sgminer: Baikal Giant X10 / N / B - Open Source - Confirmed OC Giant B!

[drogasi]

  
thanks for the answer, I've read now this thread, in the crypto world scammer are everywere

[1713575073]

1713575073

[1713575073]

1713575073

[1713575073]

1713575073

[1713575073]

1713575073

[1713575073]

1713575073

[AleRos]

Hi guys,
I wanted to point out that, after completing the overclocking procedure and setting "400" as value,
I have been testing the mining on the pascal algorithm for about a week.
The result is the same as that obtained without overclocking,
so I communicate that overclocking does not work for Pascal

cod3gen, but have you tested the various hashrates of the various algorithms?

can you show us your results?

AleRos

[Big World]

interested.  thread reserved, I got 2 B running in my garage .

[cod3gen]

Hi guys,
I wanted to point out that, after completing the overclocking procedure and setting "400" as value,
I have been testing the mining on the pascal algorithm for about a week.
The result is the same as that obtained without overclocking,
so I communicate that overclocking does not work for Pascal

cod3gen, but have you tested the various hashrates of the various algorithms?

can you show us your results?

AleRos

No, none Giant B algo`s have been tested by me, i dont own any B`s. Is`nt 400mhz stock on Giant B`s?

[BlaCKBloOD]

Baikal Giant B after overclocking.

https://image.ibb.co/k4s6Uy/Baikal_B_OC.jpg
Default hashrate was 42 Gh.
Baikal-fan=30

Many thanks to cod3gen.

[cod3gen]

@BlaCKBloOD how about pool side results? Are there increased hashrate there?

[BlaCKBloOD]

@BlaCKBloOD how about pool side results? Are there increased hashrate there?

Too many factors there. Pool luck etc., I will see later. We need someone with 2 Baikals Giant B. One OC and another not.

[cod3gen]

@BlaCKBloOD how about pool side results? Are there increased hashrate there?

Too many factors there. Pool luck etc., I will see later. We need someone with 2 Baikals Giant B. One OC and another not.

Luck does not affect reported hashrate on pool, that affects your earnings :-)

[dez82]

Just to clarify,

If I update my Giant N with this, I will get no overclock and no new algo's?

Good on cod3gen for open sourcing the firmware and STM for the miner, but I just can't tell if there's any actual benefit on the dogsh!t that is my GIant N miner.

Sorry if I sound ignorant, but I'm a miner, not a programmer and if I use this update, it's going to take me about 2 hours of pissing about, so I want to make sure I'm actually chasing something I'll benefit from.

From reading the thread, it looks like the B and X10 are the only ones which actually benefit in a real change.

Hoping someone can clarify.

[BlaCKBloOD]

@BlaCKBloOD how about pool side results? Are there increased hashrate there?

Too many factors there. Pool luck etc., I will see later. We need someone with 2 Baikals Giant B. One OC and another not.

Luck does not affect reported hashrate on pool, that affects your earnings :-)

Hashrate is still going up and down. I am on CoinMine.pl

https://image.ibb.co/b7CosJ/Coinmine_Hashrate.jpg
https://image.ibb.co/mYehmd/Hash1.jpg
https://image.ibb.co/cXfNmd/Hash2.jpg
Is going UP or not ? By me YES !!! Overclocked !!!  

https://image.ibb.co/muopzy/Hash3.jpg
Before 42Gh, now 47Gh and going UP.

[cod3gen]

Is going UP or not ? By me YES !!! Overclocked !!! 

Before 42Gh, now 47Gh and going UP.

Nice, so you got OC working! :-)

Just to clarify,

If I update my Giant N with this, I will get no overclock and no new algo's?

Good on cod3gen for open sourcing the firmware and STM for the miner, but I just can't tell if there's any actual benefit on the dogsh!t that is my GIant N miner.

Sorry if I sound ignorant, but I'm a miner, not a programmer and if I use this update, it's going to take me about 2 hours of pissing about, so I want to make sure I'm actually chasing something I'll benefit from.

From reading the thread, it looks like the B and X10 are the only ones which actually benefit in a real change.

Hoping someone can clarify.

The only miner that benefit from this is Giant B. It works with Giant N and Giant X10, but it does not provide any OC or new algo`s to either one of those.

[Bob-Bit]

So is X13 one of the new available algorithms? That's the only one I'm interested in. I tried reading back 3 or 4 pages, but I'm not seeing if it's included. Thanks for your hard work, this looks awesome! I love the interface of the Baikal miners. They work great as a compliment to Awesome miner. (Which I use) Again, thank you!

[cod3gen]

So is X13 one of the new available algorithms? That's the only one I'm interested in. I tried reading back 3 or 4 pages, but I'm not seeing if it's included. Thanks for your hard work, this looks awesome! I love the interface of the Baikal miners. They work great as a compliment to Awesome miner. (Which I use) Again, thank you!

None of B/N/X10 is capable of X13 algo.

[Big World]

So is X13 one of the new available algorithms? That's the only one I'm interested in. I tried reading back 3 or 4 pages, but I'm not seeing if it's included. Thanks for your hard work, this looks awesome! I love the interface of the Baikal miners. They work great as a compliment to Awesome miner. (Which I use) Again, thank you!

BAIKAL A2000 include X13 algorithm 

[goga5]

Greetings to all! Two Baikal "B", one in the dispersal of another is not. when testing during the day, the income is identical. returned everything back ... I tested it with "nicehash", as on one in the pool (Lbry), the hashtet periodically jumped to 50 GH/s, and also jumped on the other "B".

[goodmancz]

Hello!!
I tested cod3gen moded sgminer, now on BAIKAL B is all working, but is it possible to push more frequency than 480Mhz i tried compile with driver-baikal.h line 18,25 (500) (520), but always was on 480Mhz..
BTW thanks to cod3gen!!!    

[BlaCKBloOD]

And For Baikal X10 We have any news for make a Overclock or for implement new ago Those miners have a FPGA chips...

Baikal X10 and Baikal B is not the same ? Somebody saw chips ? Somebody try to change SDCard viceversa between Baikal B and X ?

[Bob-Bit]

So is X13 one of the new available algorithms? That's the only one I'm interested in. I tried reading back 3 or 4 pages, but I'm not seeing if it's included. Thanks for your hard work, this looks awesome! I love the interface of the Baikal miners. They work great as a compliment to Awesome miner. (Which I use) Again, thank you!

BAIKAL A2000 include X13 algorithm 

Eh. Yeah, I already have that one and the A900's. X10's mining X13 would be awesome though if someone were to crack that egg, I'd be all over that. Well, I guess the positive side to this is that there are no new X13 miners making the ones still out there more valuable. If someone does figure out how to use X10s for mining X13 algo I definitely want to stay abreast of that situation though, which is why I asked. It would seem doable since the X10 does a few algos in common with the Giant+ etc. I'll be watching here with interest.

[oricon]

hello cod3gen

I bought bk-n240

Browse
https://github.com/cod3gen/sgminer-baikal
Follow the steps written on the website to rebuild

use root

sudo apt-get install git
git clone https://github.com/cod3gen/sgminer-baikal.git
cd sgminer-baikal
autoreconf -fi && ./configure && make
cp /opt/scripta/bin/sgminer /opt/scripta/bin/sgminer_ORG
cp sgminer /opt/scripta/bin/sgminer


When executing sgminer

The message that appears is

Started sgminer 5.6.2-BK_cod3gen_MOD
* using Jansson 2.7
No devices detected!
Waiting for USB hotplug devices or press q to quit

Is my step missing

[elmond]

How to install and compile?
use SSH and log in as root user to your miner, default password is baikal.
cd ~
sudo apt-get install git
git clone https://github.com/cod3gen/sgminer-baikal.git
cd sgminer-baikal
nano driver-baikal.h DO CHANGES AS ABOVE. If you have Giant N, no need to do changes.
autoreconf -fi && ./configure && make
cp /opt/scripta/bin/sgminer /opt/scripta/bin/sgminer_ORG
This process will take about 15min.

When its done you need to:

screen -x sgminer
ctrl+c to stop screen session
cp sgminer /opt/scripta/bin/sgminer Confirm overwrite. If you cannot overwrite, you need to stop screen session again and retry copy.
After a while you can reconnect to screen session(screen -x sgminer). When you do not need to see screen session any more, use ctrl+a+d keys to dettach!

do you done step above with bold blue color?