NM92
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 03, 2014, 11:17:16 PM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
|
|
|
|
FreePls
|
|
February 03, 2014, 11:18:44 PM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
gpu on metiscoin? wtf.. how big is the different compared to cpu then?
|
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 03, 2014, 11:47:23 PM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
Probably yes. This is an OpenCL miner, so it works on virtually any GPU (And also with some CPUs). Just try it out and report the results.
|
Advertise Here - PM for more info!
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 03, 2014, 11:49:48 PM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
gpu on metiscoin? wtf.. how big is the different compared to cpu then? Well, I was expecting people would report performance here. For now the only i know is amd 6970 runs at 4700 kh/s (could be 5300 if i figure out a way around those 0x8000 cycles, maybe tomorrow)
|
Advertise Here - PM for more info!
|
|
|
pttx
Newbie
Offline
Activity: 47
Merit: 0
|
|
February 03, 2014, 11:59:35 PM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
gpu on metiscoin? wtf.. how big is the different compared to cpu then? Well, I was expecting people would report performance here. For now the only i know is amd 6970 runs at 4700 kh/s (could be 5300 if i figure out a way around those 0x8000 cycles, maybe tomorrow) I think there is a bug with the readout? My hashrate keeps decreasing from 45,000khash (6x R9 290) down to 400khash.. Shave value on ypool stays the same though.
|
|
|
|
crocko
|
|
February 04, 2014, 12:04:45 AM |
|
Hi !
This coin worth something ? I mean BTC / LTC ? There is an exchange for MTC to check the price ?
|
Find my posts helpful? Click my Trust link and rep me!
BTC: 1MqUxoDQE8Q88sDvoaLMbBJSMToSfPgKSy | | DOGE: D61Na9wjuneAn9GFLRNrHgWHHFwVfd1T7y | | LTC: 3Luo136zrqkCi53jT72FEY52GbwW1ZYi6X |
|
|
|
coinerjoe
|
|
February 04, 2014, 12:35:03 AM |
|
yeah swisscex.com and price plummeted prob cause of all the extra hashing power that came on
|
|
|
|
maccd1
Newbie
Offline
Activity: 42
Merit: 0
|
|
February 04, 2014, 12:44:29 AM |
|
Check the kHash/s, it's moving UP, while Workers is going down, and I'm reading in chinese QQ groups everyone is moving to mine it with GPU
|
|
|
|
kuperis
|
|
February 04, 2014, 12:51:38 AM |
|
very good price to BUY. i think is fair enough for 0.0003-0.0007 until this coin moves forward, to major exchange markets. so im still buying.. i got some 1100 for 0.00051 BTC . i think is good lottery tickets
|
|
|
|
NM92
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 04, 2014, 12:52:33 AM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
Probably yes. This is an OpenCL miner, so it works on virtually any GPU (And also with some CPUs). Just try it out and report the results. well i just opened, and it's stuck at "initializing device", i left it for a while hoping it would start sometime but it's still there, any idea why ?
|
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 04, 2014, 12:55:39 AM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
gpu on metiscoin? wtf.. how big is the different compared to cpu then? Well, I was expecting people would report performance here. For now the only i know is amd 6970 runs at 4700 kh/s (could be 5300 if i figure out a way around those 0x8000 cycles, maybe tomorrow) I think there is a bug with the readout? My hashrate keeps decreasing from 45,000khash (6x R9 290) down to 400khash.. Shave value on ypool stays the same though. The quick fix that i applied today made me reduce the worksize from 0x80000 to 0x8000, which will introduce a HUUUUGE latency in faster cards. I'm working on a solution for this just about now.
|
Advertise Here - PM for more info!
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 04, 2014, 12:57:09 AM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
Probably yes. This is an OpenCL miner, so it works on virtually any GPU (And also with some CPUs). Just try it out and report the results. well i just opened, and it's stuck at "initializing device", i left it for a while hoping it would start sometime but it's still there, any idea why ? The code for the hashes is quite complex, so it takes a lot of time to compile on some cards (specially AMD). I had to wait up to 20 minutes on one of the test machines...
|
Advertise Here - PM for more info!
|
|
|
NM92
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 04, 2014, 12:59:02 AM |
|
i have a Nvidia GTX 560 SSC, can it be used with this gpu miner ?
Probably yes. This is an OpenCL miner, so it works on virtually any GPU (And also with some CPUs). Just try it out and report the results. well i just opened, and it's stuck at "initializing device", i left it for a while hoping it would start sometime but it's still there, any idea why ? The code for the hashes is quite complex, so it takes a lot of time to compile on some cards (specially AMD). I had to wait up to 20 minutes on one of the test machines... yep, you're right, right about now it says initialized and it's connecting to server, i'll tell you how it goes in a while
|
|
|
|
gigawatt
|
|
February 04, 2014, 01:26:14 AM |
|
Looks like there error message for the "-f" parameter accidentally calls it "-d".
The OpenCL code looks based on the SPH implementation. Is that the case?
|
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 04, 2014, 01:39:57 AM |
|
Looks like there error message for the "-f" parameter accidentally calls it "-d".
The OpenCL code looks based on the SPH implementation. Is that the case?
sorry, i changed -d to -f to use -d for "device", but forgot the error. About the code, it is a "pruned" SPH code (removed all that was not used, removed all possible forks and loops, etc). I tried the reference implementation for shavite (the slower one) but could not make it compatible with the code from xptminer/SPH (for some reason hashes were always different, no matter what i did, even the "init" held different initial values). So i just gave up on other implementations and assumed they had changed something in the SPH for metiscoin. Metis "looks" vaguely like "fugue", but after the lack of success with shavite i didn't even try to use another implementation.
|
Advertise Here - PM for more info!
|
|
|
relm9
|
|
February 04, 2014, 01:42:03 AM |
|
I'm getting ~14200kH/s on two 7970s although the reported hash rate goes down to like <4000kH after a few mins of running. That said, the reported shares on ypool stay around 726.9121 /h so it seems to be working correctly regardless. Nice work
|
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 04, 2014, 01:58:05 AM |
|
I'm getting ~14200kH/s on two 7970s although the reported hash rate goes down to like <4000kH after a few mins of running. That said, the reported shares on ypool stay around 726.9121 /h so it seems to be working correctly regardless. Nice work hum, might be some integer overflow. I don't think the original xptminer was intended to run that fast
|
Advertise Here - PM for more info!
|
|
|
girino
Legendary
Offline
Activity: 2296
Merit: 1170
Advertise Here - PM for more info!
|
|
February 04, 2014, 02:01:40 AM |
|
The quick fix that i applied today made me reduce the worksize from 0x80000 to 0x8000, which will introduce a HUUUUGE latency in faster cards. I'm working on a solution for this just about now.
Ok, NEW VERSION OF GPU MINER RELEASED! Fixed the "0x8000" worksize, so the speed drops might stop for now, and should be a little bit faster! Linux and Mac OSX binaries also available! (Windows, of course, still available). Download link: https://www.dropbox.com/sh/2wv2awwgebpdo0m/STzOU5tlXasource code: https://github.com/girino/xptMinerHope you enjoy!
|
Advertise Here - PM for more info!
|
|
|
NM92
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 04, 2014, 02:51:42 AM |
|
The quick fix that i applied today made me reduce the worksize from 0x80000 to 0x8000, which will introduce a HUUUUGE latency in faster cards. I'm working on a solution for this just about now.
Ok, NEW VERSION OF GPU MINER RELEASED! Fixed the "0x8000" worksize, so the speed drops might stop for now, and should be a little bit faster! Linux and Mac OSX binaries also available! (Windows, of course, still available). Download link: https://www.dropbox.com/sh/2wv2awwgebpdo0m/STzOU5tlXasource code: https://github.com/girino/xptMinerHope you enjoy! well, i left this open for quite a while now. The gpu is already initialized, and now it says "connected to server using x.pushtrough xpt protocol". But it reports no activity, it's frozen there. Is this supposed to take that long too ? thanks and sorry for the insistance, i just want to know if i am doing sth wrong.
|
|
|
|
brm763
Newbie
Offline
Activity: 27
Merit: 0
|
|
February 04, 2014, 03:06:34 AM |
|
The quick fix that i applied today made me reduce the worksize from 0x80000 to 0x8000, which will introduce a HUUUUGE latency in faster cards. I'm working on a solution for this just about now.
Ok, NEW VERSION OF GPU MINER RELEASED! Fixed the "0x8000" worksize, so the speed drops might stop for now, and should be a little bit faster! Linux and Mac OSX binaries also available! (Windows, of course, still available). Download link: https://www.dropbox.com/sh/2wv2awwgebpdo0m/STzOU5tlXasource code: https://github.com/girino/xptMinerHope you enjoy! I have tried using OS X, Windows and Linux. Everything is going great. Thank you!
|
|
|
|
|