Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin).

[UselessGuru]

I change bat file to select only gpu1 and gpu2 but not gpu3? How can I do this?

add -d 0,1

z-enemy.exe --help is your friend :-)

[1713998075]

1713998075

[1713998075]

1713998075

[1713998075]

1713998075

[mrsalve01]

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

[@enemy]

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex   new  algo ,  new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much  important at all (if you do not care about the profit) .

[mrsalve01]

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex   new  algo ,  new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much  important at all (if you do not care about the profit) .

Got over intensity problem . It works ok with 23 now.

I need to try power limit thou because with 1.15a. and 1.16 proble is that it works 2-3H and then it crashes miner so bad that only restart helps.
I even tryed afterburner off. Same thing.

It's all with hex algo.

Tryed x16r run'd about 5 hours without a problems.

[tazmako]

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex   new  algo ,  new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much  important at all (if you do not care about the profit) .

Got over intensity problem . It works ok with 23 now.

I need to try power limit thou because with 1.15a. and 1.16 proble is that it works 2-3H and then it crashes miner so bad that only restart helps.
I even tryed afterburner off. Same thing.

It's all with hex algo.

Tryed x16r run'd about 5 hours without a problems.

thanks i have same problem with hex too

[DumaxFr]

Suggestion / feature request

Please add --benchmark parameter.

E.g. for X16r it would benchmark each of the 16 sub-algorithms n times and then report the average hash rate.

In theory this will produce the most accurate hash rate average because over time each sub-algorithm would be run equally often.

Any thoughts?

Most kernels don't have the same timings if they are first (or last). There is also some kernel sequences that reduce timings ("imported" from ccminer X17).
All those optimisation tricks make benchmark inaccurate for X16x

[dual77]

The latest version 1.16 of the miner works very stable!
I can say that I noticed an increase in my hashrate,
so I'd like to thank the developer for his work and that the most important thing is that he always updates the miner without bugs!

[@enemy]

Z-ENEMY VER 1.17 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:
For maximum performance make sure you have latest drivers  (ver. 398+)
http://www.nvidia.com/Download/index.aspx 

Greetings, fellow miners! We're releasing an updated version of our mining software with some speed inside:

-  Major performance improvements: 5-10% for X16R & X16S, XDNA (hex), x17, Bitcore(BTX), c11, Sonoa, Renesis, Aergo
-  Lower end cards like 1050/1060 will see additional few %  (yes, a bonus)
-  The miner no longer depends on memory, it allows to run memory clock at +0 or -500 MHz without performance loss.

Happy mining!

Windows :
Cuda 9.1 x32 : https://mega.nz/#!hbQQyIBD!IAvlCaKdjtZtvYx0IRLdLWoYHJIPHm2HC0yltgytq30
Cuda 9.1 x64 : https://mega.nz/#!xeBC1QKa!9xqhC51iMUIZ4cSw_MkZUDfPXeqT5XMFuOvoWPkCLgk

Cuda 9.2 x32 : https://mega.nz/#!cOZmTI5S!o9jzJeSTAeKxuX7a-MXgUZja_PnuRBubdCWd_pouQRU
Cuda 9.2 x64 : https://mega.nz/#!caZWnCIK!bNEiavwcSUPnAFev4s4cU1gtzUa5HqiGssaPThPJWy8

Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!xHQUxAzZ!rLlge4ZPqkaescfUHoZmAGqS_zqjuIty6aOao0Y__54
Cuda 9.1 : https://mega.nz/#!ZPZETQBR!OB7TkaPVJB4NBlz_mXM80ToITxjb7Us6158KN8ilqnY
Cuda 9.2 : https://mega.nz/#!xfI2nawC!Wx_oQbMU3veo_rjUkmNliiaizzGGIGEYbVJboLIL6sQ

[TheKryptonian]

Z-ENEMY VER 1.17 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:
For maximum performance make sure you have latest drivers  (ver. 398+)
http://www.nvidia.com/Download/index.aspx 

Greetings, fellow miners! We're releasing an updated version of our mining software with some speed inside:

-  Major performance improvements: 5-10% for X16R & X16S, XDNA (hex), x17, Bitcore(BTX), c11, Sonoa, Renesis, Aergo
-  Lower end cards like 1050/1060 will see additional few %  (yes, a bonus)
-  The miner no longer depends on memory, it allows to run memory clock at +0 or -500 MHz without performance loss.

Happy mining!

Windows :
Cuda 9.1 x32 : https://mega.nz/#!hbQQyIBD!IAvlCaKdjtZtvYx0IRLdLWoYHJIPHm2HC0yltgytq30
Cuda 9.1 x64 : https://mega.nz/#!xeBC1QKa!9xqhC51iMUIZ4cSw_MkZUDfPXeqT5XMFuOvoWPkCLgk

Cuda 9.2 x32 : https://mega.nz/#!cOZmTI5S!o9jzJeSTAeKxuX7a-MXgUZja_PnuRBubdCWd_pouQRU
Cuda 9.2 x64 : https://mega.nz/#!caZWnCIK!bNEiavwcSUPnAFev4s4cU1gtzUa5HqiGssaPThPJWy8

Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!xHQUxAzZ!rLlge4ZPqkaescfUHoZmAGqS_zqjuIty6aOao0Y__54
Cuda 9.1 : https://mega.nz/#!ZPZETQBR!OB7TkaPVJB4NBlz_mXM80ToITxjb7Us6158KN8ilqnY
Cuda 9.2 : https://mega.nz/#!xfI2nawC!Wx_oQbMU3veo_rjUkmNliiaizzGGIGEYbVJboLIL6sQ

Great, thank you!  No improvement to Xevan?  I thought I had read Xevan is based on X17, but I don't know much about this stuff.

[ggillies]

Z-ENEMY VER 1.17 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:
For maximum performance make sure you have latest drivers  (ver. 398+)
http://www.nvidia.com/Download/index.aspx 

Greetings, fellow miners! We're releasing an updated version of our mining software with some speed inside:

-  Major performance improvements: 5-10% for X16R & X16S, XDNA (hex), x17, Bitcore(BTX), c11, Sonoa, Renesis, Aergo
-  Lower end cards like 1050/1060 will see additional few %  (yes, a bonus)
-  The miner no longer depends on memory, it allows to run memory clock at +0 or -500 MHz without performance loss.

Happy mining!

Windows :
Cuda 9.1 x32 : https://mega.nz/#!hbQQyIBD!IAvlCaKdjtZtvYx0IRLdLWoYHJIPHm2HC0yltgytq30
Cuda 9.1 x64 : https://mega.nz/#!xeBC1QKa!9xqhC51iMUIZ4cSw_MkZUDfPXeqT5XMFuOvoWPkCLgk

Cuda 9.2 x32 : https://mega.nz/#!cOZmTI5S!o9jzJeSTAeKxuX7a-MXgUZja_PnuRBubdCWd_pouQRU
Cuda 9.2 x64 : https://mega.nz/#!caZWnCIK!bNEiavwcSUPnAFev4s4cU1gtzUa5HqiGssaPThPJWy8

Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!xHQUxAzZ!rLlge4ZPqkaescfUHoZmAGqS_zqjuIty6aOao0Y__54
Cuda 9.1 : https://mega.nz/#!ZPZETQBR!OB7TkaPVJB4NBlz_mXM80ToITxjb7Us6158KN8ilqnY
Cuda 9.2 : https://mega.nz/#!xfI2nawC!Wx_oQbMU3veo_rjUkmNliiaizzGGIGEYbVJboLIL6sQ

Love this miner, but can we PLEASE, PLEASE, PLEASE have Lyra2v2 and LyraZ..  Please?

[@enemy]

We’re getting reports of bugged xevan, please use 1.16 while we investigate and fix it.

[JW_B]

is this miner available with nvidia 396. driver on ubuntu?

there is no 398. ubuntu nvidia driver.

[Divinity666]

It's weird but 1.16 and 1.17 receive different jobs from nicehash on x16r, how is that possible? When they start job's sequence is the same and 1.17 is 10%+ faster, but next job's sequence 1.17 gets may have move difficult algos so 1.16 gets ahead in speed...

[msallak1]

Hey Enemy.
Could you please try to implement hash-rate history in the miner so it can shows average speed for the last 5 min , 15 mins , 60 mins. I am talking for x16r :]

[Divinity666]

Hey Enemy.
Could you please try to implement hash-rate history in the miner so it can shows average speed for the last 5 min , 15 mins , 60 mins. I am talking for x16r :]

good idea

[ciprianpt]

Hey i just published my review and benchmarks for z-enemy nvidia gpu miner, the results can be found here https://1stminingrig.com/z-enemy-1-16-nvidia-miner-review-and-benchmarks/

[jugger1028]

Hey i just published my review and benchmarks for z-enemy nvidia gpu miner, the results can be found here https://1stminingrig.com/z-enemy-1-16-nvidia-miner-review-and-benchmarks/

Excellent job on the review my man, I have to say, I don't get why Devs never have a cover sheet of the algos and hashrates. I guess it's because they don't want to be compared to others unfavorably but my god what a hassle to get the stats you need for your cards. I commend you on putting this review together and providing such a high level of detail. Good job..

[ciprianpt]

Hey i just published my review and benchmarks for z-enemy nvidia gpu miner, the results can be found here https://1stminingrig.com/z-enemy-1-16-nvidia-miner-review-and-benchmarks/

Excellent job on the review my man, I have to say, I don't get why Devs never have a cover sheet of the algos and hashrates. I guess it's because they don't want to be compared to others unfavorably but my god what a hassle to get the stats you need for your cards. I commend you on putting this review together and providing such a high level of detail. Good job..

Thank you very much! maybe they want the users to post their results for each algo, i also don't get it why there is not excel file nicely done for each algo with different gpus and also clock recommendation, will be soo much easier for people who wants to use the miner.. anyway i don't mind to do it even if it takes around 3-4 days

[Vokas123]

Hey i just published my review and benchmarks for z-enemy nvidia gpu miner, the results can be found here https://1stminingrig.com/z-enemy-1-16-nvidia-miner-review-and-benchmarks/

Excellent job on the review my man, I have to say, I don't get why Devs never have a cover sheet of the algos and hashrates. I guess it's because they don't want to be compared to others unfavorably but my god what a hassle to get the stats you need for your cards. I commend you on putting this review together and providing such a high level of detail. Good job..

Thank you very much! maybe they want the users to post their results for each algo, i also don't get it why there is not excel file nicely done for each algo with different gpus and also clock recommendation, will be soo much easier for people who wants to use the miner.. anyway i don't mind to do it even if it takes around 3-4 days

Check your numbers again, from a quick glance i can see you have errors in hashrate for sonoa and bitcore.

[Snapper00]

Anyone know what this means?

Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : unspecified launch failure.

Try a lower intensity.  On the command line put --intensity=19 and see if it persists.