★★DigiByte|极特币★★[DGB]✔ Core v6.16.5.1 - DigiShield, DigiSpeed, Segwit

[MoparMiningLLC]

Please help. I had a wallet that I created in 2014. I deleted the qt wallet several years ago. I downloaded the latest version of the qt wallet and imported my wallet file. My DGB is there and it shows my available balance. However, I can not click on send available balance nor can I send a small amount of DGB.  It shows my available balance of over 1800+ DGB but even if I try to send 100 DGB my wallet says that  don't have enough. Does anyone have any suggestions?

has the client fully sync'd? if not, you need to allow that to happen.

Yes it has fully synced.

can you dump the private key and try to re-add it? you are the second person I know that has had an issue, theirs was a little different, they went a while without using the wallet then downloaded the new one, the wallet file had some of their transactions but not all of them - the only thing I think of for them - they had several wallet.dat files - we tried loading each and every one of them to no avail.

if you can share a snapshot of the error message.

[daworm06]

Please help. I had a wallet that I created in 2014. I deleted the qt wallet several years ago. I downloaded the latest version of the qt wallet and imported my wallet file. My DGB is there and it shows my available balance. However, I can not click on send available balance nor can I send a small amount of DGB.  It shows my available balance of over 1800+ DGB but even if I try to send 100 DGB my wallet says that  don't have enough. Does anyone have any suggestions?

has the client fully sync'd? if not, you need to allow that to happen.

Yes it has fully synced.

can you dump the private key and try to re-add it? you are the second person I know that has had an issue, theirs was a little different, they went a while without using the wallet then downloaded the new one, the wallet file had some of their transactions but not all of them - the only thing I think of for them - they had several wallet.dat files - we tried loading each and every one of them to no avail.

if you can share a snapshot of the error message.

I have posted the images below. As you can see my wallet shows an available balance. However on the send screen when I click "use available balance" nothing happens. It stays at 0. I tried to dump the private key but I'm not exactly sure how to do it. The console tells me to add my passphrase to my command but I'm not sure how to do that and Google has not been helpful.

When I type dumpprivkey "DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM" I get Error: Please enter the wallet passphrase with walletpassphrase first. (code -13)
I've tried entering passphrase but I must not be formatting it correctly. How should that command look?


https://pasteboard.co/JbrTzqL.jpg
https://pasteboard.co/JbrUslK.jpg

[MoparMiningLLC]

Please help. I had a wallet that I created in 2014. I deleted the qt wallet several years ago. I downloaded the latest version of the qt wallet and imported my wallet file. My DGB is there and it shows my available balance. However, I can not click on send available balance nor can I send a small amount of DGB.  It shows my available balance of over 1800+ DGB but even if I try to send 100 DGB my wallet says that  don't have enough. Does anyone have any suggestions?

has the client fully sync'd? if not, you need to allow that to happen.

Yes it has fully synced.

can you dump the private key and try to re-add it? you are the second person I know that has had an issue, theirs was a little different, they went a while without using the wallet then downloaded the new one, the wallet file had some of their transactions but not all of them - the only thing I think of for them - they had several wallet.dat files - we tried loading each and every one of them to no avail.

if you can share a snapshot of the error message.

I have posted the images below. As you can see my wallet shows an available balance. However on the send screen when I click "use available balance" nothing happens. It stays at 0. I tried to dump the private key but I'm not exactly sure how to do it. The console tells me to add my passphrase to my command but I'm not sure how to do that and Google has not been helpful.

When I type dumpprivkey "DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM" I get Error: Please enter the wallet passphrase with walletpassphrase first. (code -13)
I've tried entering passphrase but I must not be formatting it correctly. How should that command look?

your images did not work. and that may be the issue - if your wallet is locked (ie, you are not entering passphrase correct) that might keep you from sending any. Let me play around with mine and will see if I can get you the right syntax.

[daworm06]

Please help. I had a wallet that I created in 2014. I deleted the qt wallet several years ago. I downloaded the latest version of the qt wallet and imported my wallet file. My DGB is there and it shows my available balance. However, I can not click on send available balance nor can I send a small amount of DGB.  It shows my available balance of over 1800+ DGB but even if I try to send 100 DGB my wallet says that  don't have enough. Does anyone have any suggestions?

has the client fully sync'd? if not, you need to allow that to happen.

Yes it has fully synced.

can you dump the private key and try to re-add it? you are the second person I know that has had an issue, theirs was a little different, they went a while without using the wallet then downloaded the new one, the wallet file had some of their transactions but not all of them - the only thing I think of for them - they had several wallet.dat files - we tried loading each and every one of them to no avail.

if you can share a snapshot of the error message.

I have posted the images below. As you can see my wallet shows an available balance. However on the send screen when I click "use available balance" nothing happens. It stays at 0. I tried to dump the private key but I'm not exactly sure how to do it. The console tells me to add my passphrase to my command but I'm not sure how to do that and Google has not been helpful.

When I type dumpprivkey "DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM" I get Error: Please enter the wallet passphrase with walletpassphrase first. (code -13)
I've tried entering passphrase but I must not be formatting it correctly. How should that command look?


https://pasteboard.co/JbrTzqL.jpg
https://pasteboard.co/JbrUslK.jpg

your images did not work. and that may be the issue - if your wallet is locked (ie, you are not entering passphrase correct) that might keep you from sending any. Let me play around with mine and will see if I can get you the right syntax.

I don't get a specific error. When I manually input the amount it asked me for my password and I enter it, It then tells me that it exceeds my balance, even when I try to send 100 DGB

[MoparMiningLLC]

I don't get a specific error. When I manually input the amount it asked me for my password and I enter it, It then tells me that it exceeds my balance, even when I try to send 100 DGB

i wonder if it is simply you are getting the pw wrong. You have not used your dgb wallet since 2014 - almost 6 years - any chance you have the pw wrong?

I am going to pw protect my wallet and then try to send but with a incorrect pw and see if it says simply i am exceeding my balance or if it gives a pw error message.

and yea, I confirmed - it is not a sync issue for you.

https://explorer-1.us.digibyteservers.io/address/DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM

shows your core is 100% synced

[daworm06]

I don't get a specific error. When I manually input the amount it asked me for my password and I enter it, It then tells me that it exceeds my balance, even when I try to send 100 DGB

i wonder if it is simply you are getting the pw wrong. You have not used your dgb wallet since 2014 - almost 6 years - any chance you have the pw wrong?

I am going to pw protect my wallet and then try to send but with a incorrect pw and see if it says simply i am exceeding my balance or if it gives a pw error message.

and yea, I confirmed - it is not a sync issue for you.

https://explorer-1.us.digibyteservers.io/address/DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM

shows your core is 100% synced

I'm definitely using the right password. No question about it. I used the same PW across every QT wallet that I have  or had.

[MoparMiningLLC]

I don't get a specific error. When I manually input the amount it asked me for my password and I enter it, It then tells me that it exceeds my balance, even when I try to send 100 DGB

i wonder if it is simply you are getting the pw wrong. You have not used your dgb wallet since 2014 - almost 6 years - any chance you have the pw wrong?

I am going to pw protect my wallet and then try to send but with a incorrect pw and see if it says simply i am exceeding my balance or if it gives a pw error message.

and yea, I confirmed - it is not a sync issue for you.

https://explorer-1.us.digibyteservers.io/address/DDiMGp1Zu7SGcPAtCLbsXCQU2btaDrgKWM

shows your core is 100% synced

I'm definitely using the right password. No question about it. I used the same PW across every QT wallet that I have  or had.

hmm ok

also about the dumpprivkey command you were having an issue with. In the console, do the following first:

walletpassphrase "<your passphrase>" 600

then do the

dumpprivkey <dgbaddress>

copy the private key - close the core wallet.

copy the wallet.dat file and store elsewhere. then delete the one in dgb folder so that when you open core wallet it will create a new one.

once you are back in and sync'd

open console and use

importprivkey <your private key>

and see if it will import your addresses and then allow you to spend your dgb.

DO NOT DELETE the original wallet.dat file until you are sure the new wallet.dat file correctly imported the priv key.

[HeitorMessias]

DGB in 2020 enter in the top 10 coins in marketcap 

[BestCrytpEX]

Hi,
I m trying to sync my wallet core but I have only one active seed.
Where can I find a list of current active nodes or a conf file plz

Thanks guys

[pinpins]

 
You can mine Digibyte at autoexchange mining pool Zergpool.com at 0.5% fee. Please use following commands for different mining options
 
Option 1 Auto coin switch mining by profitability within algorithm with autoexchange to specified coin wallet(BTC in example below)

Code:

  -o stratum+tcp://qubit.mine.zergpool.com:4733 -u <YOURBTCWALLET> -p c=BTC

Option 2 Direct coin mining with payout to coin wallet

Code:

  -o stratum+tcp://qubit.mine.zergpool.com:4733 -u <YOURDGBWALLET> -p c=DGB,mc=DGB

Option 3 Direct coin mining with autoexchange to specified coin wallet(BTC in example below)

Code:

  -o stratum+tcp://qubit.mine.zergpool.com:4733 -u <YOURBTCWALLET> -p c=BTC,mc=DGB

Please note mc stands for mining coin symbol, c stand for payout coin symbol

Autoexchange to BTC, LTC, DASH, BCH, DOGE or any other currency we mine
Happy mining,
 cheers pinpin

[gartmah]

DigiByte video interviews with LearnCrypto, 204 issue with the latest news and updates on the project
https://www.youtube.com/watch?v=AfLLmctRtJE&feature=youtu.be

[Shy Ronnie]

Listing on LBank on July 9
https://coindar.org/en/event/digibyte-dgb-listing-on-lbank-29444

[R-J-F]

DGB in 2020 enter in the top 10 coins in marketcap 

Everything is possible, especially  after the listing on Binance.  Odocrypt algo finally made this coin into the sight of big investors and Binance will help them to fill their portfolio, praying for such scenario.

Been with DGB since they started. I like the direction now, good things are happening.

[Cyplyakox]

DigiByte Update 209 Released on YouTube https://www.youtube.com/watch?v=TwbwvEv7th0&feature=youtu.be
And also DigiTracker version 2.0 started working with the DigiByte ticker and its screenshots are already in the twitter https://twitter.com/APS_DGB/status/1281541195727015936?s=20

[Sincere_]

DGB in 2020 enter in the top 10 coins in marketcap 

They have a really great track record and Dgb is getting an increase in attention now been rising consistently for a few moths but to get into the top 10 they will need more than what’s going on now.

[BryanPark626]

Please visit GitHub for the latest DigiByte release: https://github.com/digibyte/digibyte/releases

This thread is no longer actively monitored by dev team as the majority of the community has moved to Telegram, find more here: https://www.digibyte.io/digibyte-community

where are my free digybite coins

D71Z5tnUGp4JeWBS9eoK44sDYuVuiKibMU

[Kopiev]

Binance exchange made an announcement on the listing of new trading pairs on July 20, the DGB / USDT pair was also added to this list https://www.binance.com/en/support/articles/fee761e58d684bc3a1c7fc11660ab596

[arjuna BTC]

Binance exchange made an announcement on the listing of new trading pairs on July 20, the DGB / USDT pair was also added to this list https://www.binance.com/en/support/articles/fee761e58d684bc3a1c7fc11660ab596

and digibyte in the list of new trading pair too
https://twitter.com/DigiByteCoin/status/1285146997301882881
i hope this will be good for DGB

[seven.71]

Binance exchange made an announcement on the listing of new trading pairs on July 20, the DGB / USDT pair was also added to this list https://www.binance.com/en/support/articles/fee761e58d684bc3a1c7fc11660ab596

and digibyte in the list of new trading pair too
https://twitter.com/DigiByteCoin/status/1285146997301882881
i hope this will be good for DGB

what's with DGB the day went up very high and i don't know the cause?
can anyone explain this besides the DGB / USDT pair pair listing

[bunterfisch]

DGB is now listed on unnamed.exchange
https://www.unnamed.exchange/Exchange?market=DGB_BTC