kalexpt
Newbie
 Offline
Activity: 12
Merit: 0
|
 |
September 26, 2014, 08:31:15 AM |
|
Finally worked... burned a 500W after 30 seconds working... but I already had buying a corsair, so just need to wait for amazon to send me that lol Thank you everyone that helped  Nice, don't forget to disable power saving on usb what is that and how do I do it? I'm kind of a noob lol Sorry, i am not clear enough. I mean your windows OS power saving options, there is setting for usb suspend setting. oh that... that's done  thank you! |
|
|
|
|
|
|
|
"The nature of Bitcoin is such that once version 0.1 was released, the
core design was set in stone for the rest of its lifetime." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
Bicknellski
|
|
September 27, 2014, 03:01:44 PM |
|
 Technobit Up to 10 week delays in shipment of some customers Minion Group Buy Units. The hurt / delays continue for some customers of Technobit who have paid substantial amounts for miners over 10 weeks ago. I agree with scrappy here, Batch 1 should of been sent out by now. reading the thread its totally unprofessional sending out small orders first.
i see some people waiting 10 weeks now for there order to be shipped out and nothing. Seems people with large orders are getting shafted.
I think compensation is due MARTO!!!!
People have been patient with you since you had a problem with the boards, but this now seems to be resolved.
So what exactly is going on??
i do not what to take legal action as BFL are facing and now KNC miner, marto.
You really havent provided any updates to people with large orders on the forum at all.
Please provide a clear update on what is going on and when everyone's orders are going to be fulfilled and compensation package.
with have been patient, but you have taken are patience for granted now.
There is seriously something wrong with this thread. Folks Martin has yet to deliver batch one yet we have 3 confirmed cases of him shipping batch 2. He says "small orders" Fuck that shit. Mine may have been large and paid in fiat. I have as of to date received 6 of 50, and Marto has promised 6 shipping dates and only sent once!
Guys, enough of the bullshit.
I paid in fiat for a flat conversion, have been lied to about shipping, and seen batch 2 orders go out before mine. Check the thread, I was in page 2 and traded in 2 x3's and paid in fiat. I know I am not alone here as I have spoke to many of you in pm's. Enough with the BS, bring it.
scrappy do, dam so shipments are just trickling out. i would of thought at least batch 1 would of been completed by now
I haven't received a single one of my 88 boards. My chips have been at technobit since July 17th. Marto any news when batch 2 will be shipped, its been over a month now since you received my chips. ive emailed you on your site, 2 weeks ago and no reply. would like to know whats happening with those. you going to be offering any compensation for late deliveries now. awaiting 25 boards  and counting No offense Guyver, but he hasn't even shipped batch one out. Hopefully he will not ship out anymore batch 2 like the mistake made last week. I just got my first partial shipment today 6 of 50. I know its been over a month for you and I hate it, but it has been over 10 weeks for some of us. |
|
|
|
Profesar
Newbie
Offline
Activity: 2
Merit: 0
|
|
October 10, 2014, 01:33:24 PM |
|
Hello
today recieved from eBay Technobit HEX8A1 -240 GHs Coincraft A1 board
want to start work, but seems package not full. Missing cables, instructions.
Can someone provide me link with instruction what i need to do to start mining of bitcoin
Link plese for software download too
Link from first post not valid.
Help pls
Thx <>
|
|
|
|
|
technobitVesi
Newbie
Offline
Activity: 65
Merit: 0
|
|
October 10, 2014, 01:45:22 PM |
|
|
|
|
|
|
cryptonit
Legendary
Offline
Activity: 3038
Merit: 1053
bit.diamonds | uNiq.diamonds
|
|
October 15, 2014, 08:45:10 AM |
|
so now that watt per hashrate is the weak part of this miner
how would be ideal power saving setting
i run now 200 at 860 mvolt
its imposible go below 860mvolt then only 1 of my 5 miners would even start mining
if i cant reduce volt more will reduce miner clockrate reduce power useage and increase hashrate per watt ?
where is the sweet spot with best watt per hashrate?
example if i lower to 180 or even 150 would i get lower watt per hashrate?
i think to be able run this miners as long as possible profitable we need to find the sweet spot in power useage
|
|
|
|
cryptonit
Legendary
Offline
Activity: 3038
Merit: 1053
bit.diamonds | uNiq.diamonds
|
|
October 21, 2014, 09:29:30 AM |
|
i dont like how u leave owner of older boards standing in the rain without support that threads too.....
please again give us settings for most powerefficent watt/hashrate clockrate
|
|
|
|
technobitVesi
Newbie
Offline
Activity: 65
Merit: 0
|
|
October 21, 2014, 10:16:11 AM |
|
i dont like how u leave owner of older boards standing in the rain without support that threads too.....
please again give us settings for most powerefficent watt/hashrate clockrate
Hi, You can try lower than 200 clock setting , but it is doubtful |
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 22, 2014, 07:58:08 AM
Last edit: October 22, 2014, 04:17:07 PM by Buchi-88 |
|
Good day, i have a bought a HEX8A1 miner and i will install the miner with Bitfurys an Antminer sticks on my Pi, but yesterday i have problems with the new Cgminer: Entering directory `/usr/src/cgminer-4.7.0'
CC cgminer-cgminer.o
CC cgminer-util.o
CC cgminer-sha2.o
CC cgminer-api.o
CC cgminer-logging.o
CC cgminer-klist.o
CC cgminer-noncedup.o
CC cgminer-usbutils.o
usbutils.c: In function ‘usb_cleanup’:
usbutils.c:3826: error: ‘DRIVER_hexminera’ undeclared (first use in this function)
usbutils.c:3826: error: (Each undeclared identifier is reported only once
usbutils.c:3826: error: for each function it appears in.)
usbutils.c:3827: error: ‘DRIVER_hexminerb’ undeclared (first use in this function)
usbutils.c:3828: error: ‘DRIVER_hexminerc’ undeclared (first use in this function)
usbutils.c:3829: error: ‘DRIVER_hexmineru’ undeclared (first use in this function)
usbutils.c:3830: error: ‘DRIVER_hexminer8’ undeclared (first use in this function)
make[2]: *** [cgminer-usbutils.o] Error 1
make[2]: Leaving directory `/usr/src/cgminer-4.7.0'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/cgminer-4.7.0'
make: *** [all] Error 2 so I think the older patch is't compatible with the new Cgminer version... I hope the new commands are correct for the older Cgminer version 4.4.2?? Configuration Options Summary: libcurl(GBT+getwork).: Enabled: -lcurl curses.TUI...........: FOUND: -lncurses Antminer.S1.Bitmain..: Disabled Antminer.S2.Bitmain..: Disabled Avalon.ASICs.........: Disabled Avalon2.ASICs........: Disabled BlackArrowMinion.ASIC: Disabled BlackArrow.ASICs.....: Disabled BFL.ASICs............: Disabled BitForce.FPGAs.......: Disabled BitFury.ASICs........: Disabled Cointerra.ASICs......: Disabled Spond-sp10.ASICs.....: Disabled Spond-sp30.ASICs.....: Disabled Bitmine-A1.ASICs.....: Disabled Drillbit.BitFury.....: Disabled Hashfast.ASICs.......: Disabled Icarus.ASICs/FPGAs...: Disabled Klondike.ASICs.......: Disabled KnC.ASICs............: Disabled ModMiner.FPGAs.......: Disabled configure: error: No mining configured in THX for your help regards |
|
|
|
|
2GOOD
|
|
October 22, 2014, 09:05:06 PM |
|
Good day, i have a bought a HEX8A1 miner and i will install the miner with Bitfurys an Antminer sticks on my Pi, but yesterday i have problems with the new Cgminer: Entering directory `/usr/src/cgminer-4.7.0'
CC cgminer-cgminer.o
CC cgminer-util.o
CC cgminer-sha2.o
CC cgminer-api.o
CC cgminer-logging.o
CC cgminer-klist.o
CC cgminer-noncedup.o
CC cgminer-usbutils.o
usbutils.c: In function ‘usb_cleanup’:
usbutils.c:3826: error: ‘DRIVER_hexminera’ undeclared (first use in this function)
usbutils.c:3826: error: (Each undeclared identifier is reported only once
usbutils.c:3826: error: for each function it appears in.)
usbutils.c:3827: error: ‘DRIVER_hexminerb’ undeclared (first use in this function)
usbutils.c:3828: error: ‘DRIVER_hexminerc’ undeclared (first use in this function)
usbutils.c:3829: error: ‘DRIVER_hexmineru’ undeclared (first use in this function)
usbutils.c:3830: error: ‘DRIVER_hexminer8’ undeclared (first use in this function)
make[2]: *** [cgminer-usbutils.o] Error 1
make[2]: Leaving directory `/usr/src/cgminer-4.7.0'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/cgminer-4.7.0'
make: *** [all] Error 2 so I think the older patch is't compatible with the new Cgminer version... I hope the new commands are correct for the older Cgminer version 4.4.2?? Configuration Options Summary: libcurl(GBT+getwork).: Enabled: -lcurl curses.TUI...........: FOUND: -lncurses Antminer.S1.Bitmain..: Disabled Antminer.S2.Bitmain..: Disabled Avalon.ASICs.........: Disabled Avalon2.ASICs........: Disabled BlackArrowMinion.ASIC: Disabled BlackArrow.ASICs.....: Disabled BFL.ASICs............: Disabled BitForce.FPGAs.......: Disabled BitFury.ASICs........: Disabled Cointerra.ASICs......: Disabled Spond-sp10.ASICs.....: Disabled Spond-sp30.ASICs.....: Disabled Bitmine-A1.ASICs.....: Disabled Drillbit.BitFury.....: Disabled Hashfast.ASICs.......: Disabled Icarus.ASICs/FPGAs...: Disabled Klondike.ASICs.......: Disabled KnC.ASICs............: Disabled ModMiner.FPGAs.......: Disabled configure: error: No mining configured inTHX for your help regards Use git clone to download cgminer |
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 23, 2014, 06:13:49 AM |
|
Hello THX for your answer, you think so it's OK? Is it even possible to use the HEX8A1 with other USB Miner(Bitfury BFx2 and Antminer U2) on the same USB HUB? regards |
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
October 23, 2014, 08:18:39 AM |
|
Hello THX for your answer, you think so it's OK? Is it even possible to use the HEX8A1 with other USB Miner(Bitfury BFx2 and Antminer U2) on the same USB HUB? regards No. You need to put other miner on different usb port than hex8A1. You also need to run different cgminer, Technobit patch had no support for non technobit miner. So when you compile cgminer, only enable technobit miner you own. |
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 23, 2014, 09:34:57 AM |
|
OK thanks,
also no chance to run the Technobit (USB Port 1 on Pi) miner and the Bfx2 (USB Port 2 on Pi) Bitfury miner on one Cgminer instance?
Or I can to Cgminer instance on one Pi?
Also the only chance for one Cgminer instance is the integration from the HEX driver in the official Cgminer from choklivas?
THX
|
|
|
|
|
marto74 (OP)
|
|
October 23, 2014, 09:46:39 AM |
|
Yes you should build cgminer with our patch and the options you need for Rpi and run it
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 23, 2014, 10:40:13 AM |
|
Yes you should build cgminer with our patch and the options you need for Rpi and run it
Ok, thanks i will test it after work with these options: regards |
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
October 23, 2014, 11:24:22 AM |
|
Ok, thanks i will test it after work with these options: regards The right command is: git clone https://github.com/ckolivas/cgminer.git
|
|
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 23, 2014, 08:49:53 PM |
|
Yes you should build cgminer with our patch and the options you need for Rpi and run it
Hello, sorry but i have always the same problem? make[2]: Entering directory `/usr/src/cgminer'
CC cgminer-cgminer.o
CC cgminer-util.o
CC cgminer-sha2.o
CC cgminer-api.o
CC cgminer-logging.o
CC cgminer-klist.o
CC cgminer-noncedup.o
CC cgminer-fpgautils.o
CC cgminer-usbutils.o
CC cgminer-driver-bitfury.o
CC cgminer-driver-icarus.o
CC cgminer-driver-hexminer8.o
CCLD cgminer
cgminer-driver-bitfury.o: In function `nfu_close':
/usr/src/cgminer/driver-bitfury.c:380: undefined reference to `mcp2210_spi_cancel'
/usr/src/cgminer/driver-bitfury.c:387: undefined reference to `mcp2210_set_gpio_settings'
cgminer-driver-bitfury.o: In function `bxm_shutdown':
/usr/src/cgminer/driver-bitfury.c:593: undefined reference to `spi_clear_buf'
/usr/src/cgminer/driver-bitfury.c:594: undefined reference to `spi_add_break'
/usr/src/cgminer/driver-bitfury.c:595: undefined reference to `spi_add_fasync'
/usr/src/cgminer/driver-bitfury.c:596: undefined reference to `spi_config_reg'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:449: undefined reference to `mcp2210_get_gpio_settings'
/usr/src/cgminer/driver-bitfury.c:468: undefined reference to `mcp2210_set_gpio_settings'
/usr/src/cgminer/driver-bitfury.c:492: undefined reference to `mcp2210_spi_cancel'
cgminer-driver-bitfury.o: In function `bxm_reinit':
/usr/src/cgminer/driver-bitfury.c:754: undefined reference to `spi_clear_buf'
/usr/src/cgminer/driver-bitfury.c:755: undefined reference to `spi_add_break'
/usr/src/cgminer/driver-bitfury.c:756: undefined reference to `spi_add_fasync'
/usr/src/cgminer/driver-bitfury.c:757: undefined reference to `spi_set_freq'
/usr/src/cgminer/driver-bitfury.c:758: undefined reference to `spi_send_conf'
/usr/src/cgminer/driver-bitfury.c:759: undefined reference to `spi_send_init'
cgminer-driver-bitfury.o: In function `bxm_detect_one':
/usr/src/cgminer/driver-bitfury.c:806: undefined reference to `spi_clear_buf'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:474: undefined reference to `mcp2210_get_gpio_pindirs'
/usr/src/cgminer/driver-bitfury.c:479: undefined reference to `mcp2210_get_gpio_pinvals'
/usr/src/cgminer/driver-bitfury.c:484: undefined reference to `mcp2210_get_gpio_pindes'
cgminer-driver-bitfury.o: In function `bf1_getinfo':
/usr/src/cgminer/driver-bitfury.c:156: undefined reference to `mcp_spi_txrx'
/usr/src/cgminer/driver-bitfury.c:156: undefined reference to `ftdi_spi_txrx'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:494: undefined reference to `mcp2210_get_spi_transfer_settings'
cgminer-driver-bitfury.o: In function `nfu_set_spi_settings':
/usr/src/cgminer/driver-bitfury.c:414: undefined reference to `mcp2210_set_spi_transfer_settings'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:507: undefined reference to `mcp2210_spi_transfer'
/usr/src/cgminer/driver-bitfury.c:511: undefined reference to `mcp2210_get_gpio_pinval'
cgminer-driver-bitfury.o: In function `nfu_set_spi_settings':
/usr/src/cgminer/driver-bitfury.c:414: undefined reference to `mcp2210_set_spi_transfer_settings'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:522: undefined reference to `mcp2210_spi_transfer'
/usr/src/cgminer/driver-bitfury.c:526: undefined reference to `mcp2210_get_gpio_pinval'
cgminer-driver-bitfury.o: In function `nfu_set_spi_settings':
/usr/src/cgminer/driver-bitfury.c:414: undefined reference to `mcp2210_set_spi_transfer_settings'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:537: undefined reference to `mcp2210_spi_transfer'
/usr/src/cgminer/driver-bitfury.c:539: undefined reference to `mcp2210_get_gpio_pinval'
cgminer-driver-bitfury.o: In function `nfu_reinit':
/usr/src/cgminer/driver-bitfury.c:396: undefined reference to `spi_clear_buf'
/usr/src/cgminer/driver-bitfury.c:397: undefined reference to `spi_add_break'
/usr/src/cgminer/driver-bitfury.c:398: undefined reference to `spi_add_fasync'
/usr/src/cgminer/driver-bitfury.c:399: undefined reference to `spi_set_freq'
/usr/src/cgminer/driver-bitfury.c:400: undefined reference to `spi_send_conf'
/usr/src/cgminer/driver-bitfury.c:401: undefined reference to `spi_send_init'
/usr/src/cgminer/driver-bitfury.c:402: undefined reference to `spi_reset'
cgminer-driver-bitfury.o: In function `nfu_detect_one':
/usr/src/cgminer/driver-bitfury.c:555: undefined reference to `spi_clear_buf'
cgminer-driver-bitfury.o: In function `bitfury_check_work':
/usr/src/cgminer/driver-bitfury.c:1350: undefined reference to `libbitfury_sendHashData'
cgminer-driver-bitfury.o: In function `bf1_scan':
/usr/src/cgminer/driver-bitfury.c:1262: undefined reference to `decnonce'
/usr/src/cgminer/driver-bitfury.c:1266: undefined reference to `bitfury_checkresults'
cgminer-driver-bitfury.o: In function `bitfury_check_work':
/usr/src/cgminer/driver-bitfury.c:1344: undefined reference to `bitfury_work_to_payload'
collect2: ld returned 1 exit status
make[2]: *** [cgminer] Error 1
make[2]: Leaving directory `/usr/src/cgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/cgminer'
make: *** [all] Error 2 regards |
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 24, 2014, 11:52:25 AM |
|
Hello guys, thanks for your help, i have solved my problem I have run 2 Cgminer instances at the Pi and so runs the miners all at one Pi  I hope you can still help with the settings myself, i would run my HEX8A1 miner for tests at 200 GH/s, what settings i need? At the moment the miner runs at ~ 160 GH/s? "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "240",
"hexminer8-voltage" : "900",
"hexminer8-options" : "8:240",
"set_default_to_8" : true THX for your help |
|
|
|
|
marto74 (OP)
|
|
October 24, 2014, 12:04:33 PM |
|
Hello guys, thanks for your help, i have solved my problem I have run 2 Cgminer instances at the Pi and so runs the miners all at one Pi I hope you can still help with the settings myself, i would run my HEX8A1 miner for tests at 200 GH/s, what settings i need? At the moment the miner runs at ~ 160 GH/s? "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "240",
"hexminer8-voltage" : "900",
"hexminer8-options" : "8:240",
"set_default_to_8" : true THX for your help use 230/860 it should do 230 GHS roughly if not there might be a dead chip or not enough power |
|
|
|
Buchi-88
Legendary
Offline
Activity: 3780
Merit: 2496
|
|
October 24, 2014, 12:24:39 PM |
|
Hello guys, thanks for your help, i have solved my problem I have run 2 Cgminer instances at the Pi and so runs the miners all at one Pi I hope you can still help with the settings myself, i would run my HEX8A1 miner for tests at 200 GH/s, what settings i need? At the moment the miner runs at ~ 160 GH/s? "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "240",
"hexminer8-voltage" : "900",
"hexminer8-options" : "8:240",
"set_default_to_8" : true THX for your help use 230/860 it should do 230 GHS roughly if not there might be a dead chip or not enough power THX it's s so right: "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "230",
"hexminer8-voltage" : "860",
"hexminer8-options" : "8:230",
"set_default_to_8" : true and i only install cgminer with these commands: ./configure --enable-hexminer8 |
|
|
|
|
2GOOD
|
|
October 24, 2014, 12:36:05 PM |
|
Hello guys, thanks for your help, i have solved my problem I have run 2 Cgminer instances at the Pi and so runs the miners all at one Pi I hope you can still help with the settings myself, i would run my HEX8A1 miner for tests at 200 GH/s, what settings i need? At the moment the miner runs at ~ 160 GH/s? "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "240",
"hexminer8-voltage" : "900",
"hexminer8-options" : "8:240",
"set_default_to_8" : true THX for your help use 230/860 it should do 230 GHS roughly if not there might be a dead chip or not enough power THX it's s so right: "hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "230",
"hexminer8-voltage" : "860",
"hexminer8-options" : "8:230",
"set_default_to_8" : true and i only install cgminer with these commands: ./configure --enable-hexminer8 "hexminer8-chip-mask" : " 255", "hexminer8-voltage" : " 866", "hexminer8-options" : "8: 233", or "hexminer8-chip-mask" : " 255", "hexminer8-voltage" : " 860", "hexminer8-options" : "8: 230", It depends on the board and chips, you may have to go lower to 8:220 while leaving the voltage at 860 |
|
|
|
|
