SHIPPED Dec 3 - [GROUP BUY] Bitmain AntMiner S1 180 GH/S 50 Units

[AMuppInTime]

stuck in warehouse in Ca - status says "Awaiting release from Clearance/Government Agency."

I spoke to UPS international on the phone and they confirmed that the package had cleared customs at a prior time than the timestamp used for the "Awaiting release from Clearance/Government Agency." timestamp. My shipment status went from "in Warehouse" to "Exception" (noting unexpected event).

Another gov branch looking more closely?

*Edit*: My status just reverted to "In Warehouse" now... weird. nope - back to exception was looking at old tab.

Current status is "Out for Delivery"

[ineedit]

My thanks Sushi for stepping in and Bitmain for delivering

I have a status screen full of 0's and the unit is hashing at 183GH/s whist drawing 450W at the wall with a steady temp of 48c and an ambient of 23c.

Fekkin' marvellous!

[novymivo]

i just received the second unit.
Everything works fine.
Thanks

[pdawg]

My thanks Sushi for stepping in and Bitmain for delivering

I have a status screen full of 0's and the unit is hashing at 183GH/s whist drawing 450W at the wall with a steady temp of 48c and an ambient of 23c.

Fekkin' marvellous!

450W seems a bit more than advertised no?

[bitterdog]

My thanks Sushi for stepping in and Bitmain for delivering

I have a status screen full of 0's and the unit is hashing at 183GH/s whist drawing 450W at the wall with a steady temp of 48c and an ambient of 23c.

Fekkin' marvellous!

450W seems a bit more than advertised no?

Get your pitchforks ready! 

[ineedit]

My thanks Sushi for stepping in and Bitmain for delivering

I have a status screen full of 0's and the unit is hashing at 183GH/s whist drawing 450W at the wall with a steady temp of 48c and an ambient of 23c.

Fekkin' marvellous!

450W seems a bit more than advertised no?

Get your pitchforks ready! 

I've got the matches, anyone got any straw...

[ineedit]

My thanks Sushi for stepping in and Bitmain for delivering

I have a status screen full of 0's and the unit is hashing at 183GH/s whist drawing 450W at the wall with a steady temp of 48c and an ambient of 23c.

Fekkin' marvellous!

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up. The original spec from the Bitmain launch thread was
Hash rate: 80 ~ 100 GH/s
Power consumption: 80 ~ 200 W on wall

and that is per blade so no too far off but is at the upper end of the scale, I would have preferred the lower end or 160w but I can live with it.

[finlof]

if you feel "brave" then you can overclock fairly easily.  after overclock i am running one of mine at 200gh/s and one at 180gh/s - see this thread https://bitcointalk.org/index.php?topic=348327.0

[gbsray]

Not yet but if you could shoot me an email at joshmon@e-mail.ph. I will keep you inform as soon as I know a group buy, auctions I, last minutes cancellations and other I stock ASIC sales elsewhere!

Sushi, any word when the next batch of these will be coming round the mountain? thx!

Interested to get in on the next batch also. I'll send an email with my details if thats ok. Thanks

[finlof]

Would you kind enough to post a close up of your PSU to be able to see the brand?

Also close look on your wire connections!

Also if the wires are getting hotter or not.

Also the hard reboot the power cycle and take some sample status on the ant miners in a few hours time frame. Such as 39 minutes between or an hour between? 

Thank you!

the one that had the 7 x's is running off a 1000 watt power supply, but i only had 2x 4-pin molex power to each blade (cause i didnt want to cut up the 6 or 8-pin connectors).  so i shut it down and added an additional molex power to each blade.  after that i have no x's and it's running at full speed.  THANKS!

[Xer0]

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up.
[/quote]
yep, same here, 445W with two PSUs

[sushi]

That is about 80w higher than what I measured. Are you running it in the normal household room with hearted on for the winter or regular office setup or in the cooler area?

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up.

yep, same here, 445W with two PSUs
[/quote]

[pdawg]

I have an Antec 650 80 Plus, I'll report what it draws.

[Slesh]

Got mine yestarday and now hashing. Perfect and easy setup.
Thank you Bitmain and mainly Sushi for support and for fast delivery. Looking to buy some more of these ants.

[sushi]

Thank you for the kind words!   

Happy Mining!

Got mine yestarday and now hashing. Perfect and easy setup.
Thank you Bitmain and mainly Sushi for support and for fast delivery. Looking to buy some more of these ants.

[ineedit]

That is about 80w higher than what I measured. Are you running it in the normal household room with hearted on for the winter or regular office setup or in the cooler area?

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up.

yep, same here, 445W with two PSUs

Normal house with winter heating on but burning less heating oil as we have a 450w electric heater in one of the rooms  

[sushi]

But your heater  bring you BTC while burning!!!   

That is about 80w higher than what I measured. Are you running it in the normal household room with hearted on for the winter or regular office setup or in the cooler area?

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up.

yep, same here, 445W with two PSUs

Normal house with winter heating on but burning less heating oil as we have a 450w electric heater in one of the rooms  

[ineedit]

But your heater  bring you BTC while burning!!!   

That is about 80w higher than what I measured. Are you running it in the normal household room with hearted on for the winter or regular office setup or in the cooler area?

450W seems a bit more than advertised no?

Yes but I am running two old Corsair powers supplies to get both blades up.

yep, same here, 445W with two PSUs

Normal house with winter heating on but burning less heating oil as we have a 450w electric heater in one of the rooms  

That's the good bit! But I am going to have to put all my mining kit into the garage during the summer unless I can get it to heat water instead, now there's a thought, a BTC hot water heater.

I have a couple of quiet PWN fans on order, one for each end. I will also see if I can put a tunnel around it to reduce the noise and cooling then I can put one into the living spaces.

[Xer0]

That is about 80w higher than what I measured. Are you running it in the normal household room with hearted on for the winter or regular office setup or in the cooler area?

in the cellar, so rather cool

but both psu are cheap noname ones and one of them is rather old (ATX 1.x)

[boerdi]

Hi sushi,

do you deliver to Austria too. if yes - when you can deliver, how long it will take, and what are the costs for delivery?

thanks & kr, boerdi