[ANN] BitenX [BTENX] [X11 | POW/MASTERNODE | Privatepay - Instapay] [Biten Swap]

[igrek_boy]

masternode port 44445 is wrong. Error.

[1713994240]

1713994240

[1713994240]

1713994240

[1713994240]

1713994240

[1713994240]

1713994240

[Dynamine]

 My wallet says 'No Block Source'.. any solutions?

Also, what pool has the most miners?

[Biten]

masternode port 44445 is wrong. Error.

If you are making masternode with windows wallet then try to use 66666

My wallet says 'No Block Source'.. any solutions?

Also, what pool has the most miners?

Add some addnodes from:

http://explorer.bitenx.net/network

[igrek_boy]

masternode port 44445 is wrong. Error.

If you are making masternode with windows wallet then try to use 66666

no. error again

https://image.ibb.co/iFQ7Co/btenx2.png

[Biten]

masternode port 44445 is wrong. Error.

If you are making masternode with windows wallet then try to use 66666

no. error again

https://image.ibb.co/iFQ7Co/btenx2.png

Try to put your localhost ip (127.0.0.1) in your masternode.conf

[igrek_boy]

Try to put your localhost ip (127.0.0.1) in your masternode.conf

I tried to do it. same error. give me please conf files

[SERGEY TARAEV]

i`ve send  btenx from exchange to my btenx wallet. After 7 hour no confirmations. what`s going on now??
txid   7c1021c3ea53ba2a0c3ed4339289ff475b0a9b63353737dab88fd8baf676e1de
txid   fe11e2028ded1725135f1e50232b56fc66aa9adf5c9b28dd7d47b29aeb2eee65,

the first trial transaction was very fast 1 min
txid   e02c631af27e32d8913cdebcb585203757029d71b5c2ab2c785cd6b16e7f5fa1

BitenX is digital currency that helps you to make transactions with anyone in the world directly, privately and instantly,
making your payments cheaper by removing the expense or need for a middleman like a bank or a payment provider.

[tshirtnewcoin]

  Tshirt BitenX coin. For fans of BitenX coin 

https://teespring.com/tshirt-bitenx-coin#pid=2&cid=2122&sid=front

[Biten]

i`ve send  btenx from exchange to my btenx wallet. After 7 hour no confirmations. what`s going on now??
txid   7c1021c3ea53ba2a0c3ed4339289ff475b0a9b63353737dab88fd8baf676e1de
txid   fe11e2028ded1725135f1e50232b56fc66aa9adf5c9b28dd7d47b29aeb2eee65,

the first trial transaction was very fast 1 min
txid   e02c631af27e32d8913cdebcb585203757029d71b5c2ab2c785cd6b16e7f5fa1

BitenX is digital currency that helps you to make transactions with anyone in the world directly, privately and instantly,
making your payments cheaper by removing the expense or need for a middleman like a bank or a payment provider.

We need more miners to make these transactions faster, instant transactions will be available when masternodes are up.

[Live.me]

Do you have a plan to get listed in other exchange ? both exchange are who listing BitenX are very bad, I even just found out now and I also do not know both exchange are secure ?

[Biten]

Do you have a plan to get listed in other exchange ? both exchange are who listing BitenX are very bad, I even just found out now and I also do not know both exchange are secure ?

Yes as soon swap is fully done, we are setting up our main exchange also.

[igrek_boy]

dev give please bitenx.conf and masternode.conf
masternodes with port 44445, 66666, 1130 etc don`t work

[Biten]

dev give please bitenx.conf and masternode.conf
masternodes with port 44445, 66666, 1130 etc don`t work

We have setup masternode only on linux vps without windows wallet.Since you need VPS also when you are setting up masternode with windows wallet it's better if you do everything on VPS.
1. Setup and start wallet daemon
2. Generate MN1 address and send 5000 to that address from your wallet
3. Follow instructions from the guide
- Generate MN private key on VPS
- Get masternode output from your wallet
- Edit bitenx.conf and masternode.conf
- Encrypt wallet
- Start wallet daemon (bitenxd)
- Check if masternode works (bitenx-cli get masternode status)
https://i.imgur.com/HRhOF3q.png

This masternode is made following guide we posted.

[Live.me]

Do you have a plan to get listed in other exchange ? both exchange are who listing BitenX are very bad, I even just found out now and I also do not know both exchange are secure ?

Yes as soon swap is fully done, we are setting up our main exchange also.

Ok Cool, At least that a reason why i'm still continue for mining, Just a suggestion I think would be good if BitenX get listing in cryptopia, only hope isn't it

[canonical]

I can't get a masternode to start. In the controller wallet, it will start and show PRE_ENABLED, but it won't ENABLE. In the remote masternode, it won't show that the masternode has been started which means that the signal is not propagating on the network. It will just give ""Not capable masternode: Masternode not in masternode list".

Even when I started the masternode in the controller wallet, it didn't propagate the annoucement onto the network. Check "masternode list". There's nothing there, so you're masternode isn't being broadcast.

I've set up many masternodes before and I just can't get this one working.

Advice, dev?

We have setup masternode only on linux vps without windows wallet.Since you need VPS also when you are setting up masternode with windows wallet it's better if you do everything on VPS.
1. Setup and start wallet daemon
2. Generate MN1 address and send 5000 to that address from your wallet
3. Follow instructions from the guide
- Generate MN private key on VPS
- Get masternode output from your wallet
- Edit bitenx.conf and masternode.conf
- Encrypt wallet
- Start wallet daemon (bitenxd)
- Check if masternode works (bitenx-cli get masternode status)


This masternode is made following guide we posted.

[Biten]

I can't get a masternode to start. In the controller wallet, it will start and show PRE_ENABLED, but it won't ENABLE. In the remote masternode, it won't show that the masternode has been started which means that the signal is not propagating on the network. It will just give ""Not capable masternode: Masternode not in masternode list".

Even when I started the masternode in the controller wallet, it didn't propagate the annoucement onto the network. Check "masternode list". There's nothing there, so you're masternode isn't being broadcast.

I've set up many masternodes before and I just can't get this one working.

Advice, dev?

We have setup masternode only on linux vps without windows wallet.Since you need VPS also when you are setting up masternode with windows wallet it's better if you do everything on VPS.
1. Setup and start wallet daemon
2. Generate MN1 address and send 5000 to that address from your wallet
3. Follow instructions from the guide
- Generate MN private key on VPS
- Get masternode output from your wallet
- Edit bitenx.conf and masternode.conf
- Encrypt wallet
- Start wallet daemon (bitenxd)
- Check if masternode works (bitenx-cli get masternode status)
https://i.imgur.com/HRhOF3q.png

This masternode is made following guide we posted.

I don't know what you are doing wrong I setup masternode with guide I wrote above and when type masternode list I get this:

https://i.imgur.com/8cWeUeU.png

It synced in few minutes and now it's working.
Disable IPV6
Do you have ports open for 44445?
Do you have blockchain fully synced?
Do you have walletpassphrase?

[canonical]

Yes, I've done all of those things. Here's the problem: If I do `masternode list` on a node which doesn't have a masternode, I don't get anything returned. So, the masternode might be showing on your node, but it isn't being propagated across the network. Try it yourself, set up another node, let it sync and then try `masternode list`. See if you get anything returned or if your list is empty.

When I do a `masternode list`, I don't see the masternode that you show in your screenshot.

Also, the masternode that you set up; have you received any rewards on it?

Also, if this is a fork of Dash, do we need sentinel?

I can't get a masternode to start. In the controller wallet, it will start and show PRE_ENABLED, but it won't ENABLE. In the remote masternode, it won't show that the masternode has been started which means that the signal is not propagating on the network. It will just give ""Not capable masternode: Masternode not in masternode list".

Even when I started the masternode in the controller wallet, it didn't propagate the annoucement onto the network. Check "masternode list". There's nothing there, so you're masternode isn't being broadcast.

I've set up many masternodes before and I just can't get this one working.

Advice, dev?

We have setup masternode only on linux vps without windows wallet.Since you need VPS also when you are setting up masternode with windows wallet it's better if you do everything on VPS.
1. Setup and start wallet daemon
2. Generate MN1 address and send 5000 to that address from your wallet
3. Follow instructions from the guide
- Generate MN private key on VPS
- Get masternode output from your wallet
- Edit bitenx.conf and masternode.conf
- Encrypt wallet
- Start wallet daemon (bitenxd)
- Check if masternode works (bitenx-cli get masternode status)


This masternode is made following guide we posted.

I don't know what you are doing wrong I setup masternode with guide I wrote above and when type masternode list I get this:



It synced in few minutes and now it's working.
Disable IPV6
Do you have ports open for 44445?
Do you have blockchain fully synced?
Do you have walletpassphrase?

[canonical]

Also, the problem with biten swap still exists. It's still adding on a commission and not allow a trade to go through.

[kurbeks]

same here.

[Biten]

Insufficient funds bug fixed.

Masternode guide updated