SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[KhorneFlake]

I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed:

https://i.imgur.com/Sxk4zwu.png

Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again...

you need to cool those vegas, set the fan to 3000rpm.
That is why the hashrate drops, hbm gets too hot

Both are pretty much the same temps wise, maybe the upper one has a degree more.. Much better now since I switched to the Threadripper platform and there's more space between them, on the mainstream Ryzen mobo they were too close.

[1714052057]

1714052057

[1714052057]

1714052057

[1714052057]

1714052057

[1714052057]

1714052057

[1714052057]

1714052057

[BogdanCo]

I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed:



Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again...

you need to cool those vegas, set the fan to 3000rpm.
That is why the hashrate drops, hbm gets too hot

Both are pretty much the same temps wise, maybe the upper one has a degree more.. Much better now since I switched to the Threadripper platform and there's more space between them, on the mainstream Ryzen mobo they were too close.

Use Soft Power Play Tables to get Memory to 1100 Mhz if possible and also voltages a little down, you should get ~1900 H/s out of one Vega and temp around 50 degrees Celsius (depends of the Vega model). Keep in mind the HBM is ~10 degrees hotter than what you see on the screen.

[Gtx1070rig]

I got a rly weird problem...

3 of my 6 rx 580s have elpida mem...

randomly i got similar results

``[2018-10-31 19:18:12] GPU0 :    950 H/s [T: 56c, RPM: 1264, CC: 1200 MHz, MC: 2050 MHz][BUS:1]
[2018-10-31 19:18:12] GPU1 :    955 H/s [T: 61c, RPM: 1071, CC: 1200 MHz, MC: 2050 MHz][BUS:2]
[2018-10-31 19:18:12] GPU2 :    956 H/s [T: 56c, RPM: 1038, CC: 1200 MHz, MC: 2050 MHz][BUS:3]
[2018-10-31 19:18:12] GPU3 :    951 H/s [T: 55c, RPM: 1251, CC: 1200 MHz, MC: 2050 MHz][BUS:6]
[2018-10-31 19:18:12] GPU4 :    951 H/s [T: 57c, RPM: 1109, CC: 1200 MHz, MC: 2050 MHz][BUS:7]
[2018-10-31 19:18:12] GPU5 :    955 H/s [T: 56c, RPM: 1001, CC: 1200 MHz, MC: 2050 MHz][BUS:8]``

with little higher voltage on mem then on samsung mem cards...

But mostly i got these results with the same oc settings:

``[2018-11-01 18:00:48] GPU0 :    952 H/s [T: 60c, RPM: 1262, CC: 1200 MHz, MC: 2050 MHz][BUS:1]
[2018-11-01 18:00:48] GPU1 :    952 H/s [T: 63c, RPM: 1252, CC: 1200 MHz, MC: 2050 MHz][BUS:2]
[2018-11-01 18:00:48] GPU2 :    933 H/s [T: 70c, RPM: 999, CC: 1200 MHz, MC: 2050 MHz][BUS:4]
[2018-11-01 18:00:48] GPU3 :    953 H/s [T: 64c, RPM: 1137, CC: 1200 MHz, MC: 2050 MHz][BUS:5]
[2018-11-01 18:00:48] GPU4 :    931 H/s [T: 67c, RPM: 1142, CC: 1200 MHz, MC: 2050 MHz][BUS:6]
[2018-11-01 18:00:48] GPU5 :    932 H/s [T: 70c, RPM: 1256, CC: 1200 MHz, MC: 2050 MHz][BUS:7]
[2018-11-01 18:00:48] Total:    5640 H/s``

I flashed all with Bios One Time Click... The Samsung cards work great...
Anything i can do, do get similar results instead of losing around 20H/s (v8) per card?
or lost i the silicon lottery?^^

[KhorneFlake]

Yes, the HBM is hotter than the core, but still good regarding defaults I had on the mainstream platform, with HBM going over 90C...

http://gpuz.techpowerup.com/18/11/02/wm2.png

[Alcahest]

Hello !

I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8.
 
Here is my pools config :

{
"pools" :
[
   {
      "pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367",
      "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31",
      "password" : "x",
      "worker" : "D31"
   },
   {
      "pool" : "xmr-eu2.nanopool.org:14444",
      "wallet" : "42obT6dQSrC8YuP885n8mU6aHjcMzoFAyXqiSuB1JXmyUDYXTZSMfz5WbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm42dDYs6.D31",
      "password" : "x"
   }
]
}

My rig can't connect to my two pools, i have different errors : "connection to pool lost", "could not login user to pool, try again" or "cant' connect to xxx pool"
Here is a screenshot :

http://www.noelshack.com/2018-44-5-1541165408-srb.jpg

I have verified my firewall and antivirus configuration and all is OK...
Do you have any idea ?

Thank you for your help!

[tg88]

Hello !

I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8.
 
Here is my pools config :

Take a test with this syntax.

{
"pools" :
[
   
        {"pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"},
        {"pool" : "xmr-eu2.nanopool.org:14444", "wallet" : "42obT6dQSrC8YuP885n8mU6aHjcMzoFAyXqiSuB1JXmyUDYXTZSMfz5WbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm42dDYs6.D31", "password" : "x"}

]
}

[Alcahest]

Thank you for your help but also with your syntax it doesn't work

 

[logicus]

Hello !

I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8.
 

Try this pools config :

{
"pools" :
[
   {"pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"},
   {"pool" : "stratum+tcp://cryptonightv8.usa.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"},
   {"pool" : "stratum+tcp://cryptonightv8.jp.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"}
]
}

[solutions4w]

This one works for me:

{
"pools" :
[
   {"pool" : "cryptonightv8.eu.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true},
   {"pool" : "cryptonightv8.usa.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true},
   {"pool" : "cryptonightv8.jp.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true}
]
}

[Alcahest]

Thank you for your help but it doesn't work...
Do you think it could be a problem of firewall ?

[Bojcha]

Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...

ppt does not get memory to ~1100MHz.

[wgestickley]

Hi Doc,

I maybe found a Bug in latest Miner and Profit switching. In my config, I set in each the 5 min average hashrate for restart, but when Miner switch from a higher HR Algo (fast) to a slower one (maybe haben) it does not reset the values and restart the Miner with the text that average HR is lower than defined.

Can you please check it? After the Algo switch Miner should load the average HR value and reset the average numbers...

Oliver

[BogdanCo]

Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...

ppt does not get memory to ~1100MHz.

Then what gets memory to 1100Mhz?

[BS0D]

Hi Doc,

I maybe found a Bug in latest Miner and Profit switching. In my config, I set in each the 5 min average hashrate for restart, but when Miner switch from a higher HR Algo (fast) to a slower one (maybe haben) it does not reset the values and restart the Miner with the text that average HR is lower than defined.

Can you please check it? After the Algo switch Miner should load the average HR value and reset the average numbers...

Oliver

Had the same. Solves with  --resetmineronalgoswitch when running as admin.

[Bojcha]

Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...

ppt does not get memory to ~1100MHz.

Then what gets memory to 1100Mhz?

Flashing 64 bios.

[doktor83]

Hi Doc,

I maybe found a Bug in latest Miner and Profit switching. In my config, I set in each the 5 min average hashrate for restart, but when Miner switch from a higher HR Algo (fast) to a slower one (maybe haben) it does not reset the values and restart the Miner with the text that average HR is lower than defined.

Can you please check it? After the Algo switch Miner should load the average HR value and reset the average numbers...

Oliver

Going to check it out 

[BogdanCo]

Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...

ppt does not get memory to ~1100MHz.

Then what gets memory to 1100Mhz?

Flashing 64 bios.

lol. If you flash with 64 bios you will have the same 945 Mhz speed for the memory. And with PPT you can bring it up to 1100 Mhz.

[Markyz23]

Hello.

Anybody mining Mox here?

If anybody does, whats the best intensity setting for RX 570 4GB?

Currently i have it at 56, same as for normalv7 or v8 and stelite v4, but i think i can get more from the gpus.

Any suggestions?

[chup]

lol. If you flash with 64 bios you will have the same 945 Mhz speed for the memory. And with PPT you can bring it up to 1100 Mhz.

AFAIK without 64 bios flash there is no chance of PPT reaching voltages that support 1100 MHz.

[BogdanCo]

lol. If you flash with 64 bios you will have the same 945 Mhz speed for the memory. And with PPT you can bring it up to 1100 Mhz.

AFAIK without 64 bios flash there is no chance of PPT reaching voltages that support 1100 MHz.

Guys, I've build 4 rigs of Vega64 (each with 6-7 Vegas 64 on it) and with PPT all are hashing ~1900 h/s with the Memory at 1100 Mhz. Yes, maybe for Vega56 it's not possible, but we were talking about 2x Vega64 as you can see into the original posting: https://bitcointalk.org/index.php?topic=3167363.msg47168224#msg47168224