SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Kgonla]

Pool switch is not working for me. What is wrong here?:

{
"pools" :
[
   {"pool_use_tls" : false, "pool" : "pool.supportxmr.com:7777", "wallet" : "44Vg26iCszYfzVX1oyc6E4ifcyFgAh6QjgDsftaW8XER5XxkB7AS28jCq3tMqupREXf4YjHp6zhFhT", "password" : "V", "max_difficulty" :40000},
   {"pool_use_tls" : false, "pool" : "gulf.moneroocean.stream:10008", "wallet" : "44Vg26iCszYfzVX1oyc6E4ifcyFgAh6QjgDsftaW8XER5XxkB7AS28jCq3tMqupREXf4YjHpd", "password" : "V:8", "max_difficulty" :40000},
]
}

If i use only one pool it works fine but using two when I switch the miner does not connect.
(Note: Passwords & wallets shown are not real )

[twoxeons]

Different Wallets

[wgestickley]

Hey Guys,

do you habe experience in Profit Switch Strategy’s? What is the best timeframe to stick at a Ago before switching again?

[netian80]

Hi.
 
Thank you very much for your SRBminer.
 
At present, I have encountered the following problems. Is there any solution for that?
 
I have run each machine with the cmd line using each machine name (rig name) as '%COMPUTERNAME%'.
Now, to test the algorithm switching using the proxy, I have to configure it to the 'pools-algoswitch.txt' to start the algorithm switching.
I have not been able to use my computer name as the machine name, so I want to know a way to switch with the cmd command line and a way to automatically put my machine name in the configuration file.
 
Modifying all the configuration files will waste a lot of time for me.

[hin0001]

Report from me ...

Yes this is it the best miner today. V1.7.2 give me the highest hasrate on 470/480/570/580. Thanks doctor.

[big_daddy]

How much should i increase virtual memory for each vega 64 8gb red devil card?

Im using 8gb virtual memory for each vega.

Thanks

you have to double it
so, the virtual mem should be at least double GB per card

Example:
a rig with 2x gpu 4GB and 3x gpu 8GB -> the virtual mem should be at least 64 GB

[vydelek]

Verze 1.7.2 MEGA BEST !!!!

Test algo: Heavy

Asrock 570 8GB = 1156 H/s - 1200/2250 - 53C - 0.868 mV - 100W max.

VERY GOOD THANKS

[D8V1D]

Has anyone tried the new Adrenaline 2019 drivers?

[qwep1]

on new  driver  dont work

[Mashy81]

New drivers work on my vega and rx570 rigs with srbminer

[CircusDad]

Does anyone know the details of how the .85% fee is collected?  I looked through the logs and it was not clear to me.  If I keep restarting the miner during a tweaking period... is it the first period of time that it collects, what about when it auto restart the miner because it detects a GPU failure... does it meter it's collection based on that in any way?  I am sure there is a method (and it's OK for coders to get paid...), I just would like to know what it is.
Thanks.

[doktor83]

Does anyone know the details of how the .85% fee is collected?  I looked through the logs and it was not clear to me.  If I keep restarting the miner during a tweaking period... is it the first period of time that it collects, what about when it auto restart the miner because it detects a GPU failure... does it meter it's collection based on that in any way?  I am sure there is a method (and it's OK for coders to get paid...), I just would like to know what it is.
Thanks.

There is no fee mined in the first 5 minutes, so you can do the tweaking without paying every time the fee.
On gpu failure miner restart or user kill/close miner process and start again, the fee timer is restarted.

[maximus63]

Verze 1.7.2 MEGA BEST !!!!

Test algo: Heavy

Asrock 570 8GB = 1156 H/s - 1200/2250 - 53C - 0.868 mV - 100W max.

VERY GOOD THANKS

Nitro+ RX570 8gb JCE Miner 1200/2240 = 1200 H/s - 98w max

[big_daddy]

Verze 1.7.2 MEGA BEST !!!!

Test algo: Heavy

Asrock 570 8GB = 1156 H/s - 1200/2250 - 53C - 0.868 mV - 100W max.

VERY GOOD THANKS

Nitro+ RX570 8gb JCE Miner 1200/2240 = 1200 H/s - 98w max

What type of memory are your tested cards?

[maximus63]

Verze 1.7.2 MEGA BEST !!!!

Test algo: Heavy

Asrock 570 8GB = 1156 H/s - 1200/2250 - 53C - 0.868 mV - 100W max.

VERY GOOD THANKS

Nitro+ RX570 8gb JCE Miner 1200/2240 = 1200 H/s - 98w max

What type of memory are your tested cards?

Micron

[doktor83]

Verze 1.7.2 MEGA BEST !!!!

Test algo: Heavy

Asrock 570 8GB = 1156 H/s - 1200/2250 - 53C - 0.868 mV - 100W max.

VERY GOOD THANKS

Nitro+ RX570 8gb JCE Miner 1200/2240 = 1200 H/s - 98w max

What type of memory are your tested cards?

Micron

You are doing something bad, on 470 8g with mem straps and clocks for eth, not monero :
1200/2250 is overkill

[goodminer]

Hi, I downloaded your last version of miner and I can't start mining on fast algo with new adrenalin 18.12.2 drivers (driver is crushing), but can't anymore mining on 1.6.9 version of your miner, the same problem. I tried to input 6 amd ocl files (amd_opencl32, amd_opencl64, amdocl, amdocl12cl, amdocl12cl64, amdocl64) from recommended drivers 18.5.2 and 18.6.1 into both versions of your miner and I can't start mining...What can be the problem and what is solution??
I have radeon r7 370 card and the same problem is on 470 cards.
Thank you forward.

[Uaciuganadu]

Hey Dok,

Have you played around with the new Adrenalin 2019 drivers? Do you plan on supporting them and optimize SRB on them??

[P00P135]

Hey Dok,

Have you played around with the new Adrenalin 2019 drivers? Do you plan on supporting them and optimize SRB on them??

I wouldnt touch these until they have fleshed out more bugs.  It's a crash fest while trying to tweak multiple GPU's.

[a_tom]

My rig (6x470) rented on MRR by CN-fast algo.
I dont no what coin mined by renter, but...
On version 1.7.2 miner - all shares STALE
On version 1.6.9 - OK. 1-2% stale
Miner show pool diff 1000, thats all what I can see