CryptoDredge 0.8.0 — NVIDIA GPU Miner [obsolete]

[Johnjay06]

Anyone compared to coolminer for lyra2z yet?

[1713940434]

1713940434

[1713940434]

1713940434

[Johnjay06]

Did a small test. My 6 1080tis run around 21.5 mh on coolminer. I was sitting at 22.5 with cryptodredge with the same settings. Only thing, is that my Temps were around 8 degrees Celsius hotter with cryptodredge. Settings are 80% +75 core - 502 on mem with 21 intensity. Hope it helps

[JackIT]

Lyra2z - Head to Head test of CoolMiner 1.3 Vs CryptoDredge 0.4.1

Hash rate numbers are vanity metrics and can be gamed.  The only thing I care about is "which miner puts more coins in my wallet?" I've done dozens of Head to Head tests in the past see: https://bitcointalk.org/index.php?topic=3385643.0

I've decided to test CoolMiner 1.3 Vs CryptoDredge 0.4.1 to see which one mines more coins on Lyra2z.


MINERS:
CoolMiner 1.3 intensity = 20
CryptoDredge 0.4.1 intensity = 6

The Setup:
I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible.
Each mining instance is running at the same time on the same machine mining on the same pool.

Overclock settings: 100% TDP, NO overclocking
Drivers: Nvidia 398.11


Test 1 Results: Test aborted

about 4 hours into the test, the rig crashed. I'm confident that it was due to CryptoDredge, the rig had close to two weeks of uptime running Coolminer.
When I went to restart CryptoDredge, I got the following error: > Error: bad lexical cast: source type value could not be interpreted as target

Given the increased temps, increased power draw, and stability issues; I cannot recommend CryptoDredge, even if it does provide a few percentage point gain over Coolminer.
I'll wait until CryptoDredge has the bugs worked out to give it another try

• [CoolMiner 1.3]  - Pool Link
• [CryptoDredge 0.4.1]  - - Pool Link

Notes on CryptoDredge:

• GPU's run about 6-8 degrees Celcius hotter than with coolminer
• The GPU count starts at 0, whereas ccminer variants start the count at 1. this obviously makes a difference when using the -d flag
• Intensity ranges from 0 to 6, 1080Ti defaults to a 6
• I initially had issues with stability. The miner would crash the rig after a minute or two of running. I had 397 drivers on the rig, which I knew caused issues for some miners. So I DDU'd the rig, installed 398 drivers, and didn't overclock... that seemed to clear up the problem.
• No API support

[Johnjay06]

Why you think such a heat difference?

[kerzNOberz]

Would love if you could test t-rex (https://bitcointalk.org/index.php?topic=4432704.0) vs Crypto Dredge. I think t-rex is a little faster, but no Windows version yet so maybe it's not possible with your setup. Thanks JackIT

[Boba_Fett]

Good perfs in L2Z but high power consumption

With 6 x 1080Ti PL 80% GPU +100 RAM +0

CryptoDredge : 22.1 Mhs - 1340W
Ccminer Tpruvot : 20.3 Mhs - 980W

[kukucumber]

тeпepь бы пoд linux дoждaтьcя

[cryptodredge]

We launched the bug tracking system, feel free to report issues

Create New Ticket
View Active Tickets

[sandinthebones]

waiting for linux version

[_javier_]

Still having problems at Nicehash on a multi gpu rig.. one device start to hash, while the others idle.

[Mikanoshi]

Hashrates are way better, yes, but not everyone are mining on specialized farms...
Intensity does nothing, so even on zero very noticeable UI slowdowns.
Any chance for the real low intensity?

[sereupin]

hello.. it will be possible to have the parameter of difficult for to set up a fixed value ?   es:  d=256

[preda]

HI DEV THANK YOU VERY MUCH FOR LYRA2Z i was looking forward to try it!!! Your miner is the best in all crypto world!!!! Here some results with lyra2z and 1060 3gb





Lyra2v2 does 29mh with 1060 3gb


Can you make a linux version so i can use with hiveos or smos thanks!!!

[cryptodredge]

REMINDER

Bug writing guidelines:

• OS
• GPUs (specific models)
• Driver version
• Overclocking parameters (core, mem, voltage)
• Watchdog, monitoring app
• Screenshot or log
• Pool
• Algo

[oserega1974]

Hello, thank you for the program, it makes good progress, but for the algorithm lyra2z with video cards 1080 ti it works worse than any program existing now.
temperature is 10-15 degrees higher than the other miner, the consumption of electricity is higher by 25%
there are errors and overloading of the miner.
I think you will fix it soon, thank you, you are doing good

[Frankie001]

Can't remember what speed my cards ran on lyra2z but the total hash was 7.6-7.8 mhs, on your miner it's definitely improved, it's now on +9 mhs, gtx 1070 = 2.1mhs and gtx 1060 6gb = 1.3 mhs

[principino1984]

1080ti 2012MHz core clock and -500mhz mem
coolMiner 3500Khs and 132W
CryptoDrege 3800khs and 187,5W

Good performance but still better coolMiner, with this wattage we should reach 4300khs more ore less.

Great job anyway, can't wait to get new versions

Marco

[oserega1974]

please tell me what intensity to put for 1080ti algo lyra2z

[luckydoky]

Is it possible to add block found and difficulty ?

[sans]

cant correct (with show hashrate and show accept) add to awersomeminer farms - no api support (better compatible with ccminer or other popular miners). yes its have more hashrate,but w/o full control == 0