prometheianz
Member
Offline
Activity: 95
Merit: 10
|
|
June 26, 2014, 07:07:41 AM Last edit: June 28, 2014, 12:51:05 AM by prometheianz |
|
EDIT: Forgot to mention this BIN file is for 7950 or 280X cards, haven't tried it with any others! If you're on 14.4 drivers and don't want the hassle of going to 14.6, just download this guys BIN file (I had to modify the BIN filename from 8192 to 8191 as that's the TC I use). I've got a 20% boost overall: https://bitcointalk.org/index.php?topic=658975.msg7419294#msg7419294
|
|
|
|
jedimstr
|
|
June 26, 2014, 11:30:25 AM |
|
Holy Crap! Thanks for that!! Boosted my 4x 7950 rig from 11.4MHs to around 14.77MHs!!! Hopefully it'll be stable with low rejects, but only time will tell...
|
|
|
|
fenomenhaa
|
|
June 26, 2014, 05:05:17 PM |
|
Hey guys, I made a post in the sgminer thread about a crazy frustrating problem I am having with setting up x11 on my rig. I'd figure I'd post it here also as I'm offering a 0.015 BTC bounty for anyone who fixes problem! Here it is: Hey guys, here is a pic of sgminer when it freezes. In this instance it froze @ around 14 minutes into mining. It will do this randomly from 10 minutes in to 2 1/2 hours in. I get those two messages when sgminer crashes everytime! "Stratum connection to Pool 0 interrupted" and the last one "Pool 0 difficultly changed to 0.160". Windows does not crash and I can easily restart sgminer. This is definitely not an internet problem. As I said before I ran scrypt mining on this same machine for months without problem. Longest uptime was 2 months straight without rebooting or crashing cgminer! To double check I ran cgminer with scrypt when I was @ work and all was well when I got home. Booted up x11 and the pic above happened. Boot with a config file or just a .bat... doesn't make a difference, both crash. More information on my setup for those looking to help: 2 R9 290s (Gigabyte and ASUS), 2 R9 270s (ASUS), and 1 MSI R9 270x -- 4 GB of ram. I am running windows 8.1 currently with the 13.12 AMD drivers. I am literally pulling my hair out cause I have no solution to this problem! I don't know what I could change in the config to help this... lowered intensity, fiddled with the clocks -- all which did not help. I have a 2nd small rig with a 5850 and 270x upstairs thats hashes x11 fine and hasn't crashed since I started it... I'm going nuts! Big fat 0.015 BTC to anyone that can get me running stable! lower gpu-engine on all card (just a 100Mhz lower than the normal) and start mining, if it's stable just add 10Mhz to one card and wait, when it will crash lower it and go with the next card. That what solved my problem with crashing X11. İ have the same problem,did you find any solution İn my farm just 2 of my rigs have this problem in same network, i changed the pool and one of the problem rig is no problem for 1 week in this pool but with waffle again same problem...
|
▄▄█▄█▄[/color] ▄▀▀▀▄ ██ ██ ▄▀▀▀▄ █ █▀▀[color=#2C97
|
|
|
kevjay7
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 26, 2014, 06:37:19 PM |
|
I'm new to X11 mining. From sgminer perspective, my hashrate is very consistent. However, the graph in wafflepool is all over the place. Is this normal? https://i.imgur.com/6Mkvkn1.jpg
|
|
|
|
haploid23
Legendary
Offline
Activity: 812
Merit: 1002
|
|
June 26, 2014, 06:56:57 PM |
|
I'm still currently using GPUs mining on scrypt also, and I want to switch to x11. I'm using sgminer 4.0. Can I easily make the switch over by pointing to the new wafflepool port, or would I have to download new mining software? Any quick tips on starting x11 is greatly appreciated. Or can someone link a thread to get started with x11 mining, so that I don't junk up this thread?
|
|
|
|
chadwickx16
|
|
June 26, 2014, 08:07:50 PM |
|
I'm still currently using GPUs mining on scrypt also, and I want to switch to x11. I'm using sgminer 4.0. Can I easily make the switch over by pointing to the new wafflepool port, or would I have to download new mining software? Any quick tips on starting x11 is greatly appreciated. Or can someone link a thread to get started with x11 mining, so that I don't junk up this thread?
You will need to download sgminer-sph for X11, 14.6 Beta Drivers from AMD and djm's sgminer mod for the best hashrate possible. What OS are you running? Feel free to ask if you have any questions. I'm new to X11 mining. From sgminer perspective, my hashrate is very consistent. However, the graph in wafflepool is all over the place. Is this normal?
My graph is similar, you will get higher ups and downs if you set your difficulty higher, because of more variance.
|
|
|
|
Neo.op
|
|
June 26, 2014, 08:32:30 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
|
LYR | ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█████ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▄█████▓▓▓▓▓▓▓▓█████▄ ▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▓▄▄▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓███▄▓▓████▓███ ▓▓▓▓▓▓▓▓▓██████▄▓▓█████ ▓▓▓▓▓▓▓▓█████████▄▓███ ▓▓▓▓▓▓▓██████▀▓███▄▓█ ▓▓▓▓▓▓██████▓▓▓█████ ▓▓▓▓▓██████▓▓▓▓█████ ▓▓▓▓██████▄▄▄▄▄██████ ▓▓▓██████████████████ ▓▓███████████████████ ▓██████▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓▓█████ | LYRA Loyalty Rewards on Blockchain
══════════════════════[ Main Features ]══════════════════════ ✓Customizable tokens ███✓NFT███ ✓DeFi███ ✓DEX███ ✓Revenue share | | | |
|
|
|
chadwickx16
|
|
June 26, 2014, 08:35:19 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
Make sure you copy paste the address, but it should take too long. How long have you been waiting?
|
|
|
|
Neo.op
|
|
June 26, 2014, 08:38:00 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
Make sure you copy paste the address, but it should take too long. How long have you been waiting? not long enough I guess. 5 minutes or so. Anyone any ideas on profit pool for mining x11? I mean hourly/daily approx pay?
|
LYR | ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█████ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▄█████▓▓▓▓▓▓▓▓█████▄ ▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▓▄▄▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓███▄▓▓████▓███ ▓▓▓▓▓▓▓▓▓██████▄▓▓█████ ▓▓▓▓▓▓▓▓█████████▄▓███ ▓▓▓▓▓▓▓██████▀▓███▄▓█ ▓▓▓▓▓▓██████▓▓▓█████ ▓▓▓▓▓██████▓▓▓▓█████ ▓▓▓▓██████▄▄▄▄▄██████ ▓▓▓██████████████████ ▓▓███████████████████ ▓██████▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓▓█████ | LYRA Loyalty Rewards on Blockchain
══════════════════════[ Main Features ]══════════════════════ ✓Customizable tokens ███✓NFT███ ✓DeFi███ ✓DEX███ ✓Revenue share | | | |
|
|
|
chadwickx16
|
|
June 26, 2014, 08:41:40 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
Make sure you copy paste the address, but it should take too long. How long have you been waiting? not long enough I guess. 5 minutes or so. Anyone any ideas on profit pool for mining x11? I mean hourly/daily approx pay? You can find your info for your own miners at wafflepoolmonitor.com and they have an android app. I've averaged .0005/MH yesterday at waffle.
|
|
|
|
Neo.op
|
|
June 26, 2014, 08:42:56 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
Make sure you copy paste the address, but it should take too long. How long have you been waiting? not long enough I guess. 5 minutes or so. Anyone any ideas on profit pool for mining x11? I mean hourly/daily approx pay? You can find your info for your own miners at wafflepoolmonitor.com and they have an android app. I've averaged .0005/MH yesterday at waffle. and how much did you earn if you dont mind me asking.
|
LYR | ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█████ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓███ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▄█████▓▓▓▓▓▓▓▓█████▄ ▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓▓▄▄▓████▓▓▓▓████ ▓▓▓▓▓▓▓▓▓▓███▄▓▓████▓███ ▓▓▓▓▓▓▓▓▓██████▄▓▓█████ ▓▓▓▓▓▓▓▓█████████▄▓███ ▓▓▓▓▓▓▓██████▀▓███▄▓█ ▓▓▓▓▓▓██████▓▓▓█████ ▓▓▓▓▓██████▓▓▓▓█████ ▓▓▓▓██████▄▄▄▄▄██████ ▓▓▓██████████████████ ▓▓███████████████████ ▓██████▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓█████ ██████▓▓▓▓▓▓▓▓▓▓▓▓█████ | LYRA Loyalty Rewards on Blockchain
══════════════════════[ Main Features ]══════════════════════ ✓Customizable tokens ███✓NFT███ ✓DeFi███ ✓DEX███ ✓Revenue share | | | |
|
|
|
chadwickx16
|
|
June 26, 2014, 08:45:10 PM |
|
Does it take a lot of time for the miners to show up on wafflepool? I have started the miner but the pool still says address not found.
Make sure you copy paste the address, but it should take too long. How long have you been waiting? not long enough I guess. 5 minutes or so. Anyone any ideas on profit pool for mining x11? I mean hourly/daily approx pay? You can find your info for your own miners at wafflepoolmonitor.com and they have an android app. I've averaged .0005/MH yesterday at waffle. and how much did you earn if you dont mind me asking. Well, at Waffle I made .025 BTC, but I had some rentals too.
|
|
|
|
haploid23
Legendary
Offline
Activity: 812
Merit: 1002
|
|
June 26, 2014, 09:56:04 PM |
|
I'm still currently using GPUs mining on scrypt also, and I want to switch to x11. I'm using sgminer 4.0. Can I easily make the switch over by pointing to the new wafflepool port, or would I have to download new mining software? Any quick tips on starting x11 is greatly appreciated. Or can someone link a thread to get started with x11 mining, so that I don't junk up this thread?
You will need to download sgminer-sph for X11, 14.6 Beta Drivers from AMD and djm's sgminer mod for the best hashrate possible. What OS are you running? Feel free to ask if you have any questions. I'm running win7 64bit. I did a little digging around and found some relevant threads for anyone else in the same boat as me: sgminer-sph https://bitcointalk.org/index.php?topic=475795.014.6 catalyst beta: http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspxSo where is djm's sgminer mod? Also, would I have to retune my GPU's or can they still use the same overclocks and undervolting? Can you please link to a newb guide for starting x11? I really don't want to junk up this thread with basic questions about switching scrypt -> x11 on this same pool.
|
|
|
|
nem2k
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2014, 10:00:59 PM |
|
anyone know what happened to wafflestats?
|
|
|
|
forcefedvr6
Member
Offline
Activity: 101
Merit: 10
|
|
June 27, 2014, 12:12:45 AM |
|
Holy Crap! Thanks for that!! Boosted my 4x 7950 rig from 11.4MHs to around 14.77MHs!!! Hopefully it'll be stable with low rejects, but only time will tell... Hmm, glad that it worked for you guys. I tried that both with lasys and the "14.6fixed" miners, didn't see an increase on my 7950s though. I think that it might be a problem with win8.1 and the 14.4 drivers because I noticed that I actually lost about . 1Mh per card after "upgrading" from win8 to 8.1 and running 14.4 modded driver (I have six cards) and lazys miner like I had been.
|
|
|
|
prometheianz
Member
Offline
Activity: 95
Merit: 10
|
|
June 27, 2014, 12:19:19 AM |
|
Hmm, glad that it worked for you guys. I tried that both with lasys and the "14.6fixed" miners, didn't see an increase on my 7950s though.
I think that it might be a problem with win8.1 and the 14.4 drivers because I noticed that I actually lost about . 1Mh per card after "upgrading" from win8 to 8.1 and running 14.4 modded driver (I have six cards) and lazys miner like I had been.
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file. I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500. How much are you getting currently?
|
|
|
|
induktor
|
|
June 27, 2014, 12:25:50 AM |
|
Since we are talking about it. I am doing about 4 MH per card in X11 using sph-sgminer at 1000Mhz clock (R9 280X), using 4 threads worsize 128, is this considered good? driver is 14.4 windows 7 - 64 (i am trying to make it work in linux but no sucess yet). I get 3.5 MH per card in X13 same machine same cards, same settings.
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
forcefedvr6
Member
Offline
Activity: 101
Merit: 10
|
|
June 27, 2014, 12:51:39 AM |
|
Hmm, glad that it worked for you guys. I tried that both with lasys and the "14.6fixed" miners, didn't see an increase on my 7950s though.
I think that it might be a problem with win8.1 and the 14.4 drivers because I noticed that I actually lost about . 1Mh per card after "upgrading" from win8 to 8.1 and running 14.4 modded driver (I have six cards) and lazys miner like I had been.
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file. I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500. How much are you getting currently? I'm seeing about 2.89 Mh/s per 7950 card (sapphire hd7950 non-reference) running win8.1, 14.4 modded driver, and lasy x11 miner. (Was seeing ~2.99 with win8 before I "upgraded".) I put the .bin file in my miner folder and didn't really change anything though, so I tried a different miner with the new .bin and still saw about 2.89per card. I wonder if the lasy x11/x13 build is better than the x11 one. I might have to run it to see, but I'm thinking that either one handles x11 the same.
|
|
|
|
jedimstr
|
|
June 27, 2014, 01:15:10 AM |
|
Hmm, glad that it worked for you guys. I tried that both with lasys and the "14.6fixed" miners, didn't see an increase on my 7950s though.
I think that it might be a problem with win8.1 and the 14.4 drivers because I noticed that I actually lost about . 1Mh per card after "upgrading" from win8 to 8.1 and running 14.4 modded driver (I have six cards) and lazys miner like I had been.
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file. I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500. How much are you getting currently? I'm seeing about 2.89 Mh/s per 7950 card (sapphire hd7950 non-reference) running win8.1, 14.4 modded driver, and lasy x11 miner. (Was seeing ~2.99 with win8 before I "upgraded".) I put the .bin file in my miner folder and didn't really change anything though, so I tried a different miner with the new .bin and still saw about 2.89per card. I wonder if the lasy x11/x13 build is better than the x11 one. I might have to run it to see, but I'm thinking that either one handles x11 the same. What's your WSize and TC set at? Per the name of the bin, you need to be set at 256 and 8192 respectively for it to work with that bin.
|
|
|
|
forcefedvr6
Member
Offline
Activity: 101
Merit: 10
|
|
June 27, 2014, 01:32:49 AM |
|
Hmm, glad that it worked for you guys. I tried that both with lasys and the "14.6fixed" miners, didn't see an increase on my 7950s though.
I think that it might be a problem with win8.1 and the 14.4 drivers because I noticed that I actually lost about . 1Mh per card after "upgrading" from win8 to 8.1 and running 14.4 modded driver (I have six cards) and lazys miner like I had been.
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file. I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500. How much are you getting currently? I'm seeing about 2.89 Mh/s per 7950 card (sapphire hd7950 non-reference) running win8.1, 14.4 modded driver, and lasy x11 miner. (Was seeing ~2.99 with win8 before I "upgraded".) I put the .bin file in my miner folder and didn't really change anything though, so I tried a different miner with the new .bin and still saw about 2.89per card. I wonder if the lasy x11/x13 build is better than the x11 one. I might have to run it to see, but I'm thinking that either one handles x11 the same. What's your WSize and TC set at? Per the name of the bin, you need to be set at 256 and 8192 respectively for it to work with that bin. Interesting, I will give that a shot. Worksize was set at 256 but TC was 23,xxx , and then I deleted TC because I didn't think that it was necessary with these x11 miners. I'll try out what you are saying a little later though.
|
|
|
|
|