[ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★

[onliner]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

Please add http://spaincoin.org/ !

and remove auroracoin 

where do you mine spaincoin ?
p2pool has about 30% DOA but better mine to wallet like waiting for ddosing little pools and money will be in motion

nowhere ))
but i would've been mining here, 1gh 

[1714023945]

1714023945

[1714023945]

1714023945

[1714023945]

1714023945

[1714023945]

1714023945

[kocur]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

Please add http://spaincoin.org/ !

and remove auroracoin 

where do you mine spaincoin ?
p2pool has about 30% DOA but better mine to wallet like waiting for ddosing little pools and money will be in motion

nowhere ))
but i would've been mining here, 1gh 

yep I would like too, 1gh is stable and so...finally I moved to http://x-pool.org/spa/    until 1gh add spain

[reorder]

Aurora was a major frustration, it seems like multipools get all the scrypt hashpower leaving nothing to smaller pools. We'd rather keep 1gh a pool for unique algo coins.

[nejat76]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

That doesn't seem to work. On stablehash pool it gives Ntime out of range... On 1GH un-authorized user...

ps: Haven't tested solo since wallet can't sync..

[reorder]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

That doesn't seem to work. On stablehash pool it gives Ntime out of range... On 1GH un-authorized user...

Either you did not specify vote or you use an incorrect address as username for 1gh.

[nejat76]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

That doesn't seem to work. On stablehash pool it gives Ntime out of range... On 1GH un-authorized user...

Either you did not specify vote or you use an incorrect address as username for 1gh.

Wov, thanks, it does work now!

[Bluemustang]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

Can anyone give me a hand?  I downloaded those files and when i try to run it all i get is "Cgminer is not recognized as an internal or external command, operable program of batch file."

There is no cgminer application file in any of the files listed there. 

How can i get this to work please?

Thanks.

[chryspano]

did you run "./autogen.sh --enable-heavy --enable-opencl" and then "make"?
maybe you need to run "sudo ./autogen.sh --enable-heavy --enable-opencl" and "sudo make" instead, im not sure about that"

after that you need to go to the folder and run something like "cgminer --heavy --vote 512 -o stratum+tcp://hvcpool.1gh.com:5333 -u YOUR-WALLET_ADDRESS_HERE -p x"

[Hueristic]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

Can anyone give me a hand?  I downloaded those files and when i try to run it all i get is "Cgminer is not recognized as an internal or external command, operable program of batch file."

There is no cgminer application file in any of the files listed there. 

How can i get this to work please?

Thanks.

Directions.

https://github.com/reorder/cgminer_skein/blob/503c527ad70a0569f9a15f56e5c44626e01dcdad/windows-build.txt

[tylerderden]

i'll give somebody 50000 gpu coins to make this work and post it in a zip without all the compiling bullshit. i just want working cgminer for HVC. simple easy no 2 hours of fighting with it.

[w0lf0.]

exist one hvc gpu miner for windows?

[tylerderden]

yeah if you can build it with the fucked up instructions

[w0lf0.]

yeah if you can build it with the fucked up instructions

the instructions are for linux

[xtcminer]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

Fails to start on 7850 with a segfault:

...
#14 0x00007f71b3743ca3 in ?? () from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#15 0x00007f71b3753327 in ?? () from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#16 0x00007f71b374fd7e in ?? () from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#17 0x00007f71b36f6d3e in ?? () from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#18 0x00007f71b3704338 in ?? () from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#19 0x00007f71b36e55e7 in clBuildProgram ()
   from /opt/AMDAPP/lib/x86_64/libamdocl64.so
#20 0x000000000043798c in initCl (gpu=gpu@entry=0,
    name=name@entry=0x7fff902fcf70 "Pitcairn", nameSize=nameSize@entry=256)
    at ocl.c:703
#21 0x000000000043398e in opencl_thread_prepare (thr=<optimized out>)
    at driver-opencl.c:1647
#22 0x0000000000406ad2 in main (argc=1, argv=<optimized out>) at cgminer.c:8694

Not pretending to get support, just a notification.  --skein works fine.

[darkip]

Seems the OpenCL driver doesn't like building for non-GCN cards (as reorder suggested). I imagine it might be a register use issue.

Failed to build the kernel on my 6950s but running fine on my 290x's.

PM me if you'd like a windows build for 0.1BTC.

[w0lf0.]

how can i compile the miner for windows ? 

[GordonSSS]

For the impatient, here is HVC cgminer version that works on 1gh: https://github.com/reorder/cgminer_skein

It currently only works with GCN cards (or so I believe). No binaries are available as it is a WIP, and I will not provide support for this version.

Please configure with './autogen.sh --enable-heavy --enable-opencl' and run with '--heavy --vote 1024' (or your preferred vote). Best intensity setting seems to be 3 for all cards, but you may have luck with higher values.

I'm getting 1.7Mh/s on my card. But I don't seem to be finding shares any faster than a crappy Azure VM that gets 80Kh/s, despite the Mh/s being reported by cgminer. Are you actually finding shares faster, or is there something odd about the speed reported by cgminer?

[1gh]

.....

...or we could just download it gratis from http://cryptomining-blog.com/wp-content/files/cgminer-3-7-3-heavycoin-windows.zip instead...

Thank you!

[reorder]

Here is the free and sort of 'official' windows heavy cgminer build: https://www.dropbox.com/s/dh66v8mgwuu2yv1/cgminer-heavy.zip

Still, it is beta, no support included.

[GordonSSS]

.....

...or we could just download it gratis from http://cryptomining-blog.com/wp-content/files/cgminer-3-7-3-heavycoin-windows.zip instead...

Thank you!

But do see https://bitcointalk.org/index.php?topic=392322.msg5744577#msg5744577 post. And this applies not just to the version I linked to in my other post; I compiled from source myself and get the same dubious results.