T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[morticio777]

Hey guys, is this the best nvidia miner? I've been mining for a some time now, but never with nvidia. As I read in other threads, with T-Rex miner there are not that many stale/ incorrect shares?

For Octopus yes, by far

[1713580445]

1713580445

[1713580445]

1713580445

[1713580445]

1713580445

[VVoutje]

Any support for RTX 4ooo cards?

what rtx4000 cards are you talking about?

Nvidia quadro, used for video editing and some medical applications

In a RTX4000 you will find a TU104 processor and GDR6 memory, the same processor you will find on a RTX2080 also using GDR6 memory. So I thought T-REX should work here as well or doesn't it?

Are you using actual drivers "R460 U3 (461.40)" ?

Are you using t-rex-0.19.10(cuda10.0) or t-rex-0.19.10(cuda11.1) ?

Prefer to use t-rex-0.19.10(cuda11.1) on Turing processors, it will support the newest one.

Let us know how it's going, I'm rather curious about this.

[kluuppo]

Hi, newly started miner here. Using my 2x 2080ti gaming rig to mine eth with t-rex. I'm facing an issue with utilization of gpu #0, it gives only 1-3MH/s, whereas the other dishes out 50-60 MH/s. I tried couple of other miners as well, with same results. On afterburner it tells me that GPU1 (#0) is having 'no load limit' active. I am at loss here, where should I look or what should I try? It seems strange that it works, but only slowly. Thanks for any help.

Code:

20210210 20:50:09 Mining at eu1.ethermine.org:4444, diff: 4.00 G
20210210 20:50:09 ethash epoch: 394, block: 11830491, diff: 4.00 G
20210210 20:50:09 GPU #0: ASUS RTX 2080 Ti - 2089.34 kH/s, [T:30C, P: 44W, F:30%, E:49kH/W], 0/0 R:0%
20210210 20:50:09 GPU #1: ASUS RTX 2080 Ti -   50.43 MH/s, [T:42C, P:216W, F:36%, E:235kH/W], 2/2 R:0%
20210210 20:50:09 Hashrate: 52.52 MH/s, Shares/min: 2 (Avr. 1.157), Avr.P: 258W, Avr.E: 204kH/W
20210210 20:50:09 Uptime: 2 mins 43 secs | Algo: ethash | T-Rex v0.19.10

Answering to myself: flashing back to original BIOS from an OC one fixed this for me, now ~60MH/s each.

[b-double-u]

NEWB

What is the best way to set up the environment?

I have a few Dell Servers, like a rack full, that I was going to switch on and have them chug away. Is it better to do that and use the same config across all of them or use some of the Tower servers and put like 3 video cards in each of them?

I also have a bunch of TTbit (usb) miners that someone gave me. Are they even worth turning on?

Thanks from the newB!

[tbmc]

Hey guys

(mining ethereum, ethermine pool)

I'm just switched from Phoenixminer to T-Rex (on every rig) can someone help me how can I display the actual share difficulty as Phoenixminer does?

Are there any recommended commands to use (like some plus information about the GPU-s)?

Thanks for your answer in advance!

[sirbrokealot]

Hi,

is there a log option with T-rex?

My rig is crashing after couple of hours operating fine.

Also can you set the OC settings by the miner batch file itself?

[joseph32]

Hey,

I have a rig with mixed GTX 1xxx cards. Today I have put 2 RTX 3070 into that rig. But T-Rex wont run. No matter if I try to run only some cards (like all the 1070 or 1080...), or all together, or only the old ones, or just the 3070. Even if I only put one 3070 in there or switch the sockets, there is always the same error.

Tried also with 0.19.5 and 0.19.11, with cuda 10.0 and 11.1., with admin and without, with and without the --no-nvml tag and with older 457.51 driver and the newer 461.40. Its a Win 10 pro 2004 version. The error I get is:

With both cards enabled:
> 20210215 22:06:58 ERROR: Can't start miner, can't pair device with KEY 000e00 [GPU #6, dom:0, bus:e, slot:0], failed to get handler of GPU nvml_id=350e75db36d696834d658e638e62f489: error code 999

Just one card:
> 20210215 22:29:32 ERROR: Can't start miner, can't pair device with KEY 000d00 [GPU #5, dom:0, bus:d, slot:0], failed to get handler of GPU nvml_id=8d88412b26e66b4ca70c342a6a9bbf2e: error code 999

All other rigs are fine with RTX 3080 and 3090 only cards. But I never mixed different generations. I also have not tested if I get the same error when I mix RTX 2xxx with the 3070. But maybe you already know what this can be. Other miners like the G** and L** dont have this problem and running fine, but I dont want to use them. So I think its some bug or whatever in your miner when mixing up generations.

Can you solve this somehow? Thanks!

EDIT: I just tested the 3070 card(s) in an RTX 2xxx system with Win 10 Pro 2004 and the newest 2H20 including older and newest nVidia drivers and got the same error:
> 20210216 10:32:57 ERROR: Can't start miner, can't pair device with KEY 000400 [GPU #1, dom:0, bus:4, slot:0], failed to get handler of GPU nvml_id=8d88412b26e66b4ca70c342a6a9bbf2e: error code 999

It doesn't matter if I try to start the 3070 alone or any other card, or all together, T-Rex wont run and just give this error. But all other miners have no problem in any combination. Is it possible that your miner doesn't know what to do with a 3070? In some different systems I have no problem with 3080 and 3090 cards, its just that 3070 cards... Strange

[Llevellyn]

Got this error today:
Error at hooking API ''LoadStringA''
Dumping first 32 bytes:
...
before today everything worked fine.
Running on win10 with 1660 card

[sirbrokealot]

Hey,

I have a rig with mixed GTX 1xxx cards. Today I have put 2 RTX 3070 into that rig. But T-Rex wont run. No matter if I try to run only some cards (like all the 1070 or 1080...), or all together, or only the old ones, or just the 3070. Even if I only put one 3070 in there or switch the sockets, there is always the same error.

Tried also with 0.19.5 and 0.19.11, with cuda 10.0 and 11.1., with admin and without, with and without the --no-nvml tag and with older 457.51 driver and the newer 461.40. Its a Win 10 pro 2004 version. The error I get is:

With both cards enabled:
> 20210215 22:06:58 ERROR: Can't start miner, can't pair device with KEY 000e00 [GPU #6, dom:0, bus:e, slot:0], failed to get handler of GPU nvml_id=350e75db36d696834d658e638e62f489: error code 999

Just one card:
> 20210215 22:29:32 ERROR: Can't start miner, can't pair device with KEY 000d00 [GPU #5, dom:0, bus:d, slot:0], failed to get handler of GPU nvml_id=8d88412b26e66b4ca70c342a6a9bbf2e: error code 999

All other rigs are fine with RTX 3080 and 3090 only cards. But I never mixed different generations. I also have not tested if I get the same error when I mix RTX 2xxx with the 3070. But maybe you already know what this can be. Other miners like the G** and L** dont have this problem and running fine, but I dont want to use them. So I think its some bug or whatever in your miner when mixing up generations.

Can you solve this somehow? Thanks!

EDIT: I just tested the 3070 card(s) in an RTX 2xxx system with Win 10 Pro 2004 and the newest 2H20 including older and newest nVidia drivers and got the same error:
> 20210216 10:32:57 ERROR: Can't start miner, can't pair device with KEY 000400 [GPU #1, dom:0, bus:4, slot:0], failed to get handler of GPU nvml_id=8d88412b26e66b4ca70c342a6a9bbf2e: error code 999

It doesn't matter if I try to start the 3070 alone or any other card, or all together, T-Rex wont run and just give this error. But all other miners have no problem in any combination. Is it possible that your miner doesn't know what to do with a 3070? In some different systems I have no problem with 3080 and 3090 cards, its just that 3070 cards... Strange

I ran 1070 2070 and 3080 in a single rig.
Also the 3070s work great...

[Akyboy]

hi Guys,

I just registered and this forum looks confusing to me am i able to search only this thread? )

Anyway - i downloaded trex, but both Kaspersky and windows defender are deleting files as infected.
Should i be concerned?

[bigslimvdub]

hi Guys,

I just registered and this forum looks confusing to me am i able to search only this thread? )

Anyway - i downloaded trex, but both Kaspersky and windows defender are deleting files as infected.
Should i be concerned?

Create a folder on your desktop and then add scan exceptions to that folder from both antivirus and then download to that folder and you will be fine.

[infsina]

Hi,

Can somebody explain what does 13/13 R:0% at the end means in the output window, I shared below?

I wonder what this is saying and why there is two different output for gpu's: one says 13/13 and the other 4/4.

Thank you.

https://drive.google.com/file/d/1Q8MZQhul2GFQFT_WCR-KwEtK-w3vr2eU/view?usp=sharing

[tbearhere]

Hey T-Rex, could add support for suprnova's RVN pool please ?

Here's a .bat example:

t-rex -a kawpow -o stratum+tcp://rvn.suprnova.cc:8888 -u RBX1G6nYDMHVtyaZiQWySMZw1Bb2DEDpT8.rig -p x


Thank you !

bumping this again, I also opened a pull request on github amd wrote in your discord but no one is answering

I agree ..... T-Rex should give you some support. How about it T-Rex? 

[ocminer]

Hey T-Rex, could add support for suprnova's RVN pool please ?

Here's a .bat example:

t-rex -a kawpow -o stratum+tcp://rvn.suprnova.cc:8888 -u RBX1G6nYDMHVtyaZiQWySMZw1Bb2DEDpT8.rig -p x


Thank you !

bumping this again, I also opened a pull request on github amd wrote in your discord but no one is answering

I agree ..... T-Rex should give you some support. How about it T-Rex? 

I'm already saying "Hello" daily in Discord ... no reply yet :-(

[Dr.Cupido]

Hi,

Can somebody explain what does 13/13 R:0% at the end means in the output window, I shared below?

I wonder what this is saying and why there is two different output for gpu's: one says 13/13 and the other 4/4.

Thank you.

https://drive.google.com/file/d/1Q8MZQhul2GFQFT_WCR-KwEtK-w3vr2eU/view?usp=sharing

submitted/accepted shares R = rejected shares %

what settings do you use for your cards ?

https://abload.de/img/3070h0jx2.png

PL 46% +100Core/+1200mem 65%Fan

[Akyboy]

hi Guys,

I just registered and this forum looks confusing to me am i able to search only this thread? )

Anyway - i downloaded trex, but both Kaspersky and windows defender are deleting files as infected.
Should i be concerned?

Create a folder on your desktop and then add scan exceptions to that folder from both antivirus and then download to that folder and you will be fine.

Thanks alot!

Iv been reading this thread since i registered yesterday and i find it interesting that no much support is given by devs. compared to competitors miners.
Hope i am wrong but i am little worried about this miner!

[infsina]

Hi,

Can somebody explain what does 13/13 R:0% at the end means in the output window, I shared below?

I wonder what this is saying and why there is two different output for gpu's: one says 13/13 and the other 4/4.

Thank you.

https://drive.google.com/file/d/1Q8MZQhul2GFQFT_WCR-KwEtK-w3vr2eU/view?usp=sharing

submitted/accepted shares R = rejected shares %

what settings do you use for your cards ?

https://abload.de/img/3070h0jx2.png

PL 46% +100Core/+1200mem 65%Fan

Thank you for your answer. I have shared an image but it cannot be seen I guess. Let me try again

https://abload.de/img/capture26kd1.png

[maXonja]

Thanks alot!

Iv been reading this thread since i registered yesterday and i find it interesting that no much support is given by devs. compared to competitors miners.
Hope i am wrong but i am little worried about this miner!

You are wrong dude

[mohamad123sh]

hello everyone

today i have a problem with my mining rig

all of my graphic cards is 1060 6GB

when abou after 12hours mining , it hashrate droped to 3.4mh/s   sometimes to 1.5 mh/s

before that , my hashrate is about 21.5mh/s per cards

whats is wrong??
 

[parker423]

Hello,

whats the difference from Cuda 10 or Cuda 11.1?
What should I use for Ethereum?

Thanks