[ANN] Cryptopools shutdown

[Don007]

Yeah, I updated the OP but forgot to post here.  Good to see you are on top of your coin. 

I think there are less than a handful of POS coins with real long term value and DMD is at the top of that short list.

-tb-

I have not really looked into that coin yet, but I think I will later on. However, I've got to buy them instead of mining I guess. The time that mining with a single GPU was actually profitable is over unfortunately. Good to see your pools are still up and running Techbytes!

[1713474316]

1713474316

[1713474316]

1713474316

[1713474316]

1713474316

[DonnyM]

SO is this pool still alive and valid. I set up a test miner to mine curecoin. It is mining away but when I go and try to set up a address to get paid it keeps failing. I know the address is good because I received a payout from CryptobullionPools.
I emailed support from the webpage for http://cure.cryptopools.com yesterday but I have not received a response from anyone.
Am I wasting my hashing power with this pool?
I am using curecoin version v0.1.3.0-g99999-CUR portable wallet.
and CGminer with a U3 for a test. The miner shows up on there site along with its progress. That part seems to be working. Its the account settings specifically the wallet address that is the problem.

Donny

[techbytes]

SO is this pool still alive and valid. I set up a test miner to mine curecoin. It is mining away but when I go and try to set up a address to get paid it keeps failing. I know the address is good because I received a payout from CryptobullionPools.
I emailed support from the webpage for http://cure.cryptopools.com yesterday but I have not received a response from anyone.
Am I wasting my hashing power with this pool?
I am using curecoin version v0.1.3.0-g99999-CUR portable wallet.
and CGminer with a U3 for a test. The miner shows up on there site along with its progress. That part seems to be working. Its the account settings specifically the wallet address that is the problem.

Donny

Pool is running fine.  What are you having problem with?  Payout?

-tb-

[DonnyM]

If you read more than the first line of my post you would see that I am having problems setting up my account for payout. It keep failing when I put in my payout address.
I also tried to email the site and recieve no response which I also put in my post above.

[techbytes]

If you read more than the first line of my post you would see that I am having problems setting up my account for payout. It keep failing when I put in my payout address.
I also tried to email the site and recieve no response which I also put in my post above.

Are you getting any error message?  Did you put in the correct PIN?  What is the address you are trying to add?


-tb-

Edit:  Pool contact email address was never set so all messages were being sent to test@example.com.  This has been fixed.  Sorry for that.

[DonnyM]

 "Are you getting any error message?  Did you put in the correct PIN?  What is the address you are trying to add?"

 error message: Failed to update your account: Failed to update your account
Yes I put in the correct pin.
The address as generated by Curecoin Portable Wallet: B6ZEGPeZUSYJihHTWSYqwQmTT6fk2rCdzA

If I scroll down to the Cash out the Payout line is blocked from entering any text.

Suggestions?

[techbytes]

"Are you getting any error message?  Did you put in the correct PIN?  What is the address you are trying to add?"

 error message: Failed to update your account: Failed to update your account
Yes I put in the correct pin.
The address as generated by Curecoin Portable Wallet: B6ZEGPeZUSYJihHTWSYqwQmTT6fk2rCdzA

If I scroll down to the Cash out the Payout line is blocked from entering any text.

Suggestions?

Block explorer does not recognized your curecoin address.  Make sure it's the correct address.  If you got paid to this address from cryptobullion pool, then it should show on the blockchain.  So confirm the address and make sure it's right.

https://chainz.cryptoid.info/cure/search.dws?q=B6ZEGPeZUSYJihHTWSYqwQmTT6fk2rCdzA

Payout line is blocked because you don't have your payout address defined.


-tb-

[DonnyM]

I tried to use the above address and the below address. The below address is the one I received a payment from cryptobullion pool and it shows up in the search
BK69ojkAUVY5J6vUrkjKnGphqZGtCeMcDw
cryptopools errors on both address's.

[techbytes]

I tried to use the above address and the below address. The below address is the one I received a payment from cryptobullion pool and it shows up in the search
BK69ojkAUVY5J6vUrkjKnGphqZGtCeMcDw
cryptopools errors on both address's.

Ok, PM me your username on the pool and I'll add the above address for you.  Also, what is the reason given after

" Failed to update your account: "


-tb-

Edit:  nvm, reason is failed to update your account...  not sure why though.

[techbytes]

Try creating a new address from your curecoin wallet and use that.  Suprnova has the same issue in one of his pool and that was his suggestion.


-tb-

[DonnyM]

3 different address and I get the same failure

tb
I sent you a PM.

Donny

[usao]

Is it possible to adjust the worker difficulty? I believe my CPU miners are running with a too-high difficulty compared to the earnings I get at other DMD pools.

[0toinvestor]

Does anyone know what's up with dgbsha.cryptopools.com? There is no activity. I cannot connect to the pool and I cannot withdraw any of my earnings from the past few weeks? I have emailed twice but no reply.

[AsidRayne]

Between 12:40am-12:53am (est), the net hashrate skyrocket'd up to 583TH/s for DGCV3

Being a slow miner (up to 7GH/s), I found the blocks were being found within the stratum server faster than my submitted shares, getting rejected just as fast as my ideas to my boss.

Wondering if there's any way that could prevent this, or at least make it not hurt so much. I just got bfgminer working again on ubuntu with a bitfury, 2 antminers and an erupter(because why not. I don't pay for my hydro.)

But needless to say, I've been watching the dashboard for a solid 2 hours now because I like numbers :B

[0toinvestor]

CryptoPools will you please release my DGB earnings?? The autopayout settings have been modified on your end and I am unable to configure them on my end.

I have submitted for multiple manual payouts but they are not being processed. Each time I submit for a payout I receive the message "You already have one active manual payout request."

[techbytes]

CryptoPools will you please release my DGB earnings?? The autopayout settings have been modified on your end and I am unable to configure them on my end.

I have submitted for multiple manual payouts but they are not being processed. Each time I submit for a payout I receive the message "You already have one active manual payout request."

You should be able to update your account settings now and automatic/manual payouts should be working as well.  Let me know otherwise.

Thanks.


-tb-

[techbytes]

Is it possible to adjust the worker difficulty? I believe my CPU miners are running with a too-high difficulty compared to the earnings I get at other DMD pools.

Use port 13374 for lower diff.  Thanks.


-tb-

[0toinvestor]

Yes, it looks like it's working now. It did an auto payout.

You used to have the threshold max at 5000, how come you lowed it to 250?

Thank you for fixing this tb

[techbytes]

Yes, it looks like it's working now. It did an auto payout.

You used to have the threshold max at 5000, how come you lowed it to 250?

Thank you for fixing this tb

It got reset back to the default value when I redid the frontend.  I will change it back to 5000.

-tb-

[intristin]

Thanks for adding Digital Credits, I put a link to your pool on our website. Cheers