SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[GKumaran]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	2627	215

[1713559013]

1713559013

[nordmann666]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	15765	215

-[/td][/tr][/table]

you should post your v8 hs and power consumption for comparison...or your oc settings

[swongsR1thing]

Has anyone tried 19.x.x drivers?
I plan to reinstall win10 and go with 19 drivers + 1.7.9 srbminer.

[akvilon888]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

[doktor83]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

[GKumaran]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	2627	215

you should post your v8 hs and power consumption for comparison...or your oc settings

Full post : https://bitcointalk.org/index.php?topic=3167363.msg49891145#msg49891145

[smen13]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.

[swongsR1thing]

Mining turtle coin is a nightmare with vega64 on win10 & srbminer. I cant get it to work.
Win build 1809
Drivers: 18.6.1
Config: 6x vega64, 4gb ram, celeron

I can only pray that these settings will hold for monero fork.

[doktor83]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.

They are not out they probably need lower intensity...

[doktor83]

Mining turtle coin is a nightmare with vega64 on win10 & srbminer. I cant get it to work.
Win build 1809
Drivers: 18.6.1
Config: 6x vega64, 4gb ram, celeron

I can only pray that these settings will hold for monero fork.

I know people are running srbminer & Vega64 without any nightmares. Crazy, right ? 

[swongsR1thing]

But how
I get
 "error cl_invalid_binary when calling clcreateprogramwithBinary [ctx - program] for DeviceID 0 (thread 0)
Error when doing initizalition stuff for GPUs"

Is this wrong path or what is this error?

[doktor83]

But how
I get
 "error cl_invalid_binary when calling clcreateprogramwithBinary [ctx - program] for DeviceID 0 (thread 0)
Error when doing initizalition stuff for GPUs"

Is this wrong path or what is this error?

maybe you have an onboard gpu that should be disabled

[Frianik]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

[doktor83]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

[doktor83]

Running RX 570s on v1.8.0 on the new Graft algo with same settings / OC as before crashes / reboots my miner.

Anyone know what has to be changed for new algo to run? Less OC?  More voltage? Or any other miner settings like intensity?

There is no before, as this is a new algorithm.
Try the auto setup for a start point

[AVP]

Running RX 570s on v1.8.0 on the new Graft algo with same settings / OC as before crashes / reboots my miner.

Anyone know what has to be changed for new algo to run? Less OC?  More voltage? Or any other miner settings like intensity?

There is no before, as this is a new algorithm.
Try the auto setup for a start point

Ok, makes sense. What does auto setup do exactly?

[Frianik]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

[doktor83]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

[doktor83]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

cpuid 0 = intel

remove word 'value' after --gpuintensity 😀

[Frianik]

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

https://i.ibb.co/bscxXcH/srb180.png
cpuid 0 = intel

remove word 'value' after --gpuintensity 😀

yeye i saw it after upload just played with all possibilities. btw it ask define nuber of threads after all and finally i start it from single bat

Code:

SRBMiner-CN.exe --gpureorder --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzz --cgpuid 1,2,3,4,5,6,7,8,9 --cgpuintensity 120,120,120,120,120,120,120,120,120 --cgputhreads 2,2,2,2,2,2,2,2,2 --logfile %LOGTIME% --apienable

upd. --cgpuid 1,2,3,4,5,6,7,8,9 is wrong define. right is --cgpuid 0,1,2,3,4,5,6,7,8 even if i use internal intel graphic which appears as gpu0 in regedit&overdriventool or 1 card is not workin