17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner

[minefarmbuy]

Tha would be me and some others  I just saw shift  in cost and will order direct from them in about 10 minutes.

You need a refund? PM me your order/invoice number and I'll get sales on it now. We're still seeing fluctuation, so be careful. Right now at $6982/bitcoin Inno's is asking for .243539 BTC roughly $1.7k.

Seems we'll be taking the conservative approach and continue to factor USD wire into our pricing for quotes, our web orders will default to wire automatically for consistency. It's nice with our model any left over funds are returned. Still, we're trying to figure out when their market calls are updating. Will update soon I hope.

[Elphamyto]

Has anyone on this forum purchased an order of these? I'm wondering what their experience with Inno's shipping is like.

[minefarmbuy]

Shipping for these unit starts mid month, so just depends in when you ordered compared to everyone else but shipping is DHL, once the order is shipped it's typically delivered in a couple days for us in the US.

[philipma1957]

Here is the deal  I decided to order from  minefarmbuy  I paid $1800 today.

I will post a review on both the gear and on  the reseller minefarmbuy.

I paid full price  on the website of minefarmbuy today.

I was pm'd this pm today

How did your T2T order work out? Sales says their still seeing 1.7k consistently from them driectly for BTC

I had them send me their a quote for the unit, looks like customs included we're charging $1732 for BTC (routed through wire) or any coin and the $1800 credit card price is sticking.

Hoping you jumped in on the $1.6k pricing that was displaying for a minute. It would be nice if they didn't gouge in shipping and offered better crypto rates. :/

I ordered 1 unit a t2 turbo I paid in full zero discounts.

My pm's back to him are as follows:

Missed it at 1.6 .  I am in the middle of a bathroom renovation got tied up and did not place the order.

I am going back to your website today and doing a cc order.

@@@@@@@@@@@@
@@@@@@@@@@@@@@@@

I just ordered from your company.

Order Number: #1000xxxx

1 T2 turbo

$1800.00

please  make sure I get it.

thanks , phil

Note no discounts full price.

I pm'd Inno_Asic

on the 31st of JULY  and was ignored.

But minefarmbuy  did not ignore me.

here is the pm to Inno_Asic

Would like to order a Turbo miner

https://bitcointalk.org/index.php?topic=3926710.msg41574375#msg41574375

https://bitcointalk.org/index.php?topic=3926710.msg42971473#msg42971473


you posted this today

https://bitcointalk.org/index.php?topic=3926710.msg43214668#msg43214668

I am willing to show how good it is compared to your T1

I do reviews on bitcoin talk  and do youtube videos on lots of miners.

I would also want to order an A10

Let me know if you can help me out to get them.

here is my email

[Redacted]

I will be doing
the Avalon 851
and the Pangolin M10

I want to add your 2 to the list.

I did do both the T1 and the B52 on my youtube channel

Thanks for your time to read this.

Since I do as many reviews as I can and  sometimes pay in full for the gear I have limits to what I can do.

this Monday I will be getting  Avalon 851's  at no cost to me I will review them.
I will be getting the T2 turbo from minefarmbuy  at full cost to me  I hope by Sept 1  to Sept 10  --- full cost was 1800
I will be getting two acorns 215+ and a x2g nest at full cost to me I hope by Oct 1-------------------- full cost was 792 I think
I will be getting pangolin/whatsminer M10 price to be determined I hope in sept.

Thanks again to minefarmbuy

[minefarmbuy]

Thanks Phil, glad to have a dedicated community member as a confirmed buyer. Now we just got to get you that T2T for your video review! 

[thehairymob]

Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.

[HagssFIN]

Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.

It is a industrial level miner device, it is mean't to be freakin' loud.

[Raymond_B]

Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.

Noise and heat, it's what makes an ASIC miner an ASIC miner

There's quite a few guides and posts on how to quiet an ASIC down, but be careful, a lot of them will make it run very hot.

[thehairymob]

Thanks I did have the S3 and was hoping it would be a little less of an ear blasting than that. Looked the web but not found anything on cooling but I am the worlds worst for finding answers from there.

[minefarmbuy]

Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.

Build box for it, some guides around here and on the web. There are some that are premade as well. Maybe ear plugs for her?

I'd post in mining support and maybe someone with great tech knowledge can help your drop fan speed but I imagine you'll want to decrease frequency as well or you'll risk buring chips or something else like your house.  

[philipma1957]

he needs a box system .

I have been lazy and not done a video on my new design.

it involves

https://www.amazon.com/Tonyko%C2%AE-Fiberglass-Fire-Blanket-39-inch/dp/B01MG8X32X/ref=sr_1_2_sspa?

https://www.homedepot.com/p/UltraTouch-48-in-x-24-ft-Radiant-Barrier-30000-11424/100661257

and a wooden diy bench much like this shape

https://www.wayfair.com/furniture/pdp/three-posts-amalfi-upholstered-storage-bench-thps1456.html

line the inside with the radiant barrier then the fiber glass blanket .

access is by opening lid

air in from a circle hole inside air exits from a hole in the side most convent for you

[-ck]

Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.

The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner.

[minefarmbuy]

The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner.

Yea, you could run off an desktop atx which is "home friendly" but the sound of 120mm's will still be loud at 30% then you're downclocking considerably.

[Raymond_B]

The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner.

Yes, I know my M3s PSUs were awful. It'd be interesting to find a way to compare just PSU DB over a range of temps and wattage.

[toptek12]

Innosilicon said they are gonna sell chips in a Youtube video, i have to find again, i wonder if they really will if they do ?,will side hack finally be able to make some high end miners for us at a lower cost then they sell them for or even boards that fit Antminer cases sense they seem cheaper and easier to get ? . or will Innosilicon pull there usually BS and charge out the ass for chips or make the chip buyer ,buy more chips then they need .

[sidehack]

I can't say whether they will or won't sell chips yet, but they're talking with me, so that's good news. I'm hopeful.

[taserz]

I can't say whether they will or won't sell chips yet, but they're talking with me, so that's good news. I'm hopeful.

Use lots of smiley faces so they have to be cheerful on every request.

[philipma1957]

Use lots of smiley faces so they have to be cheerful on every request.

Nice idea

[HagssFIN]

"Can I buy some chips? xD"

 

No but seriously, I hope that it plays out good for you Sidehack.
You're doing great job for the mining community.

[minefarmbuy]

Use lots of smiley faces so they have to be cheerful on every request.

Old sales tip: "smile through your voice".