worksize" : 16,
"double_threads" : false,
"fragments" : 8
}


Where is my mistake? Thank you.

You can't define fragments there.
Do it like this :

Code:

"gpu_conf" : 
[ 
	{ "id" : 0, "intensity" : 57, "worksize" : 16, "threads" : 2, "fragments" : 8}
]

[jazz1984]

Hi guys. Use srb 1_6_9 on my 7970 and have a less hashrate compared to 1_6_8. The problem is that the value of "fragments"  does not change, it is always 4. Heres my config.txt:
{
"cryptonight_type" : "normalv8",
"intensity" : 57,
"worksize" : 16,
"double_threads" : false,
"fragments" : 8
}


Where is my mistake? Thank you.

What is your hash rate for the 7970? What is the clock speed?

Last stable results on v8 was 470-475 H/s. Driver 18.6.1, win 7 x64, srbminer_1_6_8 intencity 57, worksize 16, no doublethreads. Clocks 1100 core / 1500 memory.

[jazz1984]

Hi guys. Use srb 1_6_9 on my 7970 and have a less hashrate compared to 1_6_8. The problem is that the value of "fragments"  does not change, it is always 4. Heres my config.txt:
{
"cryptonight_type" : "normalv8",
"intensity" : 57,
"worksize" : 16,
"double_threads" : false,
"fragments" : 8
}


Where is my mistake? Thank you.

You can't define fragments there.
Do it like this :

Code:

"gpu_conf" : 
[ 
	{ "id" : 0, "intensity" : 57, "worksize" : 16, "threads" : 2, "fragments" : 8}
]

Thank you, now it works. As i understand value of fragments can be equal only to this values:0,1,2,4,8,16,32,64,128 ?