SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[rambetiko]

i have this error
Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 0 (Thread 0)

18.6.1
1.7.2

vega 64 hash 1790-1800 ok?

[1713433212]

1713433212

[1713433212]

1713433212

[1713433212]

1713433212

[Azzgard1980]

hi guys, please give good timings for micron,

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16-on these timings max 950 on heavy algo  rx578....
 

[zeef]

Hi doktor,

Notice that my system of 10 gpu is consuming more 5% power. Why consume differ  from  version 1.70 to 1.72 with same configs?   Changes in coding?

I have more 10% hashing too

Thanks

[NCarter84]

Anyone using 8gb cards for CN Lite V7? I can get over 1700hs... My 4gb cards are running upwards of 2000hs.

[GKumaran]

Hello Dok,

I am having strange issues with Vega 64 and the Heavy algos.

I have discovered the issue during testing and it seems like the Vega cards only hash at full potential immediately after they have been reset. If i run the benchmark again after running another algo, it drops down in hash.

First run after device reset:

Code:

Thread[0]: 0.0 H/s           <- RX580 8GB
Thread[1]: 0.0 H/s           <- RX580 8GB
Thread[2]: 1033.0 H/s      <- Vega 64
Thread[3]: 1046.0 H/s      <- Vega 64
Thread[4]: 973.0 H/s        <- Vega 64 low clock
Thread[5]: 980.0 H/s        <- Vega 64 low clock
Total:  4032.0 H/S
Thread[0]: 555.0 H/s       <- RX580 8GB
Thread[1]: 555.0 H/s       <- RX580 8GB
Thread[2]: 1041.0 H/s     <- Vega 64
Thread[3]: 1042.0 H/s     <- Vega 64
Thread[4]: 980.0 H/s       <- Vega 64 low clock
Thread[5]: 979.0 H/s       <- Vega 64 low clock
Total:  5152.0 H/S

Second run with no reset after running a Bittube bench:

Code:

Thread[0]: 0.0 H/s          <- RX580 8GB
Thread[1]: 0.0 H/s          <- RX580 8GB
Thread[2]: 1035.0 H/s     <- Vega 64
Thread[3]: 1027.0 H/s     <- Vega 64
Thread[4]: 973.0 H/s       <- Vega 64 low clock
Thread[5]: 970.0 H/s       <- Vega 64 low clock
Total:  4005.0 H/S
Thread[0]: 555.0 H/s      <- RX580 8GB
Thread[1]: 555.0 H/s      <- RX580 8GB
Thread[2]: 1032.0 H/s    <- Vega 64
Thread[3]: 1030.0 H/s    <- Vega 64
Thread[4]: 971.0 H/s      <- Vega 64 low clock
Thread[5]: 970.0 H/s      <- Vega 64 low clock
Total:  5113.0 H/S

It seems like no mater what algo change happens after the first run, the Heavy algos ca not reach maximum potential again till the Vega`s are reset. I have also tested "heavy_mode" : 1 and 2 but has no effect on the issue.

Can confirm this behaviour on even on CN v7 algos, but --resetvega fixes these
Just waiting for th CN lite code rewrites

[Anaykh]

Hello
I do not have any memory errors in HWinfo, but I get SRBMiner Compute error, can someone help me?
Widows: 10 x64 (1803)
Driver: 18.5.1
VGA: Asus ROG Strix RX480 8G Samsung Memory Patched UBERMIX 3.1.1
Thanks

[msTrix]

Hello
I do not have any memory errors in HWinfo, but I get SRBMiner Compute error, can someone help me?
Widows: 10 x64 (1803)
Driver: 18.5.1
VGA: Asus ROG Strix RX480 8G Samsung Memory Patched UBERMIX 3.1.1
Thanks

maybe some Core clock issues, drop it 25 Mhz or try raising power by 12mV

[abg00]

hi guys, please give good timings for micron,

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16-on these timings max 950 on heavy algo  rx578....
 

777000000000000022AA1C00EF615C41B0551016BA0D96060060060004061420EA8940AA030004C 01914292E692E3B16

[zeef]

Hi again doktor,

I use srbminer from months with no problem in my 9 vega 64 rig.

I use v1.6x - v1.7.0 weeks with no restart or hang.

But version 1.7.2, after 8 hours or so hangs.

In log i got this:

https://justpaste.it/4rctv

Any ideia what could be?

Regards

[Kgonla]

Hello
I do not have any memory errors in HWinfo, but I get SRBMiner Compute error, can someone help me?
Widows: 10 x64 (1803)
Driver: 18.5.1
VGA: Asus ROG Strix RX480 8G Samsung Memory Patched UBERMIX 3.1.1
Thanks

maybe some Core clock issues, drop it 25 Mhz or try raising power by 12mV

HWinfo do not show correctly memory errors, you can have a lot & HWinfo say there is no one.
Just set memory speed to lower value.

[doktor83]

Hi again doktor,

I use srbminer from months with no problem in my 9 vega 64 rig.

I use v1.6x - v1.7.0 weeks with no restart or hang.

But version 1.7.2, after 8 hours or so hangs.

In log i got this:

https://justpaste.it/4rctv

Any ideia what could be?

Regards

[2018-12-08 03:21:02] watchdog: GPU1 [BUS: 32] hashing speed is 0 H/S
[2018-12-08 03:21:13] watchdog: GPU1 [BUS: 32] hashing speed is 0 H/S
[2018-12-08 03:21:24] watchdog: GPU crash detected, miner will try to restart

[2018-12-08 03:50:02] Startup monitor detected that GPU's could not be initialised in 120 seconds

Looks like this gpu crashed so badly that even after miner restart it won't start , and it can't be initialised on miner startup.
Set a watchdog script to restart whole machine on crash, then on windows start set miner to start auto.

[camchimonline]

Hello
I do not have any memory errors in HWinfo, but I get SRBMiner Compute error, can someone help me?
Widows: 10 x64 (1803)
Driver: 18.5.1
VGA: Asus ROG Strix RX480 8G Samsung Memory Patched UBERMIX 3.1.1
Thanks

What is timing samsung ubernix 3.1.1?

[rambetiko]

i have this error
Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 0 (Thread 0)

18.6.1
1.7.2

vega 64 hash 1790-1800 ok?

please help this error. created one cache file "g1_XHV_w8_f1_hm1_ha.srb"

i use  2x rx580 + 4x vega 64

[korm]

hi guys, please give good timings for micron,

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16-on these timings max 950 on heavy algo  rx578....
 

777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715
 

[forceways]

777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715
 

Its Elpida timings good for micron ??

[livada]

Hi again doktor,

I use srbminer from months with no problem in my 9 vega 64 rig.

I use v1.6x - v1.7.0 weeks with no restart or hang.

But version 1.7.2, after 8 hours or so hangs.

In log i got this:

https://justpaste.it/4rctv

Any ideia what could be?

Regards

Hi Mate!

Please try my Vega64 settings: Algo: BittubeV2 (Bittube Coin)

Settings: { "id" : 0, "intensity" : 61, "worksize" : 9, "threads" : 2},

[2018-12-04 22:01:02] GPU0 :    2058 H/s [T: 31c, RPM: 2674, CC: 1408 MHz, MC: 1100 MHz][BUS:28]
[2018-12-04 22:01:02] GPU1 :    2062 H/s [T: 30c, RPM: 2507, CC: 1408 MHz, MC: 1100 MHz][BUS:19]
[2018-12-04 22:01:02] GPU2 :    2064 H/s [T: 30c, RPM: 2598, CC: 1408 MHz, MC: 1100 MHz][BUS:37]
[2018-12-04 22:01:02] GPU3 :    2058 H/s [T: 37c, RPM: 3687, CC: 1408 MHz, MC: 1100 MHz][BUS:34]
[2018-12-04 22:01:02] GPU4 :    2056 H/s [T: 38c, RPM: 3791, CC: 1408 MHz, MC: 1100 MHz][BUS:9]
[2018-12-04 22:01:02] GPU5 :    2061 H/s [T: 25c, RPM: 2574, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-12-04 22:01:02] GPU6 :    2057 H/s [T: 34c, RPM: 3693, CC: 1408 MHz, MC: 1100 MHz][BUS:31]
[2018-12-04 22:01:02] GPU7 :    2064 H/s [T: 32c, RPM: 2598, CC: 1408 MHz, MC: 1100 MHz][BUS:16]
[2018-12-04 22:01:02] GPU8 :    2055 H/s [T: 39c, RPM: 3707, CC: 1408 MHz, MC: 1100 MHz][BUS:25]
[2018-12-04 22:01:02] GPU9 :    2060 H/s [T: 33c, RPM: 2560, CC: 1408 MHz, MC: 1100 MHz][BUS:40]
[2018-12-04 22:01:02] GPU10:    2057 H/s [T: 32c, RPM: 2621, CC: 1408 MHz, MC: 1100 MHz][BUS:22]
[2018-12-04 22:01:02] GPU11:    2061 H/s [T: 27c, RPM: 2570, CC: 1408 MHz, MC: 1100 MHz][BUS:5]

maybe that helps, but maybe CHIP´s from your cards are to hot in about 8 hours? check that too for sure.

greetings
Patrick  

This is not true. Your setup and  HR is FAKE.  You not send any  SS for this. i have 3000HR (125W) with vega 56 on tube algo  you only 2050? your setup is bad

[2018-12-08 20:11:026] GPU0 :    3143 H/s [T: 21c, RPM: 2387, CC: 1380 MHz, MC: 1090 MHz][BUS:7]
Settings: { "id" : 0, "intensity" : 63, "worksize" : 8, "threads" : 2},

for all other gys. This is not true.

Vega 64 LE not have 3700 RPM(my have 3300RPM max) - all other card not have temp 30C
i have vega  64LE and this temp have only or NORTH POLE
normal TEMP for 64LE is 40C on 2000RPM

[evlo]

11 gpus are nitro+ rx570 8g samsung
1 gpu is xfx rx580 8g samsung
is this optimal config?
cnv8
[2018-12-08 11:56:20] GPU0 :    986 H/s [T: 62c, RPM: 1902, CC: 1300 MHz, MC: 2040 MHz][BUS:7]
[2018-12-08 11:56:20] GPU1 :    983 H/s [T: 57c, RPM: 1788, CC: 1300 MHz, MC: 2040 MHz][BUS:12]
[2018-12-08 11:56:20] GPU2 :    976 H/s [T: 59c, RPM: 1809, CC: 1300 MHz, MC: 1970 MHz][BUS:10]
[2018-12-08 11:56:20] GPU3 :    987 H/s [T: 57c, RPM: 1784, CC: 1300 MHz, MC: 2040 MHz][BUS:2]
[2018-12-08 11:56:20] GPU4 :    978 H/s [T: 61c, RPM: 1898, CC: 1300 MHz, MC: 1970 MHz][BUS:8]
[2018-12-08 11:56:20] GPU5 :    987 H/s [T: 54c, RPM: 1518, CC: 1300 MHz, MC: 2040 MHz][BUS:5]
[2018-12-08 11:56:20] GPU6 :    987 H/s [T: 58c, RPM: 1855, CC: 1300 MHz, MC: 2040 MHz][BUS:1]
[2018-12-08 11:56:20] GPU7 :    988 H/s [T: 60c, RPM: 1885, CC: 1300 MHz, MC: 2040 MHz][BUS:13]
[2018-12-08 11:56:20] GPU8 :    1024 H/s [T: 66c, RPM: 1707, CC: 1300 MHz, MC: 2040 MHz][BUS:4]
[2018-12-08 11:56:20] GPU9 :    987 H/s [T: 55c, RPM: 1780, CC: 1300 MHz, MC: 2040 MHz][BUS:3]
[2018-12-08 11:56:20] GPU10:    986 H/s [T: 55c, RPM: 1776, CC: 1300 MHz, MC: 2040 MHz][BUS:9]
[2018-12-08 11:56:20] GPU11:    978 H/s [T: 62c, RPM: 1852, CC: 1300 MHz, MC: 1970 MHz][BUS:11]
[2018-12-08 11:56:20] Total:    11847 H/s
~1600w for whole rig

finally now, when profitability is low, i'm starting sw benchmarks - i mine with each miner sw for 48h and check consumption and real hasheshes on pool. Obviously clean boot before every sw switch. But unfortunately nothing to publish, as with srb miner i noticed i run eth OC (1200mhz) instead of 1300mhz on most cards. I still don't know if 1300mhz is optimal for XMR performance/consumption wise.

I hope at least now, I can get reasonable replies from people with experience and no bullshit about 70w consumption of 570 card etc. like there were people claiming in January.

I guess I have this on all the cards (i extracted from two different and verified all cards are samsung K4G80325FB )
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19

voltages obviously lowest stable without some extreme trying for each mV.

SRBbios editor setting is:
777000000000000022CC1C00EF695D49D0571016360D460B0060870014051420FA8900A00300000 01B11333DB4303A17

[Lunga Chung]

11 gpus are nitro+ rx570 8g samsung
1 gpu is xfx rx580 8g samsung
is this optimal config?
cnv8
[2018-12-08 11:56:20] GPU0 :    986 H/s [T: 62c, RPM: 1902, CC: 1300 MHz, MC: 2040 MHz][BUS:7]
[2018-12-08 11:56:20] GPU1 :    983 H/s [T: 57c, RPM: 1788, CC: 1300 MHz, MC: 2040 MHz][BUS:12]
[2018-12-08 11:56:20] GPU2 :    976 H/s [T: 59c, RPM: 1809, CC: 1300 MHz, MC: 1970 MHz][BUS:10]
[2018-12-08 11:56:20] GPU3 :    987 H/s [T: 57c, RPM: 1784, CC: 1300 MHz, MC: 2040 MHz][BUS:2]
[2018-12-08 11:56:20] GPU4 :    978 H/s [T: 61c, RPM: 1898, CC: 1300 MHz, MC: 1970 MHz][BUS:8]
[2018-12-08 11:56:20] GPU5 :    987 H/s [T: 54c, RPM: 1518, CC: 1300 MHz, MC: 2040 MHz][BUS:5]
[2018-12-08 11:56:20] GPU6 :    987 H/s [T: 58c, RPM: 1855, CC: 1300 MHz, MC: 2040 MHz][BUS:1]
[2018-12-08 11:56:20] GPU7 :    988 H/s [T: 60c, RPM: 1885, CC: 1300 MHz, MC: 2040 MHz][BUS:13]
[2018-12-08 11:56:20] GPU8 :    1024 H/s [T: 66c, RPM: 1707, CC: 1300 MHz, MC: 2040 MHz][BUS:4]
[2018-12-08 11:56:20] GPU9 :    987 H/s [T: 55c, RPM: 1780, CC: 1300 MHz, MC: 2040 MHz][BUS:3]
[2018-12-08 11:56:20] GPU10:    986 H/s [T: 55c, RPM: 1776, CC: 1300 MHz, MC: 2040 MHz][BUS:9]
[2018-12-08 11:56:20] GPU11:    978 H/s [T: 62c, RPM: 1852, CC: 1300 MHz, MC: 1970 MHz][BUS:11]
[2018-12-08 11:56:20] Total:    11847 H/s
~1600w for whole rig

finally now, when profitability is low, i'm starting sw benchmarks - i mine with each miner sw for 48h and check consumption and real hasheshes on pool. Obviously clean boot before every sw switch. But unfortunately nothing to publish, as with srb miner i noticed i run eth OC (1200mhz) instead of 1300mhz on most cards. I still don't know if 1300mhz is optimal for XMR performance/consumption wise.

I hope at least now, I can get reasonable replies from people with experience and no bullshit about 70w consumption of 570 card etc. like there were people claiming in January.

I guess I have this on all the cards (i extracted from two different and verified all cards are samsung K4G80325FB )
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19

voltages obviously lowest stable without some extreme trying for each mV.

SRBbios editor setting is:
777000000000000022CC1C00EF695D49D0571016360D460B0060870014051420FA8900A00300000 01B11333DB4303A17

Mind sharing your config on SRB miner?

this card seems ok

[2018-12-08 11:56:20] GPU8 :    1024 H/s [T: 66c, RPM: 1707, CC: 1300 MHz, MC: 2040 MHz][BUS:4]

if its samsung you can go higher (v8 is a bit to memory intensive), try 2100

MY core is 1270 on 4gb nitro+ getting 1025 on all cards

[WhyMe]

Hi
Problem upgrading from 1.6.9 to 1.7.2 : impossible to get v8 working !
No problem under heavy or haven.
But v8 give me no share and lots of memory errors after few minutes.
Lowered intensity, core and memory, no effect.
T=1, T=2, W=8, W=16, ..., no change.
Moved from config file to full command line, no change.

Running this on 5 RX470 4G :
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 22,22,22,22,22 --cgputhreads 2,2,2,2,2 --cgpuworksize 16,16,16,16,16 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword test

Any idea ?


EDIT1 :
same on RX570 8G ... I'm probably missing something evident but I don't see


EDIT 2 :
this works on my test vega 56 :
SRBMiner-CN.exe --gpureorder --logfile log.txt --cgpuid 0 --ccryptonighttype normalv8 --cgpuintensity 72 --cgputhreads 2 --cgpuworksize 16 --cgputargettemperature 58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword test


EDIT 3 : more tests

5 RX 570 4G
core 1100,900mV
mem 1980,900mV
Drivers 18.9.2

Values are fixed low, for testing.

HEAVY
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype heavy --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool loki.miner.rocks:5555 --cwallet LA5QnQ5vBk8c8CQ1yN2GR7LhYMyCawDw3W22FHegHj5KEQtRfmiZQq9DRv62GLH48DaEWF8JatD3sKc 35CVFrrAE7LuNpg5.10000 --cpassword x


HAVEN
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype haven --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool ca.haven.miner.rocks:4005 --cwallet hvi1aCqoAZF19J8pijvqnrUkeAeP8Rvr4XyfDMGJcarhbL15KgYKM1hN7kiHMu3fer5k8JJ8YRLKCah DKFgLFgJMYAfnHoWFjtn1PPA2DN8V5.10000 --cpassword x


V8 (PYX)
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword x


V8 (GRAFT)
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pool.graft.community:3333 --cwallet GMPHYf5KRkcAyik7Jw9oHRfJtUdw2Kj5f4VTFJ25AaFVYxofetir8Cnh7S76Q854oMXzwaguL8p5KEz 1tm3rn1SA6qPuEmj3pWiQfAqMeJ --cpassword x


What's wrong ?

[ViWe]

Hello
I do not have any memory errors in HWinfo, but I get SRBMiner Compute error, can someone help me?
Widows: 10 x64 (1803)
Driver: 18.5.1
VGA: Asus ROG Strix RX480 8G Samsung Memory Patched UBERMIX 3.1.1
Thanks

What is timing samsung ubernix 3.1.1?

That's about memory straps, how the gpu handles it's memory, see e.g. https://forum.ethereum.org/discussion/13807/guide-tutorial-xmr-eth-how-to-mod-polaris-bios-amd-rx-470-570-480-580-mining
When your question is on the version number, I just know 3.1 not 3.1.1.