ruining 2 gpu's without powered risers???

[ibrahim11]

Hi, I was wondering if I could run my 7950 and the 280x straight off my extreme4 970 mobo without frying it.  Is this possible?

[1713280226]

1713280226

[1713280226]

1713280226

[1713280226]

1713280226

[vm1990]

if your using x16 to x16 risers then your pretty safe with unpowerd ones

[ibrahim11]

if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???

[nachius]

Yes as long as the power supply is adequate.

[Kenshin]

if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???

Make sure you have have cooling.

[ibrahim11]

Yes as long as the power supply is adequate.

if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???

Make sure you have have cooling.

I have a 750w corasir rm.  I can use a normal desktop fan can't I?

[nachius]

Power supply should be fine.  Most mining software will let you monitor the gpu temps if they consistently push over 90*C they are getting too hot. Type of fan really doesn't matter as long as it is moving the hot air away from the cards.

[ibrahim11]

Power supply should be fine.  Most mining software will let you monitor the gpu temps if they consistently push over 90*C they are getting too hot. Type of fan really doesn't matter as long as it is moving the hot air away from the cards.

If I over clock a little will it damage the psu?

How can I monitor how much the components are asking from the psu.  I have a watt meter but that will only tell me how much the psu is using.