[ANN] Ravencoin [RVN] PoW GPU Mining | Asset Transfer Blockchain (Updated ANN)

[GaryH]

BTW,
Running Enemy 1.08 for a couple of days now. I've got 27 GPUs/miners but I had to take one out yesterday. This makes comparing average hash rates harder, but.... My average 24 hour hash rate is up 5% (even without the dead miner). I think (which doesn't happen much) that the worker was about 4% of my hash rate. So my bad math says Enemy 1.08 is 9% faster than 1.05a for the past 24 hours. (I know my logic is flawed, but 1.08 is faster - at least 5%, maybe a little more).

yeap I'm seeing the same thing.  

[1713558304]

1713558304

[1713558304]

1713558304

[1713558304]

1713558304

[1713558304]

1713558304

[1713558304]

1713558304

[Nexillus]

Anyone do a bench yet between the miners?
Z-Enemy 1.08 vs Silent Miner v1.0.9 vs Nevermore 2.2

[hummer113]

guys tell me which pool it is best now to mine crows ? at the bsod I honestly don't like it, what else can I try ?

[rene98c]

guys tell me which pool it is best now to mine crows ? at the bsod I honestly don't like it, what else can I try ?

Pick one close to you with a good latency.
I personally prefer smaller to medium size pools, small ones prefer too much on luck, but whatever you prefer.
In the long run it supposed to smooth out regardless of the pool size.

You checked the pool list in the thread post?
You can also get list of pools on Ravencoin Community discord https://discord.gg/7br8bv2
at #bot-spam type in !pools and it gives you the current list there.

[WickedPigeon]

guys tell me which pool it is best now to mine crows ? at the bsod I honestly don't like it, what else can I try ?

If you like large:
~Ravencoin or Suprnova - but I don't like large
If you like medium
~Yiimp,
~Panda,
~Cryptoparty (seems to all the buz right now)
But i prefer smaller, but not micro (>10GH)
~Pickaxe,
~Virtopia, (that's were I'm at now)
~Minepool

Most of the pools with any hashrate >10GH will be fine - I'm getting 1 1/2 to 2 times the calculated payout right now - so I'm digging at Virtopia.

[ganzocrypt]

Hello, new optimized sgminer, based on avermore:  https://github.com/KL0nLutiy/sgminer-gm-x16r/releases

cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue:
I am on Windows 10

[18:38:33] CL Platform vendor: Intel(R) Corporation
[18:38:33] CL Platform name: Intel(R) OpenCL
[18:38:33] CL Platform version: OpenCL 2.0
[18:38:33] Error -1: Getting Device IDs (num)
[18:38:33] clDevicesNum returned error, no GPUs usable
[18:38:33] 0 GPU devices max detected

[daem0n]

Silent Miner v1.0.9

-Fastest NVIDIA miner available
-New Kernel Improvements
-Removed Redundancies
-5%-10% faster than latest Enemy Miner
-Only displays accepted shares and new blocks

-Mines x16r Ravencoin
-NVIDIA only
-Windows x64
-1% Dev fee

Two GTX 1080s


Download Link:
https://mega.nz/#!OexgzDZL!qZVnRYuTywwtnqiA8ycBYNpD-Zdv0ZxiwuiZnQn02M8

Virus Total:
https://www.virustotal.com/#/file/0dc43963b21dc0ca05ab08fb5c5c6bf6c6cb1a5507ff602ce89f00dc1d5076b8/detection

Do you have linux version?
I need linux version for ethos.

ccminer 2.2.5 crash my rigs. 

[diablo63]

Hello, new optimized sgminer, based on avermore:  https://github.com/KL0nLutiy/sgminer-gm-x16r/releases

cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue:
I am on Windows 10

[18:38:33] CL Platform vendor: Intel(R) Corporation
[18:38:33] CL Platform name: Intel(R) OpenCL
[18:38:33] CL Platform version: OpenCL 2.0
[18:38:33] Error -1: Getting Device IDs (num)
[18:38:33] clDevicesNum returned error, no GPUs usable
[18:38:33] 0 GPU devices max detected

For avermore I use --gpu-platform=1 in the coomand line and it works. It will probably work on other sgminers.

[ganzocrypt]

Hello, new optimized sgminer, based on avermore:  https://github.com/KL0nLutiy/sgminer-gm-x16r/releases

cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue:
I am on Windows 10

[18:38:33] CL Platform vendor: Intel(R) Corporation
[18:38:33] CL Platform name: Intel(R) OpenCL
[18:38:33] CL Platform version: OpenCL 2.0
[18:38:33] Error -1: Getting Device IDs (num)
[18:38:33] clDevicesNum returned error, no GPUs usable
[18:38:33] 0 GPU devices max detected

For avermore I use --gpu-platform=1 in the coomand line and it works. It will probably work on other sgminers.

it does not work. The sgminer with option -n does not see the GPUs.
I have other miners working fine but both these miners do not work.
There are severl DLL included, maybe missing some or needed to be compatible with Win 10 64bit?

[diablo63]

Hello, new optimized sgminer, based on avermore:  https://github.com/KL0nLutiy/sgminer-gm-x16r/releases

cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue:
I am on Windows 10

[18:38:33] CL Platform vendor: Intel(R) Corporation
[18:38:33] CL Platform name: Intel(R) OpenCL
[18:38:33] CL Platform version: OpenCL 2.0
[18:38:33] Error -1: Getting Device IDs (num)
[18:38:33] clDevicesNum returned error, no GPUs usable
[18:38:33] 0 GPU devices max detected

For avermore I use --gpu-platform=1 in the coomand line and it works. It will probably work on other sgminers.

it does not work. The sgminer with option -n does not see the GPUs.
I have other miners working fine but both these miners do not work.
There are severl DLL included, maybe missing some or needed to be compatible with Win 10 64bit?

This is what I have for raven:
@Echo Off
set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
sgminer.exe -k x16r -o stratum+tcp://ravenminer.com:6666 -u RTaFhenRfjegk2Qj8nnngAAwQAu1jMZkTb -p Rig5 --gpu-platform=1 -I 18
pause

This is for pigeon:(currently mining)
@Echo Off
set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
sgminer.exe -k x16s -o stratum+tcp://pool.ominousnetwork.com:3663 -u P8fJjkzrtLsgnZaNgyXmNQtrj3wkvRhUGb -p Rig5 --gpu-platform=1 -I 19
pause

I'm running 6 gigabyte rx560 (gv-rx560gaming oc-4gd)  and 2 powercolor  RX560 mining cards on windows 10

[ganzocrypt]

I have pretty much the same, but if the sgminer does detect GPUs it does not matter which command you pass !

what do you get if you so sgminer -n ?

[pigseye]

Housekeeping issue:

Please wait 15 minutes between posting a new RVN miner.

Thank you for your contribution, next please.


BTW,
Running Enemy 1.08 for a couple of days now. I've got 27 GPUs/miners but I had to take one out yesterday. This makes comparing average hash rates harder, but.... My average 24 hour hash rate is up 5% (even without the dead miner). I think (which doesn't happen much) that the worker was about 4% of my hash rate. So my bad math says Enemy 1.08 is 9% faster than 1.05a for the past 24 hours. (I know my logic is flawed, but 1.08 is faster - at least 5%, maybe a little more).

Hi WickedPigeon,
What GPUs are you mining with?  Are they all 1080s?  If not could you provide a breakdown of what they are?

One of my mining rigs is 1x1070 and 7x1060.  It runs for weeks without a hiccup so I don't want to mess with it if there won't be a significant improvement.

Your insight is greatly appreciated.

Thanks

[cryptobengal]

BTW,
Running Enemy 1.08 for a couple of days now. I've got 27 GPUs/miners but I had to take one out yesterday. This makes comparing average hash rates harder, but.... My average 24 hour hash rate is up 5% (even without the dead miner). I think (which doesn't happen much) that the worker was about 4% of my hash rate. So my bad math says Enemy 1.08 is 9% faster than 1.05a for the past 24 hours. (I know my logic is flawed, but 1.08 is faster - at least 5%, maybe a little more).

yeap I'm seeing the same thing.  :

)looks like a lot of people over at Raven pool are giving it a go 730 out of 6400 now  , im going to give it a go
and see if it cant hash out a few more RVNs in a 24 hr run

[BiteByte]

Housekeeping issue:

Please wait 15 minutes between posting a new RVN miner.

Thank you for your contribution, next please.


BTW,
Running Enemy 1.08 for a couple of days now. I've got 27 GPUs/miners but I had to take one out yesterday. This makes comparing average hash rates harder, but.... My average 24 hour hash rate is up 5% (even without the dead miner). I think (which doesn't happen much) that the worker was about 4% of my hash rate. So my bad math says Enemy 1.08 is 9% faster than 1.05a for the past 24 hours. (I know my logic is flawed, but 1.08 is faster - at least 5%, maybe a little more).

Does Virtopia have block stats somewhere like the times of previous blocks found?

Also I did a day of mining with Enemy108 and my miner hash rate was up slightly but my pool hash rate went down.
I.e. I was averaging 26-34MH/s on the pool which then dropped for the day to 22-31MH/s as soon as I change back the pools zigs and the zags moved up.
...but will try again now for longer because I trust the pigeon.  

OmegaPool.cc stats for any one interested.
Halfway through my 8th day and a missing a few hours when I was testing different miners and pools.
Plus I always reboot if I have stopped a miner twice.

Small pool so there are big gaps sometimes with payouts

5x 1060 range 26-34MH/s With occational peaks of 48MH/s and lows of 21MH/s
P:80 Core:0 Mem:+500
Workers:92 PoolHash:5.5GH CurrentDiif:20922 PoolFee:0.5%

Total earnings last 1 hour: 54.19144416 RVN
Total earnings last 3 hours: 81.02170904 RVN
Total earnings last 24 hours: 138.3418168 RVN
Total earnings last 7 days: 1083.81127264 RVN
Total earnings last 30 days(full 30 not completed): 1207.78908994 RVN

Payouts since the 18th
27.30388529 RVN   04/21/2018 03:52:02
30.01622246 RVN   04/21/2018 01:56:01
32.4353031 RVN   04/20/2018 15:16:02
34.32391895 RVN   04/20/2018 14:54:01
70.87857887 RVN   04/20/2018 08:42:02
30.7663689 RVN   04/20/2018 03:04:02
32.63654414 RVN   04/19/2018 19:24:01
27.56254686 RVN   04/19/2018 18:50:02
40.01876233 RVN   04/19/2018 17:20:02
32.35321515 RVN   04/18/2018 21:40:04
34.21374237 RVN   04/18/2018 11:36:05
31.45534562 RVN   04/18/2018 09:02:04
30.04951849 RVN   04/18/2018 04:02:02
33.99708355 RVN   04/18/2018 01:50:04
30.03061049 RVN   04/18/2018 00:14:01

[EuroLine]

Ravencoin Miner: an optimized open source miner created specifically for Ravencoin.

v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
Cleaned up Display:
-Removed hash order display (Optional)
-Removed first algorithm display (Optional)
-Removed Core clock, GPU temp, and GPU fan speed display, now only displays Efficiency and Power
   -(Afterburner and other programs display this better anyways)
   -Note: Only removed display, the code to monitor these values is unaffected and any options related to them should be available.

Kraww!


Download Link:
https://github.com/Ravencoin-Miner/Ravencoin/releases

Jesser509, are you a guy who developing this miner? Let me know, I have a deal for you

[jesser509]

Ravencoin Miner: an optimized open source miner created specifically for Ravencoin.

v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
Cleaned up Display:
-Removed hash order display (Optional)
-Removed first algorithm display (Optional)
-Removed Core clock, GPU temp, and GPU fan speed display, now only displays Efficiency and Power
   -(Afterburner and other programs display this better anyways)
   -Note: Only removed display, the code to monitor these values is unaffected and any options related to them should be available.

Kraww!
https://imgur.com/a/Zw97u

Download Link:
https://github.com/Ravencoin-Miner/Ravencoin/releases

Jesser509, are you a guy who developing this miner? Let me know, I have a deal for you

Yes that is my miner
I am all ears

[WickedPigeon]

Housekeeping issue:

Please wait 15 minutes between posting a new RVN miner.

Thank you for your contribution, next please.


BTW,
Running Enemy 1.08 for a couple of days now. I've got 27 GPUs/miners but I had to take one out yesterday. This makes comparing average hash rates harder, but.... My average 24 hour hash rate is up 5% (even without the dead miner). I think (which doesn't happen much) that the worker was about 4% of my hash rate. So my bad math says Enemy 1.08 is 9% faster than 1.05a for the past 24 hours. (I know my logic is flawed, but 1.08 is faster - at least 5%, maybe a little more).

Hi WickedPigeon,
What GPUs are you mining with?  Are they all 1080s?  If not could you provide a breakdown of what they are?

One of my mining rigs is 1x1070 and 7x1060.  It runs for weeks without a hiccup so I don't want to mess with it if there won't be a significant improvement.

Your insight is greatly appreciated.

Thanks

I mine with 22 21 X 1070ti and 5 1070 on 5 rigs - mix of brands but mostly MSI Gaming, couple of EVGAs and a Gigibyte or two. I had a couple of bumps re-OCing each rig. I had a real finicky Zotac AMP Extreem 1070ti that keep crashing the rig (I took it off line and gave it to my son in college to upgrade is gaming rig).

After that adjustment, 1.08 has been fine, 18 hours no issues. The cards are slightly OC 75-80%PL, +150,+150 ish range. Hashing is up at least 7%, could be more like 9% over Enemy 1.05a.

1.08 is fast. Really fast.
  

[WickedPigeon]

Hi WickedPigeon,
What GPUs are you mining with?  Are they all 1080s?  If not could you provide a breakdown of what they are?

One of my mining rigs is 1x1070 and 7x1060.  It runs for weeks without a hiccup so I don't want to mess with it if there won't be a significant improvement.

Your insight is greatly appreciated.

Thanks

I'm on Enemy 1.08
Here is some recent comps:

Results: Suprminer 1.6 Vs. Enemy 1.08 Vs. Ravencoin Miner
https://ravenforum.org/topic/31/suprminer-1-6-vs-enemy-1-08-vs-ravencoin-miner-test-results
Normalized Average Results
#1 - 116.17 RVN Enemy
#2 - 107.41 RVN RavenCoin [ -7.54% ]
#3 - 106.97 RVN Suprminer [ -7.93% ]

[EuroLine]

Ravencoin Miner: an optimized open source miner created specifically for Ravencoin.

v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
Cleaned up Display:
-Removed hash order display (Optional)
-Removed first algorithm display (Optional)
-Removed Core clock, GPU temp, and GPU fan speed display, now only displays Efficiency and Power
   -(Afterburner and other programs display this better anyways)
   -Note: Only removed display, the code to monitor these values is unaffected and any options related to them should be available.

Kraww!


Download Link:
https://github.com/Ravencoin-Miner/Ravencoin/releases

Jesser509, are you a guy who developing this miner? Let me know, I have a deal for you

Yes that is my miner
I am all ears

Is there any way to contact you? I can’t PM you.

[jesser509]

Ravencoin Miner: an optimized open source miner created specifically for Ravencoin.

v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
Cleaned up Display:
-Removed hash order display (Optional)
-Removed first algorithm display (Optional)
-Removed Core clock, GPU temp, and GPU fan speed display, now only displays Efficiency and Power
   -(Afterburner and other programs display this better anyways)
   -Note: Only removed display, the code to monitor these values is unaffected and any options related to them should be available.

Kraww!
https://imgur.com/a/Zw97u

Download Link:
https://github.com/Ravencoin-Miner/Ravencoin/releases

Jesser509, are you a guy who developing this miner? Let me know, I have a deal for you

Yes that is my miner
I am all ears

Is there any way to contact you? I can’t PM you.

Few options, first try going to
                                                "Profile",
then                                          "Personal Message Options",
then check the box                     "Allow newbies to send you PMs"

This should allow me to PM you, I am not sure why you can't PM me, you can give it another try though.

Also,

My thread for my miner:
https://bitcointalk.org/index.php?topic=3253808.0

and my Discord name

Discord:
@--Banshee#1413

Discord is preferred as that will allow for quicker communication.