NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS

[eagleflies]

Hello, brand new to noble coin and I'm only lightly familiar with cryptomining in general. I've downloaded NobleCoin and I've attempted mining, but I haven't noticed any deposits so far.

A few questions:

1) I was wondering how best I can mine NOBLs?
2) Should I join a pool, and if so, what are some good pools that still work? I see a lot of dead links.
3) What is scantime?
4) How do I know when I've earned NOBLs thru mining?
5) Does anyone have any cheesecake here?

And if it helps any, my system is an i5-2500K @ 4.2 GHz with a GTX 650Ti BOOST 2GB graphics card.

Thank you all!

1. if under windows just use your wallet. I do not think it makes sense to invest lots of effort into setting up mining etc since our PoW mining will shut down in 3 weeks.
To start mining just type in console

Code:

setgenerate true 1

2. There is no pools AFAIK.
3. scantime?
4. Look at 'Recent transactions' or go to 'Transactions' and see if you mined 1000 coins.
5. Cheesecakes are overrated!

[1714054424]

1714054424

[1714054424]

1714054424

[1714054424]

1714054424

[1714054424]

1714054424

[eagleflies]

real smooth and well done so far.

Pow Mining Rewards are just a bit low imo and you need to update the Opener with some Pools.

Are there some working Pools now at all ?
Solo Mining never was my cup of tea cause i always turn my rig off  over night.

Good job anyway.
 

Thank you.

PoW is temporary until PoS is stable.
Opener - still looking for someone to edit it. Any volunteers?
Pools - if someone wants to set it up, fine. But not sure if it makes sense for 3 weeks.
Solo mining  is great. You almost feel like digging for gold in the ground

[eagleflies]

eagleflies, can you post a standalone m7m miner that works with NOBL? I can't get the mining to work other than through the GUI. Would like to run the miner externally with a m7m miner.

Thanks!

Hi there!

I do not want to spend time on this - we have just 21000 blocks to go with PoW mining. you can either compile noblecoind under linux or run GUI under windows.

[eagleflies]

Ready for the swap 

It happens tomorrow. You remember?

https://bitcointalk.org/index.php?topic=402667.0

Yes i was ready, but choosed the easy way. Luckily i did one transaction before the exchange wallets
were in maintenance, so i'm minting and mining since last night.
Really great job , you have no noble donation adress for a small tip ?

I'm happy that you're happy

Here's my address: 9acVmwMxq8nKfpvvfwtKu7Vp6xE5dhHx7o

Thank you!

That's nice , little tip should be there.

Thank you !

Cheers!

[eagleflies]

Sorry I didn't get around to paying out last night.

Latest round of payouts have been done.

Total paid out: 355000
Total entrants: 52
Remaining funds: 895062.83320647 NOBL

Today is the last day, so get your free PoS flavoured NobleCoin

http://promoplugs.com/Campaign.aspx?CID=147

Addresses that have not worked, pm me if these are yours:

X4NPbmfMUm7MC9ZKsSBTEMucXeCHaf
1E8GyrMRMPGLktvAEBL1FqmMeTcd877FX6
1FnsWXNadQWcYEt2LWELch8LCcntgUyGi6
SR9XDBAKWtYd8NddyBK4VaK2roa2VBsmmQ
9nZKZxHsJuh5nHM1AcmEhpSa7WEMNuBFj

AFAIK all noble addresses should start with 9 so the only one which looks legit is last one.

[eagleflies]

good job eagleflies

i wonder why u did choose against merge mining with magi
u could even use same reduce rewards when to much hashrate system as u use at magi
and only tiny mining rewards at noble as aux hashcoin anyway (so the pow would create additional inflation is not correct)

this way strengh noble network with magi pools and create a m7m mining family

would all have been good promotion for magi which i see as a underrated coin with great active community

but just my opinion
hybrid POW/POS in my opinion is superior to pure POS if done right

Thanks!

Well, community voted to have PoS and I understand PoS (to some extent). I do not know too much about merged mining ATM.

If we start thinking about merged mining in the future I would prefer to switch towards merge mining with litecoins. Sounds like safest option.

[harefakasinia]

are your sure this coin? i sure and like this coin.

[TN5]

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

[james6546]

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

Run CMD then cd to the folder with noblecoin-qt.exe in it then type noblecoin-qt.exe -salvagewallet

[TN5]

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

Run CMD then cd to the folder with noblecoin-qt.exe in it then type noblecoin-qt.exe -salvagewallet

Thanks! Will do this as soon as I get home.

[giantkin]

Ran the salvage command...got alot of



Noblecoin version v1.0.0.1 (1408381731)
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 03/06/15 14:04:47

Renamed wallet.dat to wallet.1425650688.bak
Salvage(aggressive) found 363 records


******* exception encountered *******


******* exception encountered *******

and a few skip keys.

Alot of   Last seen .9hrs  a few last seen at 300hrs.



wallet loads. but doesnt connect. (opened firewall) had 1 connection.

No balance.  stopped all, restarted not connecting now.

next step?

Gk
giantkin at giantkin dot com

I dont have alot of coins, but would still like to move em over
Thanks
g

[adam1230]

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

[eagleflies]

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

The important question is have you sent the money before the switch? IF afterwards it does not matter and money is still in encrypted wallet. Documentation was written before the switch and presented option of transferring money to unencrypted wallet. But now this option does not exist anymore. I have updated docs to present current options.

[eagleflies]

Ran the salvage command...got alot of



Noblecoin version v1.0.0.1 (1408381731)
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 03/06/15 14:04:47

Renamed wallet.dat to wallet.1425650688.bak
Salvage(aggressive) found 363 records


******* exception encountered *******


******* exception encountered *******

and a few skip keys.

Alot of   Last seen .9hrs  a few last seen at 300hrs.



wallet loads. but doesnt connect. (opened firewall) had 1 connection.

No balance.  stopped all, restarted not connecting now.

next step?

Gk
giantkin at giantkin dot com

I dont have alot of coins, but would still like to move em over
Thanks
g

Let me understand:

1. you had unencrypted old wallet
2. you did backup it and then copied onto new .noblecoinPOS directory
3. then you started new PoS noblecoind?
4. it does not connect? it needs to download the blockchain to show correct balance

please try to start it with 'noblecoind -addnode=104.236.195.137'

Are you under linux or windows? if windows then instead of 'noblecoind' you need to run 'noblecoin-qt'

[eagleflies]

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

I will ask fairglu to change this. Thanks!

[eagleflies]

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

I will ask fairglu to change this. Thanks!

It is stuck at block 4065.

You rock!

[fairglu]

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

TLWR: Done!

https://chainz.cryptoid.info/nobl/ is now the new PoS chain, I added a temporarily link and notice to the old chain, which is at https://chainz.cryptoid.info/noblold/

The https://chainz.cryptoid.info/nobles/ should temporarily be available and redirect to https://chainz.cryptoid.info/nobl/ until everyone updates

I'll take down the old chain in a few days.

It is stuck at block 4065.

Only for a few minutes while stuff was getting switched

[eagleflies]

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

TLWR: Done!

https://chainz.cryptoid.info/nobl/ is now the new PoS chain, I added a temporarily link and notice to the old chain, which is at https://chainz.cryptoid.info/noblold/

The https://chainz.cryptoid.info/nobles/ should temporarily be available and redirect to https://chainz.cryptoid.info/nobl/ until everyone updates

I'll take down the old chain in a few days.

It is stuck at block 4065.

Only for a few minutes while stuff was getting switched

Of course!

[TN5]

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

The important question is have you sent the money before the switch? IF afterwards it does not matter and money is still in encrypted wallet. Documentation was written before the switch and presented option of transferring money to unencrypted wallet. But now this option does not exist anymore. I have updated docs to present current options.

Yeah, I did it today. I'll try this https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys when I get home. Will report how it went.

[fairglu]

Added links in the explorer to the guide for funds transfer.

Also cleanup up the orphan chart (the spikes where due to test wallet experiments)