Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[mik_druid]

Any good pool? stratum+tcp://pool.verters.com:4444 doesnt work for me

[1713311818]

1713311818

[1713311818]

1713311818

[1713311818]

1713311818

[valsens]

the cards in sgminer  are connected ...  because i dont know what to do  , i tryed 1000 versions , i change clocks for one card and  speeds for 3 cards rise or go down , same for threadconcurrency .
i have six 7950  :1 asus (900/1250), 1 saphire dualx(900/1250), 3 saphire vaporx(850/1250) ,1 gigabyte(1000/1250) these are with stock speeds ,
please some one can help me for the best settings  .
i have win 8.1 64, drivers 14.4 ( best) , i testesd and 13.1

[lobo13hf]

the cards in sgminer  are connected ...  because i dont know what to do  , i tryed 1000 versions , i change clocks for one card and  speeds for 3 cards rise or go down , same for threadconcurrency .
i have six 7950  :1 asus (900/1250), 1 saphire dualx(900/1250), 3 saphire vaporx(850/1250) ,1 gigabyte(1000/1250) these are with stock speeds ,
please some one can help me for the best settings  .
i have win 8.1 64, drivers 14.4 ( best) , i testesd and 13.1

try 14.6 thats whats working for me.

[randywald]

the cards in sgminer  are connected ...  because i dont know what to do   , i tryed 1000 versions , i change clocks for one card and  speeds for 3 cards rise or go down , same for threadconcurrency .
i have six 7950  :1 asus (900/1250), 1 saphire dualx(900/1250), 3 saphire vaporx(850/1250) ,1 gigabyte(1000/1250) these are with stock speeds ,
please some one can help me for the best settings   .
i have win 8.1 64, drivers 14.4 ( best) , i testesd and 13.1

I have R9 290 cards, but i configured it for your 7950s. I hope it works. I'm sure all cards can handle 900 MHz so i chose 900 for all cards. Set fan to 50 percent an watch the temperatures. If over 75-78 °C i would increase fan speed. Otherwise you can use lower fan speed.

"intensity" : "18",
"worksize" : "256",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1250",
"gpu-fan" : "50",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "80",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true"

[valsens]

the cards in sgminer  are connected ...  because i dont know what to do  , i tryed 1000 versions , i change clocks for one card and  speeds for 3 cards rise or go down , same for threadconcurrency .
i have six 7950  :1 asus (900/1250), 1 saphire dualx(900/1250), 3 saphire vaporx(850/1250) ,1 gigabyte(1000/1250) these are with stock speeds ,
please some one can help me for the best settings  .
i have win 8.1 64, drivers 14.4 ( best) , i testesd and 13.1

try 14.6 thats whats working for me.

can you post a link with these drivers 14.6 modded (for 6 cards) , i'll try and the conf that posted randywald  -   thank you

[valsens]

RESULT CONF randywald:
GPU0 ASUS 837 KHS
GPU1 GIGABYTE 763 KHS -  I DONT KNOW WHY BUT DIDNT CHANGE THE CLOCK  IS 1000/1250
GPU2 DUALX 744 KHS
GPU3 VAPORX 740 KHS
GPU4 VAPORX 747 KHS
GPU5 VAPORX 746 KHS


 

[induktor]

Anyone else really excited about the switch. The time is almost here

I call it sick at job to be ready for it, i am, my miners are standing by, also purchased a couple of thousand VTC just in case 

[induktor]

Time to kick ASICs to the curb. They can have their centralization!

WELL SAID!!!!! 

[randywald]

RESULT CONF randywald:
GPU0 ASUS 837 KHS
GPU1 GIGABYTE 763 KHS -  I DONT KNOW WHY BUT DIDNT CHANGE THE CLOCK  IS 1000/1250
GPU2 DUALX 744 KHS
GPU3 VAPORX 740 KHS
GPU4 VAPORX 747 KHS
GPU5 VAPORX 746 KHS


 

What if you try this:

"gpu-engine" : "900,1000,900,850,850,850",
"memclock" : "1250,1250,1250,1250,1250,",

Or try

"gpu-engine" : "1000",
"memclock" : "1250",

And try if the cards work with this overclock. If you have the gigabyte GHZ edition with voltage lock at 1.25V, this card will do at least 1125 MHz!

[centrafuge]

Spread the word my fellow Vertans!

The Switchmas Song:

MP3 (192): https://www.dropbox.com/s/fxxl1620cm79bwh/fonyo_-_vert-switchmas_1.0.mp3?dl=0
WAV: https://www.dropbox.com/s/3hsqd0iafpxx1ll/fonyo_-_vert-switchmas_1.0.wav?dl=0

Bravo! Great to hear the muppets are on board with this!

[scratchy]

MuPool.com now running a P2Pool for the newest hash algorithm feel free to join:


http://p2vtc.mupool.com:9171/static/

Just point your Lyra2RE miner to p2vtc.mupool.com:9171 and use your Walletaddress as username!

[naplam]

CrunchPool will automatically restart and switch to Lyra2 when block 208300 comes.
0% fee for the first few weeks of Lyra2!, mine with us:
http://p2pool.crunchpool.com:9171/

[Pansyfaust]

MuPool.com now running a P2Pool for the newest hash algorithm feel free to join:


http://p2vtc.mupool.com:9171/static/

Just point your Lyra2RE miner to p2vtc.mupool.com:9171 and use your Walletaddress as username!

Dude, I use your p2p node all the time <3, please be awesome and open up a connection over port 80 for your vertcoin mining

[DragonSlayer]

Anyone else getting segmentation fault error with new Linux miner?  I have downloaded RC1 and compiled own, and both giving the error.

Thanks

[sammy007]

Any special node list for daemon?

[triplef]

getting hw errors here as well

http://prntscr.com/5g3c2a

invalid nonce

"intensity" : "17",
"worksize" : "256",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "60",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true"
}

[sammy007]

Unofficial Mac OS X Wallet: https://mega.co.nz/#!fZJnEb6Y!ApbJkgc7XiIhHti1_4boOn1ZZuDZlAD1BCnI96pR4eI

I build it on Yosemite and bundled all non-system libraries. Works for me, should work for you.

[geenius]

is there also a CPU miner for Lyra2RE?

[feeleep]

Hi,

My pool: https://www2.coinmine.pl/vtc is updated and new port is open for new algo: stratum+tcp://mine1.coinmine.pl:6360

feeleep

[geenius]

guys, I even cannot start the sgminer. what am I doing wrong? I have two AMD 280X cards and I would like to test and configure my rig for lyra2re.

sgminer.exe --kernel lyra2re -o stratum+tcp://ca.simplemulti.com:3374 -u username -p password --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 -I 13 -w 256 --gpu-dyninterval 7 --gpu-threads 2 --expiry 28 --scan-time 30 --queue 3 --gpu-memclock 1500 --gpu-powertune -20 --gpu-engine 1000 --gpu-fan 100 --gpu-vddc 1.100



Started sgminer 5.1.0
* using Jansson 2.7
clDevicesNum returned error, no GPUs usable
All devices disabled, cannot mine!



thank you

try this

{
"pools" : [
   {
      "url" : "stratum+tcp://pool.verters.com:4444",
      "user" : "xxxx.xxx",
      "pass" : "x"
   }
]
,
"xintensity" : "3",
"worksize" : "256",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-engine" : "1000",
"gpu-powertune" : "20",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "60",
"failover-switch-delay" : "60",
"gpu-platform" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30"
}

it did not work. I still have the error - "clDevicesNum returned error, no GPUs usable"