[ANN][DOGE] Dogecoin - very currency many coin - v1.10.0

[tbct_mt2]

Anyone know how to get a hold of him?

With Dogecoin, you don't need developers. It is a coin for fun but you can speculate it and get profit. It is not a joke. The pump 2 days ago proves that it is not a joke.

Many people regret that they did not buy Dogecoin when price is below or around 20 satoshis. Now they hope they will see that price again. They will see it again but the question, will they buy the coin when this price comes back? I believe they will hesitate, fear again and will regret later again.

[D3m0nKinGx]

Doge is running !

[PeterColumboFalk]

My host with 510 active connections has a response time in the magnitude order of a minute. Too high maxconnections could make it worse. I reduced it to 128 connections and observe it.

[mcsean2163]

Anyone know if poloniex will ever re-enable the wallets?

Currently 116 poloniex v 135 binance

I need to get my dogecoin out of that exchange, pronto!

[PeterColumboFalk]

I'm finished for this time. My host 103.243.173.214:22556 has 32 maxconnections, a response time (ping) far lower than 1 second, and uses one complete core of the cpu. I will let it untouched this way. From 29 active connections only 5 are current, the remaining has to catch up. This perhaps explains the high cpu load. My system uses a nvme ssd, this is no bottleneck, waiting time for drive access is very low.

[D3m0nKinGx]

Been looking more into this SatoshiStreetBets on reddit, seems they also targeted the Silver commodity market (which I'm happy to see that my portfolio made some nice gains lol). And from checking the reddit forum they're still shilling Doge pretty hard, could be interesting next days/weeks ahead.

A lot of talk amongst them about best ways to buy doge through coinbase and binance. Funny nobody mentioned you can instant buy them on bittrex... a lot of noobs there from the looks of it.

[D3m0nKinGx]

I'm finished for this time. My host 103.243.173.214:22556 has 32 maxconnections, a response time (ping) far lower than 1 second, and uses one complete core of the cpu. I will let it untouched this way. From 29 active connections only 5 are current, the remaining has to catch up. This perhaps explains the high cpu load. My system uses a nvme ssd, this is no bottleneck, waiting time for drive access is very low.

hmm usually high cpu load is during block downloading/syncing/verifying transactions, but you are also only using one cpu (4 cores i assume?). If you have the available memory, set your `dbcache=2000` in the dogecoin.conf file. this significantly helps with syncing. and reduces usage of the storage drive, keeping more data in ram.

[gost111]

DOGE still does not give up their positions, perhaps in the near future we will see another growth ,it will be interesting to watch this 

[PeterColumboFalk]

I'm finished for this time. My host 103.243.173.214:22556 has 32 maxconnections, a response time (ping) far lower than 1 second, and uses one complete core of the cpu. I will let it untouched this way. From 29 active connections only 5 are current, the remaining has to catch up. This perhaps explains the high cpu load. My system uses a nvme ssd, this is no bottleneck, waiting time for drive access is very low.

hmm usually high cpu load is during block downloading/syncing/verifying transactions, but you are also only using one cpu (4 cores i assume?). If you have the available memory, set your `dbcache=2000` in the dogecoin.conf file. this significantly helps with syncing. and reduces usage of the storage drive, keeping more data in ram.

I have configured dbcache=2048 for all testing now. Even with only 15 maxconnections I have a full load on one core:

Code:

# output of top(1)
top - 06:00:14 up 48 days, 13:46,  5 users,  load average: 2.27, 2.40, 2.34
Tasks: 252 total,   1 running, 251 sleeping,   0 stopped,   0 zombie
%Cpu(s):  9.1 us,  1.7 sy,  6.7 ni, 78.5 id,  0.4 wa,  0.0 hi,  3.7 si,  0.0 st
MiB Mem :  64225.1 total,    446.5 free,  20889.6 used,  42889.0 buff/cache
MiB Swap:  17360.0 total,  12809.9 free,   4550.1 used.  43043.0 avail Mem

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
4164700 doge      20   0 2666100   1.2g 132444 S  98.4   1.9  11:48.79 dogecoind

I have a 6 core 12 thread host. I don't want more cpu usage by one wallet daemon, so this is ok for me, more load is unwanted.

My daemon mostly is some blocks behind the current block. The connected hosts are lagging too. My last block is 3589562, the current one from blockchair is 3589563. I'm nearly current, but the load stays near 100%.

Code:

$ ./dogecoin-cli getpeerinfo | grep startingheight
    "startingheight": 3589535,
    "startingheight": 4688,
    "startingheight": 13904,
    "startingheight": 15676,
    "startingheight": 3589458,
    "startingheight": 536920,
    "startingheight": 3589489,
    "startingheight": 3589509,
    "startingheight": 3589550,
    "startingheight": 3589407,
    "startingheight": 28951,
    "startingheight": 4552,

I have a 64 GByte host, and only 1/3 of the memory is used, the remaining is drive cache.

Can this info explain the high load? totalbytessent is incredible high in comparison to totalbytesrecv. And the sent counter rises quickly, after a few minutes it's 1 GByte more.

Code:

$ ./dogecoin-cli getnettotals
{
  "totalbytesrecv": 8300980,
  "totalbytessent": 4952289892,
  "timemillis": 1612177939714,
  "uploadtarget": {
    "timeframe": 86400,
    "target": 0,
    "target_reached": false,
    "serve_historical_blocks": true,
    "bytes_left_in_cycle": 0,
    "time_left_in_cycle": 0
  }
}

My host is ubuntu 20.04.1 LTS. The wallet comes from https://github.com/dogecoin/dogecoin/releases, file is dogecoin-1.14.2-x86_64-linux-gnu.tar.gz, md5sum is ecc01479161d3c872f0b725f184c8983.

[rukabilgisayar]

Please, give me dogecoin nodes list v1.14.2! Thanks!

Admin:

AikaPool

Hello, why does the system not send our dogecoin earnings. Why don't you pay?

User ID : rukabilgisayar
Mail : skyeagleseo@gmail.com

[zettelkasten]

elon had this to say about DOGE when he was on clubhouse recently:

https://twitter.com/Beasterbxe/status/1356131712477114369



 

[D3m0nKinGx]

I'm finished for this time. My host 103.243.173.214:22556 has 32 maxconnections, a response time (ping) far lower than 1 second, and uses one complete core of the cpu. I will let it untouched this way. From 29 active connections only 5 are current, the remaining has to catch up. This perhaps explains the high cpu load. My system uses a nvme ssd, this is no bottleneck, waiting time for drive access is very low.

hmm usually high cpu load is during block downloading/syncing/verifying transactions, but you are also only using one cpu (4 cores i assume?). If you have the available memory, set your `dbcache=2000` in the dogecoin.conf file. this significantly helps with syncing. and reduces usage of the storage drive, keeping more data in ram.

I have configured dbcache=2048 for all testing now. Even with only 15 maxconnections I have a full load on one core:

Code:

# output of top(1)
top - 06:00:14 up 48 days, 13:46,  5 users,  load average: 2.27, 2.40, 2.34
Tasks: 252 total,   1 running, 251 sleeping,   0 stopped,   0 zombie
%Cpu(s):  9.1 us,  1.7 sy,  6.7 ni, 78.5 id,  0.4 wa,  0.0 hi,  3.7 si,  0.0 st
MiB Mem :  64225.1 total,    446.5 free,  20889.6 used,  42889.0 buff/cache
MiB Swap:  17360.0 total,  12809.9 free,   4550.1 used.  43043.0 avail Mem

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
4164700 doge      20   0 2666100   1.2g 132444 S  98.4   1.9  11:48.79 dogecoind

I have a 6 core 12 thread host. I don't want more cpu usage by one wallet daemon, so this is ok for me, more load is unwanted.

Ah ok, I have to point out something for you in what you indicated:  I have a 6 core 12 thread host. This is crucial point. That means the 100% load, is actually only 1 core being used of your cpu. If you were using all the cores it would be showing 600% usage not 100. This is how Linux delineates % cpu usage, by cores not the cpu unit as a whole.

So 100% = 1 core

You can see this better using the program HTOP: sudo apt install htop, it will also show you the affinity as well (number of cores the program is allowed access to), which you can change easily with htop.

[D3m0nKinGx]

https://prnt.sc/xz4hi4

As seen here on my system same thing 97% cpu but only one on of my cores So it's 97% out of 400% of my cpu is being used (I have 4 cores)

[PeterColumboFalk]

https://prnt.sc/xz4hi4

As seen here on my system same thing 97% cpu but only one on of my cores So it's 97% out of 400% of my cpu is being used (I have 4 cores)

How many connections do you serve with your configuration?

I have now set maxconnections to 10, and my one core load has dropped to around 50%. The totalbytessent rises fast, so I believe the the cpu load is needed to serve the connections. In this case it's nearly impossible to serve 500 connections simultaniosly.

I have a limit of 5 TByte monthly internet traffic, and try to increase it. Doge alone will fill my traffic limit quickly.

[TeraBite]

DOGE still does not give up their positions, perhaps in the near future we will see another growth ,it will be interesting to watch this 

It's not easy for any large cap coin to stay on high position without any use case or mass adoption at the moment there is only manipulation going on and big whales are dumping their bags on noobs. When this hype will be over than people will remember this pump as nightmare because this is not an organic growth.

[D3m0nKinGx]

https://prnt.sc/xz4hi4

As seen here on my system same thing 97% cpu but only one on of my cores So it's 97% out of 400% of my cpu is being used (I have 4 cores)

How many connections do you serve with your configuration?

I have now set maxconnections to 10, and my one core load has dropped to around 50%. The totalbytessent rises fast, so I believe the the cpu load is needed to serve the connections. In this case it's nearly impossible to serve 500 connections simultaniosly.

I have a limit of 5 TByte monthly internet traffic, and try to increase it. Doge alone will fill my traffic limit quickly.

Either way unless you are using 600% of your total cpu resources, You shouldn't worry, using max % of just one core is nothing. You're way below the threshold. And changing the number of clients you're connected with does indeed indicate there's more cpu load congruent with network usage. So that's normal.

 You do however have a bigger concern with the data cap on your service plan. That needs to be addressed sooner than later. So either connect with less nodes, or change your traffic limit. Firstly keep an eye on how much data transfer occurs over say a few days, then you can determine how much you'll need and make adjustments from there. Keep in mind every new node that might connect with you to do a full sync will probably average you at least 44 gigabytes or more a day (depending what your upload speed is). Which is also something else you should be able to limit, Rather than the number of connections but actually slow down your upload rates

[N30]

What happened with local dogecoin?

[sukoyomi]

These words make me feel amazing "could finally see Dogecoin's highest price all of the time at the current year". Dogecoin breaks his limit again for another time, the people who holding dogecoin should be proud of this.

[PeterColumboFalk]

https://prnt.sc/xz4hi4

As seen here on my system same thing 97% cpu but only one on of my cores So it's 97% out of 400% of my cpu is being used (I have 4 cores)

How many connections do you serve with your configuration?

I have now set maxconnections to 10, and my one core load has dropped to around 50%. The totalbytessent rises fast, so I believe the the cpu load is needed to serve the connections. In this case it's nearly impossible to serve 500 connections simultaniosly.

I have a limit of 5 TByte monthly internet traffic, and try to increase it. Doge alone will fill my traffic limit quickly.

Either way unless you are using 600% of your total cpu resources, You shouldn't worry, using max % of just one core is nothing. You're way below the threshold. And changing the number of clients you're connected with does indeed indicate there's more cpu load congruent with network usage. So that's normal.

 You do however have a bigger concern with the data cap on your service plan. That needs to be addressed sooner than later. So either connect with less nodes, or change your traffic limit. Firstly keep an eye on how much data transfer occurs over say a few days, then you can determine how much you'll need and make adjustments from there. Keep in mind every new node that might connect with you to do a full sync will probably average you at least 44 gigabytes or more a day (depending what your upload speed is). Which is also something else you should be able to limit, Rather than the number of connections but actually slow down your upload rates

My hoster wants to have 65 USD for every 5 TByte of bandwidth, 1900 USD monthly for a flat, much to high in my opinion. I'm sorry, but I have stopped the doge service.

I will think about opening my home router for incoming connections, and use private computers for it. But for security reasons I have to reflect about it carefully, it will take some time.

[Piston Honda]

do not get burned buying this garbage pnd action coin!