aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 14, 2018, 09:40:29 PM Last edit: April 17, 2018, 03:12:18 PM by aerisminer |
|
Hello everyone, This is the first version of the Aeris sgminer for the X17 algorithm. Specs:- RX 570/580 Hashrate: 5.9~6.9Mh/s depending on model/memory/oc settings (stock ~5.9MH/s, Stock with memory Mods ~6.9MH/s).
- RX Vega Hasrate: 11~12MH/s.
- 2% devfee.
This miner is based on sgminer-gm-5.5.5, but the source code is not available for now (let the war against me begin). For the time being, I want to keep the ASM kernels I'm making (they are not great yet, but they'll improve), but I will eventually release the source code. The devfee is 15 seconds of every 750 seconds, starting 60 seconds after the miner starts. Unfortunately for now, if multiple pools are specified, only the first one is used. Set the following enviroment variables (windows code example) setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 Recommended settings for RX 570/580 cards: sgminer -k x17 -o pool -u user -p password --gpu-threads 2 --worksize 256 --intensity 21 Recommended settings for RX Vega cards: sgminer -k x17 -o pool -u user -p password --gpu-threads 2 --worksize 256 --intensity 22 Use less intensity for slower cards (i.e. 19-20 for cards that mines at 2~4MH/s). Some systems can't run 2 threads per GPU. If the miner exists, try with --gpu-threads 1. Reducing intensity may improve rejection due to stale shares. Windows version only. You may need to install Microsoft Visual C++ Redistributable 2013/2015 (x86) if it is not in your system already. Linux version will come too if enough interest is showed. v0.1initial version v0.2+4% performance Downloadhttps://mega.nz/#F!v6JSXBqK!2jQLwNjgaIV3IoN8OHgfzw
|
|
|
|
|
|
Each block is stacked on top of the previous one. Adding another block to the top makes all lower blocks more difficult to remove: there is more "weight" above each block. A transaction in a block 6 blocks deep (6 confirmations) will be very difficult to remove.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
hunghcm
Newbie
Offline
Activity: 49
Merit: 0
|
|
April 15, 2018, 03:12:27 AM |
|
good job, i will check
|
|
|
|
Turkish88
|
|
April 15, 2018, 04:00:24 AM |
|
Some one tested it on RX550 cards, and how it work on 2Gb version?
|
Help to Ukrainian citizens ETH donations adress - 0xe23CB47AC32F0b8750d4D0Dd4e160Fa6F8fF30EF
|
|
|
crocozino
|
|
April 15, 2018, 05:29:07 AM |
|
looks promising, I will definitely test it now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ? I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
|
|
|
|
alucard20724
|
|
April 15, 2018, 06:01:16 AM |
|
not working with the parameters posted.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
|
|
|
|
fapar
Sr. Member
Offline
Activity: 1414
Merit: 267
Undeads.com - P2E Runner Game
|
|
April 15, 2018, 08:10:20 AM Last edit: April 15, 2018, 12:07:22 PM by fapar |
|
Tested on RX480 produces 5.5Mh/s on a standard BIOS without changing memory timings and overclocking. I run the miner itself without using the bat file. The pool shows a speed of 8.1Mh/s. later I will try with optimized timings. Upd. If you use settings from a bat file hashrate rise to 6.3Mh/s
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 15, 2018, 09:02:31 AM Last edit: April 15, 2018, 09:18:08 AM by aerisminer |
|
not working with the parameters posted.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
Try with --gpu-threads 1, some systems can't run 2 threads per GPU. Also, sometimes the miner doesn't start properly after first execution (due to first compilation), but it works as expected from there. The miner switches to devpool at startup just to open the connection (and keeps it open), then switches back to user pool.
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 15, 2018, 09:28:04 AM Last edit: April 15, 2018, 09:41:21 AM by aerisminer |
|
looks promising, I will definitely test it now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ? I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
yiimp.eu is a good pool to mine Verge, but it got saturated the last time Verge raised (way too many people jumped in). zpool.ca is a also a good pool and, in fact, more rewarding due to mine the most profitable X17 coin(s), and you can get paid in Verge if they're actively mining it (they are at the moment), which usually results in more XVG paid per MH/s. The BAT example I included in the miner uses zpool.ca for this reason. Just make sure you leave c=XVG as password and use your XVG address as username to get paid in Verge.
|
|
|
|
metscoin
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
April 17, 2018, 12:37:21 PM Last edit: April 18, 2018, 09:52:44 AM by metscoin |
|
All AMD guys wanting to try are welcome at The HIVE
QueenBee Hive Mining Pool
VERGE x17 Pool: https://hive.gulfcoastmining.com/Payouts every 2 hours Pool pays all transaction fees Low Payouts: 0.01 | 0.001 on Sundays Hosted on Google's best-in-class Cloud Sample mining string: sgminer -k x17 -o stratum+tcp://hive.gulfcoastmining.com:3737 -u WALLETADDRESS -p c=XVG --gpu-threads 2 --worksize 256 --intensity 21 FOR POOL MINING SUPPORT AND COMMUNITY, JOIN OUR DISCORD Discord - https://discord.gg/HX3ftkU
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 17, 2018, 03:13:02 PM |
|
New version v0.2: +4% performance
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
April 17, 2018, 03:16:02 PM |
|
New version v0.2: +4% performance
Do you have plans to support/improve other algos? We miss a sgminer like tvuprot's ccminer, with a great performance for most algorithms. My AwesomeMiner have around 10 differents sgminers, one for each algorithm
|
|
|
|
Etherion
|
|
April 17, 2018, 03:21:53 PM Last edit: April 17, 2018, 04:12:51 PM by Etherion |
|
nice. going to try this on my RX480. pitty my 1070s does 12.5mhs for 150w so not sure if there will be much of an uptake if power is worst
|
|
|
|
Etherion
|
|
April 17, 2018, 03:48:58 PM |
|
My test rig has both AMD and Nvidia so I had to add the platform switch. I hope this helps.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 sgminer -k x17 -o stratum+tcp://X17.mine.zpool.ca:3737 -u BTCADDRESS -p {name},c=BTC --gpu-platform 2 --gpu-threads 2 --worksize 256 --intensity 21 pause
The result are ok. 6.9mhs for 140w at the wall. not the 11.5mhs for 120w on the 1070's but might be more profitable than other algo's right now. Let hope the Pornhub news keeps verge pumping
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 17, 2018, 03:55:25 PM Last edit: April 17, 2018, 11:05:40 PM by aerisminer |
|
nice. going to try this on my RX480. pitty my 1070s does 12mhs for 150w so not sure if there will be much of an uptake of power is worst
Power consumption is greatly affected by settings. My RX580 at 1200MHz@900mv core, 2050MHz memory does ~6.9MH/s drawing 100.9W measured with a clamp-on ammeter (from PSU, add ~10% from the wall). In the other hand, my old RX470 at 1100MHz@950mv core, 1875MHz memory does 5.9MH/s drawing 98.4W. New version v0.2: +4% performance
Do you have plans to support/improve other algos? We miss a sgminer like tvuprot's ccminer, with a great performance for most algorithms. My AwesomeMiner have around 10 differents sgminers, one for each algorithm I plan to add more algos in the future, but it will take me some time.
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 18, 2018, 11:33:12 AM |
|
Hi,
I have RX 480 and I wana mine XVG but I am trying to finding out support for AMD on youtube n many forums but I could not find. Can you please help me. I tried this but it did not work ...........if any body come and take my PC teamviewer and help me bcoz I have tried so many things but nothing could work.
NEED HELP
Thanks,
Regards
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 18, 2018, 12:11:47 PM |
|
I downloaded this software and tried every thing but it did not work and it pause after initializing.... Please advise
tried according to your advise n tried then changing parameters
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 18, 2018, 12:49:15 PM |
|
I downloaded this software and tried every thing but it did not work and it pause after initializing.... Please advise
tried according to your advise n tried then changing parameters
Could you please share a screenshot when the miner is paused? Thank you.
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 19, 2018, 06:22:59 AM |
|
how to add image here. I click on insert image it does not ask for path directly put this http:// ... with pause window you will not get any clue better if you try it on my pc via Teamviewer...
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 19, 2018, 06:39:36 AM |
|
Or can you give me you Discord id or skype ?
|
|
|
|
Grim
|
|
April 19, 2018, 09:41:41 AM |
|
why setx GPU_FORCE_64BIT_PTR 0
and not setx GPU_FORCE_64BIT_PTR 1
?
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 19, 2018, 09:54:55 AM |
|
If anyone successfully have working this with AMD please give their details.... software ver. batch file and .conf file details.
Thanks,
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 19, 2018, 10:56:31 AM |
|
If anyone successfully have working this with AMD please give their details.... software ver. batch file and .conf file details.
Thanks,
I tried to PM you but you didn't configure your account to accept PMs from newbies (I'm still a newbie with this account). You can enable this in Profile -> Personal Message Options -> Allow newbies to send you PMs. Could you try to run the miner with the following command line? sgminer -k x17 -o pool -u user -p password --gpu-threads 2 --worksize 256 --intensity 21 2>log.txt That will generate a log.txt file in the folder you run the command. Copy and paste the contents of that file and send it to my by PM so I can examine it. Also, it would be helpful if you could take a screenshot and upload it to this image hosting website, and send me the link so I can have a look when the miner pauses. https://imgur.com/New post -> upload images Unfortunately I don't have discord or Skype accounts. Sorry. why setx GPU_FORCE_64BIT_PTR 0
and not setx GPU_FORCE_64BIT_PTR 1
?
This algo doesn't require huge amount of memory. Setting GPU_FORCE_64BIT_PTR to 1 could potentially hurt performance since memory access would require twice the number of clock cycles.
|
|
|
|
4ward
Member
Offline
Activity: 473
Merit: 18
|
|
April 19, 2018, 11:50:57 AM |
|
why setx GPU_FORCE_64BIT_PTR 0
and not setx GPU_FORCE_64BIT_PTR 1
?
This algo doesn't require huge amount of memory. Setting GPU_FORCE_64BIT_PTR to 1 could potentially hurt performance since memory access would require twice the number of clock cycles. I also believe it is redundant to set this to 1 with reasonably new drivers. I'm using GPU_FORCE_64BIT_PTR=0 for at least half a year and am yet to find a miner/algo that didn't work with that on RX480 in windows 10 (and I believe I have tried almost every miner/algo for AMD available)
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 20, 2018, 05:42:05 AM |
|
Hi,
How are you?
I am getting this error.
[15:06:42] Started sgminer 5.5.5-aeris [15:06:42] * using Jansson 2.11 [15:06:42] Loaded configuration file sgminer.conf [15:06:42] Specified platform that does not exist [15:06:42] clDevicesNum returned error, no GPUs usable [15:06:42] All devices disabled, cannot mine!
The written sgminer.conf file here
{ "pools": [ { "name":"zPool", "priority": "0", "url": "stratum+tcp://x17.mine.zpool.ca:3737", "user": "DPdaJWsCsxBwhEmtghQC4UTTqBDmRNuyBk", "pass": "c=XVG", "profile": "verge" } ], "profiles": [ { "name": "verge", "algorithm": "x17", "lookup-gap" : "2", "intensity": "22", "gpu-threads" : "2" } ], "default-profile": "verge", "quiet": false, "gpu-platform" : "1" }
Please advise where is the issue
I have Rx480 with 8GB ram
Thanks,
Regards,
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 20, 2018, 07:30:29 AM |
|
Hi,
How are you?
I am getting this error.
[15:06:42] Started sgminer 5.5.5-aeris [15:06:42] * using Jansson 2.11 [15:06:42] Loaded configuration file sgminer.conf [15:06:42] Specified platform that does not exist [15:06:42] clDevicesNum returned error, no GPUs usable [15:06:42] All devices disabled, cannot mine!
Try with Also, I recommend intensity 21 instead 22 for your RX 480
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 20, 2018, 12:19:26 PM |
|
I tried but still same error please add me on skype this strange platform to talk.... can not send reply more than 1 for a few hours..... skype id: intelligent_co1 phonenumber whatsapp: +92-3214437579 Thanks
|
|
|
|
aerisminer (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 20, 2018, 02:30:49 PM |
|
I tried but still same error please add me on skype this strange platform to talk.... can not send reply more than 1 for a few hours..... skype id: intelligent_co1 phonenumber whatsapp: +92-3214437579 Thanks Hello Wasim80, I am sorry to hear that you are still having problems. I want to help you, but I would like to keep all communications within this forum. If you can send me the logs and/or a screenshot, I will be able to assist you further. Thank you.
|
|
|
|
Wasim80
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 23, 2018, 05:35:53 AM |
|
This forum is not allow more than 1 or 2 messages dear.............
|
|
|
|
Primus Pilus
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 10, 2018, 03:30:38 PM |
|
nice. going to try this on my RX480. pitty my 1070s does 12.5mhs for 150w so not sure if there will be much of an uptake if power is worst
Hi sorry for reviving and old thread, But i am really curious how you were able to hit 12.5Mhs for 150w on a 1070 please. I have not been able to get close to that on 1070 ti's.
|
|
|
|
|