Bitcoin Forum
October 24, 2018, 06:20:53 AM *
News: Make sure you are not using versions of Bitcoin Core other than 0.17.0 [Torrent], 0.16.3, 0.15.2, or 0.14.3. More info.
 
   Home   Help Search Donate Login Register  
Pages: [1]
  Print  
Author Topic: My antminer s9 shows 0 Ghs mining suddenly, whats wrong  (Read 161 times)
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 25, 2018, 03:37:18 AM
 #1

I got a brand new antminer S9 and it works good but suddenly it stops hashing although the lights remain green and everything looks ok.

See here its showing 0.00 Ghs where in i see green lights at the miner and its connected to internet too.. What could be the reason? share your opinion please.

https://preview.ibb.co/eJaZLS/s9_ghs_issue.png



Moderator's note: This post was edited by frodocooper to remove inline image tags.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1540362053
Hero Member
*
Offline Offline

Posts: 1540362053

View Profile Personal Message (Offline)

Ignore
1540362053
Reply with quote  #2

1540362053
Report to moderator
1540362053
Hero Member
*
Offline Offline

Posts: 1540362053

View Profile Personal Message (Offline)

Ignore
1540362053
Reply with quote  #2

1540362053
Report to moderator
philipma1957
Legendary
*
Offline Offline

Activity: 2268
Merit: 1363


Avalon 841 rocks


View Profile
March 25, 2018, 05:32:37 PM
 #2

I got a brand new antminer S9 and it works good but suddenly it stops hashing although the lights remain green and everything looks ok.

See here its showing 0.00 Ghs where in i see green lights at the miner and its connected to internet too.. What could be the reason? share your opinion please.

...

trying to fix image first


https://i.imgur.com/vfSlxGj.png



Moderator's note: This post was edited by frodocooper to trim the quote from bitcoinexplorer and to remove inline image tags.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
BitMaxz
Legendary
*
Offline Offline

Activity: 1218
Merit: 1032

Bitmain miners is getting worst.


View Profile WWW
March 25, 2018, 10:11:00 PM
 #3

I hope that you can post the logs of your miner so that we can find what exactly happened with your miner.

Well, you must do software first and do basic ways to troubleshoot first if what exactly the reasons why your miner is not hashing properly.

Read the quoted below and do a hard reset.
It looks like your first hashing board is not running properly and maybe the hashing board gets too hot that leads to thermal protection so that the hashing board stopped.

Could you perform a factory reset?
Follow this method and maybe it can solve your issue.

  • First restart your miner then wait for 2 to 3 minutes
  • After powering on the miner for 3 minutes, press the reset button in your miner for 5 seconds then release
  • The miner will restart its own automatically for 5 minutes
  • Then monitor and check if the issue still persist

You can follow trouble shooting guide from bitmain if ever the issue not solve.
Check here https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-

I notice that your miners temp is high that exceeds almost 80 degrees this might be the reason why your hashing boards stop suddenly, can you do some cooling solution to decrease the temp of the miner so that the thermal protection couldn't trigger

philipma1957
Legendary
*
Offline Offline

Activity: 2268
Merit: 1363


Avalon 841 rocks


View Profile
March 26, 2018, 12:13:45 AM
 #4

my guess is a connection issue to the pool.

do you use wi fi?

do you have a long eth net wire?

like a 50 ft cat 5 wire?

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 08:20:58 AM
 #5

Thanks to all of you for trying to help

1. I tried the steps of reset but makes no difference.
2. Changed cables and not difference.
3. I know i need to arrange cooling but i suspect its not due to cooling.

Let me recap whats the issue.

1. I have few L3+, A3s, and these two S9, all of them are backedup by APC pure sinewave ups.

2. Things work perfectly fine but only issue happens when a electricity changeover to and from APC happens, i observed the miner noise gets down a bit when switchover happens and later the GHs are hashing at ZERO speed, although report says it is just not rebotted and session time is not reset.

3. Point to note is that when i poweroff and poweron the miner and it starts working fine for hours until the POWER SWITCH to and from APC ups happens, otherwise it cause no issue.

4. It is worth mentioning here that all other miners L3+ and A3s are on same APC UPS and they are working without issue on power switch, although in A3 i observed it restarts itself automatically and starts mining on a power switch. But L3s do not show such behaviour.

Now two reasons which i can understand are:-
1. Is it due to cooling? If so then why no issue when power switch does not happen?
2. Is this firmware issue as i see the linux version in S9s are latest

Kernel Version   Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
File System Version   Fri Nov 17 17:37:49 CST 2017
BMminer Version   2.0.0

Where on in A3s it is

Kernel Version   Linux 3.8.13 #22 SMP Tue Dec 2 15:26:11 CST 2014
File System Version   Fri Dec 29 17:12:57 CST 2017
CGminer Version   4.9.0

Its getting tricky hopefully some of you experts and put some light over it.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 11:34:54 AM
 #6

Below are the Kernel Logs

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000312] ps7-ttc #0 at df804000, irq=43
[    0.000619] Console: colour dummy device 80x30
[    0.000651] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040432] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040452] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042585] CPU: Testing write buffer coherency: ok
[    0.042918] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042977] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043203] L310 cache controller enabled
[    0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121040] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210380] SMP: Total of 2 processors activated.
[    0.210388] CPU: All CPU(s) started in SVC mode.
[    0.211052] devtmpfs: initialized
[    0.213467] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214673] regulator-dummy: no parameters
[    0.221921] NET: Registered protocol family 16
[    0.224211] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226496] cpuidle: using governor ladder
[    0.226510] cpuidle: using governor menu
[    0.233919] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235444] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235458] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235575] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257550] bio: create slab <bio-0> at 0
[    0.258955] vgaarb: loaded
[    0.259650] SCSI subsystem initialized
[    0.261033] usbcore: registered new interface driver usbfs
[    0.261350] usbcore: registered new interface driver hub
[    0.261577] usbcore: registered new device driver usb
[    0.262110] media: Linux media interface: v0.10
[    0.262268] Linux video capture interface: v2.00
[    0.262507] pps_core: LinuxPPS API ver. 1 registered
[    0.262519] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262642] PTP clock support registered
[    0.262996] EDAC MC: Ver: 3.0.0
[    0.264045] Advanced Linux Sound Architecture Driver Initialized.
[    0.266860] DMA-API: preallocated 4096 debug entries
[    0.266874] DMA-API: debugging enabled by kernel config
[    0.266949] Switched to clocksource arm_global_timer
[    0.287089] NET: Registered protocol family 2
[    0.287758] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287816] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287901] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287948] TCP: reno registered
[    0.287965] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287998] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288230] NET: Registered protocol family 1
[    0.288540] RPC: Registered named UNIX socket transport module.
[    0.288553] RPC: Registered udp transport module.
[    0.288561] RPC: Registered tcp transport module.
[    0.288570] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288582] PCI: CLS 0 bytes, default 64
[    0.289022] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291026] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293153] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293341] msgmni has been set to 967
[    0.294121] io scheduler noop registered
[    0.294134] io scheduler deadline registered
[    0.294172] io scheduler cfq registered (default)
[    0.306034] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306054] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429323] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.996569] console [ttyPS0] enabled
[    1.000842] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.008477] [drm] Initialized drm 1.1.0 20060810
[    1.025449] brd: module loaded
[    1.034832] loop: module loaded
[    1.044256] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.050202] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.058012] libphy: XEMACPS mii bus: probed
[    1.062384] ------------- phy_id = 0x3625e62
[    1.067460] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.082733] ehci-pci: EHCI PCI platform driver
[    1.089997] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.096792] usbcore: registered new interface driver usb-storage
[    1.103700] mousedev: PS/2 mouse device common for all mice
[    1.109863] i2c /dev entries driver
[    1.116764] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122282] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128210] Xilinx Zynq CpuIdle Driver started
[    1.133047] sdhci: Secure Digital Host Controller Interface driver
[    1.139168] sdhci: Copyright(c) Pierre Ossman
[    1.143480] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150370] mmc0: no vqmmc regulator found
[    1.154385] mmc0: no vmmc regulator found
[    1.196970] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205664] usbcore: registered new interface driver usbhid
[    1.211177] usbhid: USB HID core driver
[    1.215897] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222196] nand: Micron MT29F2G08ABAEAWP
[    1.226160] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232101] Bad block table found at page 131008, version 0x01
[    1.238328] Bad block table found at page 130944, version 0x01
[    1.244378] 3 ofpart partitions found on MTD device pl353-nand
[    1.250162] Creating 3 MTD partitions on "pl353-nand":
[    1.255250] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263300] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270624] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279562] TCP: cubic registered
[    1.282798] NET: Registered protocol family 17
[    1.287511] Registering SWP/SWPB emulation handler
[    1.293414] regulator-dummy: disabling
[    1.297762] UBI: attaching mtd1 to ubi0
[    1.822739] UBI: scanning is finished
[    1.834371] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.841451] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.848213] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.854877] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.861755] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.867736] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.874843] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1283732989
[    1.883886] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.893103] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.893108] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.897053] ALSA device list:
[    1.897057]   No soundcards found.
[    1.913466] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.942394] UBIFS: recovery needed
[    2.012100] UBIFS: recovery completed
[    2.015764] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.021713] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.030816] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.040705] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.045735] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[    2.057304] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.064700] devtmpfs: mounted
[    2.067830] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.903891] random: dd urandom read with 0 bits of entropy available
[    3.296965]
[    3.296965] bcm54xx_config_init
[    3.907019]
[    3.907019] bcm54xx_config_init
[    6.907827] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.913917] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.166629] In axi fpga driver!
[   19.169703] request_mem_region OK!
[   19.173093] AXI fpga dev virtual address is 0xdf9fc000
[   19.178236] *base_vir_addr = 0x8c510
[   19.193783] In fpga mem driver!
[   19.196918] request_mem_region OK!
[   19.200416] fpga mem virtual address is 0xe2000000
[   19.996379]
[   19.996379] bcm54xx_config_init
[   20.626349]
[   20.626349] bcm54xx_config_init
[   23.626867] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   23.632888] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  704.788313] random: nonblocking pool is initialized
[  808.452423]
[  808.452423] bcm54xx_config_init
[  811.452928] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[  811.458949] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8128c42e2420881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=3
Chain[5] ASIC[20] has core num=5
Chain[5] ASIC[23] has core num=15
Chain[5] ASIC[35] has core num=15
Chain[5] ASIC[40] has core num=15
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[8] has core num=15
Chain[6] ASIC[26] has core num=15
Chain[6] ASIC[32] has core num=1
Chain[6] ASIC[37] has core num=9
Chain[6] ASIC[52] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[6] has core num=2
Chain[7] ASIC[49] has core num=3
Chain[7] ASIC[59] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=24052 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8128c42e2420881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[5] speed=5880
get fan[2] speed=4560
get fan[5] speed=5880
get fan[2] speed=4560
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=3
Chain[J6] ASIC[20] has core num=5
Chain[J6] ASIC[23] has core num=15
Chain[J6] ASIC[35] has core num=15
Chain[J6] ASIC[40] has core num=15
Chain[J7] has core num in PIC
Chain[J7] ASIC[8] has core num=15
Chain[J7] ASIC[26] has core num=15
Chain[J7] ASIC[32] has core num=1
Chain[J7] ASIC[37] has core num=9
Chain[J7] ASIC[52] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[6] has core num=2
Chain[J8] ASIC[49] has core num=3
Chain[J8] ASIC[59] has core num=1
miner total rate=13908GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=687

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:668 Asic[16]:668
Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Detect a bad chip=23 on chain[5], fixed to 400M
Asic[23]:687 Asic[24]:668
Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 Asic[32]:668
Asic[33]:668 Asic[34]:668 Detect a bad chip=35 on chain[5], fixed to 400M
Asic[35]:687 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 Detect a bad chip=40 on chain[5], fixed to 400M
Asic[40]:687
Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:668
Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:5 max freq=687
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=675
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Detect a bad chip=8 on chain[6], fixed to 400M
Asic[ 8]:675
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Detect a bad chip=26 on chain[6], fixed to 400M
Asic[26]:675 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=675
Chain:6 min freq=656

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631

max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:43 remote:48 offset:26
Chain[J6] chip[244] get middle temp offset=26 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:42 remote:47 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:42 remote:46 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4553 voltage limit=890 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 890
single board rate=4554 voltage limit=890 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 890
single board rate=4528 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=909 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[20]=909
core[022]=7 core[053]=7 core[055]=7



freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=668
freq[16]=668 freq[17]=668 freq[18]=668 freq[19]=668 freq[20]=668 freq[21]=668 freq[22]=668 freq[23]=687
freq[24]=668 freq[25]=668 freq[26]=668 freq[27]=668 freq[28]=668 freq[29]=668 freq[30]=668 freq[31]=668
freq[32]=668 freq[33]=668 freq[34]=668 freq[35]=687 freq[36]=668 freq[37]=668 freq[38]=668 freq[39]=668
freq[40]=687 freq[41]=668 freq[42]=668 freq[43]=668 freq[44]=668 freq[45]=668 freq[46]=668 freq[47]=668
freq[48]=668 freq[49]=668 freq[50]=668 freq[51]=668 freq[52]=668 freq[53]=668 freq[54]=668 freq[55]=668
freq[56]=668 freq[57]=668 freq[58]=668 freq[59]=668 freq[60]=668 freq[61]=668 freq[62]=668

total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26827
last_nonce_num:28606
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=656 freq[01]=656 freq[02]=656 freq[03]=656 freq[04]=656 freq[05]=656 freq[06]=656 freq[07]=656
freq[08]=675 freq[09]=656 freq[10]=656 freq[11]=656 freq[12]=656 freq[13]=656 freq[14]=656 freq[15]=656
freq[16]=656 freq[17]=656 freq[18]=656 freq[19]=656 freq[20]=656 freq[21]=656 freq[22]=656 freq[23]=656
freq[24]=656 freq[25]=656 freq[26]=675 freq[27]=656 freq[28]=656 freq[29]=656 freq[30]=656 freq[31]=656
freq[32]=656 freq[33]=656 freq[34]=656 freq[35]=656 freq[36]=656 freq[37]=656 freq[38]=656 freq[39]=656
freq[40]=656 freq[41]=656 freq[42]=656 freq[43]=656 freq[44]=656 freq[45]=656 freq[46]=656 freq[47]=656
freq[48]=656 freq[49]=656 freq[50]=656 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26544
last_nonce_num:21484
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25870
last_nonce_num:28608
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=6317 total_tv_end_sys=6318
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=78.0470 Asic[02]=74.7920 Asic[03]=76.8730 Asic[04]=74.0880 Asic[05]=74.3230 Asic[06]=74.0370 Asic[07]=73.3330 Asic[08]=70.4130
Asic[09]=74.7420 Asic[10]=77.4600 Asic[11]=77.6610 Asic[12]=70.9500 Asic[13]=79.6410 Asic[14]=76.3360 Asic[15]=73.3160 Asic[16]=78.6680
Asic[17]=79.4060 Asic[18]=76.2350 Asic[19]=77.1910 Asic[20]=71.9570 Asic[21]=74.2550 Asic[22]=72.2420 Asic[23]=72.4440 Asic[24]=44.9460
Asic[25]=80.1440 Asic[26]=66.4540 Asic[27]=71.4030 Asic[28]=73.4500 Asic[29]=77.2750 Asic[30]=67.8470 Asic[31]=71.8730 Asic[32]=77.7280
Asic[33]=77.1750 Asic[34]=74.2220 Asic[35]=73.4000 Asic[36]=48.5190 Asic[37]=78.1980 Asic[38]=76.7050 Asic[39]=73.6010 Asic[40]=66.7060
Asic[41]=46.0700 Asic[42]=74.7420 Asic[43]=77.9460 Asic[44]=75.8660 Asic[45]=79.2720 Asic[46]=74.1380 Asic[47]=77.5100 Asic[48]=78.3490
Asic[49]=75.1450 Asic[50]=73.2820 Asic[51]=77.5100 Asic[52]=79.1710 Asic[53]=80.0440 Asic[54]=74.8260 Asic[55]=80.0270 Asic[56]=79.7750
Asic[57]=86.9730 Asic[58]=73.0640 Asic[59]=72.6450 Asic[60]=76.3690 Asic[61]=80.6640 Asic[62]=77.0070 Asic[63]=79.3220

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=75.7490 Asic[02]=74.3060 Asic[03]=75.9000 Asic[04]=81.3190 Asic[05]=70.4300 Asic[06]=75.1950 Asic[07]=77.5440 Asic[08]=73.1650
Asic[09]=49.0390 Asic[10]=71.1180 Asic[11]=73.4500 Asic[12]=70.2960 Asic[13]=77.9970 Asic[14]=79.9930 Asic[15]=75.7490 Asic[16]=71.9740
Asic[17]=76.5040 Asic[18]=79.7250 Asic[19]=70.1620 Asic[20]=72.3600 Asic[21]=75.0780 Asic[22]=80.3790 Asic[23]=75.1450 Asic[24]=75.2290
Asic[25]=75.8490 Asic[26]=73.9870 Asic[27]=43.3520 Asic[28]=75.7490 Asic[29]=72.0910 Asic[30]=71.4870 Asic[31]=81.9730 Asic[32]=80.6140
Asic[33]=76.1510 Asic[34]=79.4560 Asic[35]=73.3660 Asic[36]=74.1550 Asic[37]=73.3660 Asic[38]=70.1450 Asic[39]=74.0210 Asic[40]=77.5770
Asic[41]=71.7560 Asic[42]=83.0630 Asic[43]=79.6070 Asic[44]=77.7280 Asic[45]=72.6950 Asic[46]=73.7350 Asic[47]=80.8320 Asic[48]=82.3250
Asic[49]=73.7020 Asic[50]=71.6050 Asic[51]=77.0910 Asic[52]=74.5410 Asic[53]=75.2290 Asic[54]=81.0500 Asic[55]=77.2920 Asic[56]=76.7550
Asic[57]=84.1710 Asic[58]=76.1510 Asic[59]=79.0030 Asic[60]=71.7050 Asic[61]=77.4260 Asic[62]=77.1580 Asic[63]=69.6920

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=72.9800 Asic[02]=73.5510 Asic[03]=72.0410 Asic[04]=77.6110 Asic[05]=77.7120 Asic[06]=78.2650 Asic[07]=73.8360 Asic[08]=71.1680
Asic[09]=66.7900 Asic[10]=67.8130 Asic[11]=74.1880 Asic[12]=73.3330 Asic[13]=67.9470 Asic[14]=71.6380 Asic[15]=71.2190 Asic[16]=72.1580
Asic[17]=70.3800 Asic[18]=68.4510 Asic[19]=70.2120 Asic[20]=71.8230 Asic[21]=74.4230 Asic[22]=74.9270 Asic[23]=72.5950 Asic[24]=69.6590
Asic[25]=71.2360 Asic[26]=68.7020 Asic[27]=73.5170 Asic[28]=70.7150 Asic[29]=68.9040 Asic[30]=64.5580 Asic[31]=75.9160 Asic[32]=73.5000
Asic[33]=71.6210 Asic[34]=68.2160 Asic[35]=74.3060 Asic[36]=69.4740 Asic[37]=73.1650 Asic[38]=70.7490 Asic[39]=64.8600 Asic[40]=70.0280
Asic[41]=61.7230 Asic[42]=69.2060 Asic[43]=70.9500 Asic[44]=67.0580 Asic[45]=74.3560 Asic[46]=67.4940 Asic[47]=72.8970 Asic[48]=71.9070
Asic[49]=74.2550 Asic[50]=71.8730 Asic[51]=72.7460 Asic[52]=68.9710 Asic[53]=67.4270 Asic[54]=70.4130 Asic[55]=69.3900 Asic[56]=77.4260
Asic[57]=70.7150 Asic[58]=76.8560 Asic[59]=73.0980 Asic[60]=66.3870 Asic[61]=69.3060 Asic[62]=70.9340 Asic[63]=71.8230
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=26
Chain[5] Chip[62] local Temp=75
Chain[5] Chip[62] middle Temp=85
Special fix Chain[5] Chip[62] middle Temp = 90
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
Chain[6] Chip[62] local Temp=71
Chain[6] Chip[62] middle Temp=82
Special fix Chain[6] Chip[62] middle Temp = 86
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=72
Chain[7] Chip[62] middle Temp=82
Special fix Chain[7] Chip[62] middle Temp = 87
Done read temp on Chain[7]
set FAN speed according to: temp_highest=75 temp_top1[PWM_T]=75 temp_top1[TEMP_POS_LOCAL]=75 temp_change=1 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
Biffa
Legendary
*
Offline Offline

Activity: 1666
Merit: 1009



View Profile
March 26, 2018, 11:59:47 AM
 #7

Why is your power switching on the UPS so often?

Could be the UPS isn't providing enough juice for all the miners, you could try:
a) getting a second UPS
b) moving some of the other miners off the UPS temporarily
c) just shut down the L3+ and A3 miners and test the power switching scenario on the UPS with just the S9's connected.

Mine at pools that pay transaction fees & don't mine empty blocks :: kanopool :: ckpool ::
:: Dalcore's Crypto Mining H/W Hosting Directory & Reputation ::
philipma1957
Legendary
*
Offline Offline

Activity: 2268
Merit: 1363


Avalon 841 rocks


View Profile
March 26, 2018, 12:11:56 PM
 #8

UPS  providing

 1400 ---------s9
 1400  --------s9
    800 --------L3
    800 --------L3
    900 --------A3

5300 watts

please list the ups  make and model

and please  correct  my  watt estimate if you have more gear then I listed

lastly  what are each psu for each miner.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 12:37:55 PM
 #9

Why is your power switching on the UPS so often?

Could be the UPS isn't providing enough juice for all the miners, you could try:
a) getting a second UPS
b) moving some of the other miners off the UPS temporarily
c) just shut down the L3+ and A3 miners and test the power switching scenario on the UPS with just the S9's connected.
Already tried putting only 1 S9 alone on that giant but still the same issue.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 12:41:04 PM
 #10

UPS  providing

 1400 ---------s9
 1400  --------s9
    800 --------L3
    800 --------L3
    900 --------A3

5300 watts

please list the ups  make and model

and please  correct  my  watt estimate if you have more gear then I listed

lastly  what are each psu for each miner.
I am using APC XL heavy duty ups
i am using APW3++ Bitmain official power supply
Biffa
Legendary
*
Offline Offline

Activity: 1666
Merit: 1009



View Profile
March 26, 2018, 12:53:59 PM
 #11

I am using APC XL heavy duty ups
i am using APW3++ Bitmain official power supply

AFAIK APC Smart-UPS XL only comes in 1500VA or 3000VA neither of which would be enough to run the 2 S9's on their own let alone with the other kit on there as well. The APC Smart-UPS XL Modular 3000VA only provides 2500W.



Moderator's note: This post was edited by frodocooper to remove a nested quote.

Mine at pools that pay transaction fees & don't mine empty blocks :: kanopool :: ckpool ::
:: Dalcore's Crypto Mining H/W Hosting Directory & Reputation ::
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 01:22:03 PM
 #12

AFAIK APC Smart-UPS XL only comes in 1500VA or 3000VA neither of which would be enough to run the 2 S9's on their own let alone with the other kit on there as well. The APC Smart-UPS XL Modular 3000VA only provides 2500W.

I am using APC 5 KVA XL, its a European model and i am using it to power 2 S9 and to other miners as explained making a total of 4, this can easily support upto 5000 watts although officially APC claims 4000 watt.

Even otherwise i switched off all machines and tried running single S9 and same issue.



Moderator's note: This post was edited by frodocooper to remove multiple nested quotes.
Biffa
Legendary
*
Offline Offline

Activity: 1666
Merit: 1009



View Profile
March 26, 2018, 02:08:53 PM
 #13

I am using APC 5 KVA XL, its a European model and i am using it to power 2 S9 and to other miners as explained making a total of 4, this can easily support upto 5000 watts although officially APC claims 4000 watt.

Even otherwise i switched off all machines and tried running single S9 and same issue.

OK if you switched off the other machines and just ran a single S9 and still had the problem then its probably something to do with the S9 that doesn't like the power switching. Could be all S9's thing is most people probably haven't experienced the problem you are running into as most people don't run miners on UPS' because, well, its hard enough trying to get a return on your investment on the miners alone without having to get it on a EUR 1600 UPS as well Smiley

I still wonder why you are noticing it so much, do you have many power outages in your location?



Moderator's note: This post was edited by frodocooper to remove multiple nested quotes.

Mine at pools that pay transaction fees & don't mine empty blocks :: kanopool :: ckpool ::
:: Dalcore's Crypto Mining H/W Hosting Directory & Reputation ::
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 02:34:02 PM
 #14

OK if you switched off the other machines and just ran a single S9 and still had the problem then its probably something to do with the S9 that doesn't like the power switching. Could be all S9's thing is most people probably haven't experienced the problem you are running into as most people don't run miners on UPS' because, well, its hard enough trying to get a return on your investment on the miners alone without having to get it on a EUR 1600 UPS as well Smiley

I still wonder why you are noticing it so much, do you have many power outages in your location?

Yes thats why i have UPS



Moderator's note: This post was edited by frodocooper to remove multiple nested quotes.
philipma1957
Legendary
*
Offline Offline

Activity: 2268
Merit: 1363


Avalon 841 rocks


View Profile
March 26, 2018, 06:58:52 PM
 #15

I am using APC XL heavy duty ups
i am using APW3++ Bitmain official power supply

your answer lacks info.

but this is a ballsy mofo below

https://www.amazon.com/APC-SURT10000XLT-4-Outlet-Hardline-Uninterruptible/dp/B0002MKC2W/ref=sr_1_5?


is this yours?

https://www.schneider-electric.com/en/product/SURT10000XLT_APC/apc-smart-ups-rt-10000va-208v/

it provides 208 volts  and   your psu  at 208 volts  lack enough juice to run the s-9

208/220 x 1600 = 1512 watts  max  

maybe

208/240 x 1600 =  1386 watts max


so  if you want  to run s-9's  with a 208 volt ups  you may need this psu


https://www.ebay.com/itm/2450W-Power-Supply-for-bitmain-antminer-T9-S9-L3-S7-200V-240V-PSU-US-SHIP/253365274715?



Moderator's note: This post was edited by frodocooper to remove a nested quote.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
March 26, 2018, 07:21:54 PM
 #16

your answer lacks info.

[...]

Thanks for your response.

I will find out exact model of ups for you. But i have a question that how come its running fine on UPS on or after switch over after i click "Save configuration" while its on SAME unassumingly 208 volt ? How come it run then?

Let me again point out issue is on SWITCH OVER to and from APC. And while its shifted entirely to APC when i click "Save Configuration" in S9 config it just restart itself and start hashing on the same supposedly 208 volt.

How would you explain that?



Moderator's note: This post was edited by frodocooper to trim the quote from philipma1957.
philipma1957
Legendary
*
Offline Offline

Activity: 2268
Merit: 1363


Avalon 841 rocks


View Profile
March 26, 2018, 09:52:52 PM
 #17

Thanks for your response.

I will find out exact model of ups for you. But i have a question that how come its running fine on UPS on or after switch over after i click "Save configuration" while its on SAME unassumingly 208 volt ? How come it run then?

Let me again point out issue is on SWITCH OVER to and from APC. And while its shifted entirely to APC when i click "Save Configuration" in S9 config it just restart itself and start hashing on the same supposedly 208 volt.

How would you explain that?

The onset surge is too high.   An easy way to see if I am right attach 2 boards and the controller one 1 s-9  the psu will not have an onset surge as big.

an l3 and an a3 both come no where  close to 1400 watts

the s-9  does

but a 2 board s-9 will work if I am right

btw  if I am wrong I have zero clue on what to do for you

and it will work



Moderator's note: This post was edited by frodocooper to remove multiple nested quotes.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
Pages: [1]
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!