T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[trexminer]

Actual h\r on pool side is indeed 50% of reported.

It's a known problem that only occurs when mining on nanopool, we're looking into it. Mining on other pools is unaffected.

as follows, up to 50% of the rejects on nicehash

Which version? If 0.21.2, could you upload the log file?

[1713859400]

1713859400

[1713859400]

1713859400

[1713859400]

1713859400

[1713859400]

1713859400

[ultrashot]

hello i got this error when t-rex restarted

ernel: [61101.636943][T24530] mpool_observer[24530]: segfault at a3 ip 000000000050a9ed sp 00007f4c26ffc4d0 error 4 in t-rex[400000+1891000]
Jul 10 10:40:15 kelinci kernel: [61101.636955][T24530] Code: c4 30 5b 5d 41 5c 41 5d 41 5e c3 66 90 4c 8d 77 30 89 4c 24 0c 89 34 24 4c 89 f7 e8 ed bf ef ff 48 8b 3b 8b 34 24 8b 4c 24 0c <80> bf a3 00 00 00 00 49 89 f9 0f 85 8b 00 00 00 84 c9 0f 84 26 01
Jul 10 10:40:19 kelinci kernel: [61105.043536][T25366] DTS: killing sk:00000000a8226e9c (127.0.0.1:58186 -> 127.0.0.1:4059) state 6
Jul 10 10:40:19 kelinci kernel: [61105.043539][T25366] DTS: killing sk:00000000556a53a0 (127.0.0.1:58190 -> 127.0.0.1:4059) state 6
Jul 10 10:40:19 kelinci kernel: [61105.043540][T25366] DTS: killing sk:00000000f6e6380a (127.0.0.1:58174 -> 127.0.0.1:4059) state 6
Jul 10 10:40:19 kelinci kernel: [61105.043542][T25366] DTS: killing sk:000000001330665f (127.0.0.1:58182 -> 127.0.0.1:4059) state 6
Jul 10 10:40:19 kelinci kernel: [61105.043543][T25366] DTS: killing sk:00000000faa6e06d (127.0.0.1:58178 -> 127.0.0.1:4059) state 6

can anyone help me pls

[angelbbs]

Actual h\r on pool side is indeed 50% of reported.

It's a known problem that only occurs when mining on nanopool, we're looking into it. Mining on other pools is unaffected.

as follows, up to 50% of the rejects on nicehash

Which version? If 0.21.2, could you upload the log file?

Code:

20210709 19:49:34.171[784846.400] -OUT-> {"id":216934401,"method":"mining.submit","params":["*************.*************","00000000db3e4a50","33dd6bb444","00000000","108a8e33dd6bb444"],"worker":"Farm2"}
20210709 19:49:34.327[784846.552] <-IN-66-0 {"id":216934401,"result":false,"error":[1,"Share above target."]}
20210709 19:49:34.437[784846.656] [FAIL] 1158/1163 - Share above target., 255ms ... GPU #1
20210709 19:49:34.437[784846.660] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a50 for block 528488
20210709 19:49:40.614[784852.835] -OUT-> {"id":218581763,"method":"mining.submit","params":["*************.****************","00000000db3e4a50","9a584ea21c","00000000","108a8e9a584ea21c"],"worker":"Farm2"}
20210709 19:49:40.802[784853.032] <-IN-66-0 {"id":218581763,"result":false,"error":[1,"Share above target."]}
20210709 19:49:40.864[784853.093] [FAIL] 1158/1164 - Share above target., 257ms ... GPU #3
20210709 19:49:40.864[784853.096] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a50 for block 528488
20210709 19:49:41.722[784853.954] <-IN-229-0 {"id":null,"method":"mining.notify","params":["00000000db3e4a51",528488,"b7de423bd2296543770a31e637a70b4782fc01d9dd52211e3a06ff4e53e7f58d","","",2,"41157205394722105456231126733432809649589828953424482219666653390575","",false]}
20210709 19:49:41.816[784854.038] GOT NEW WORK job_id=00000000db3e4a51, old: job_id=00000000db3e4a50
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=1, GPU #1]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=4, GPU #4]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=2, GPU #2]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=3, GPU #3]: job_id=00000000db3e4a51
20210709 19:49:41.940[784854.173] WARN: New iteration find nonces for device [ID=0, GPU #0]: job_id=00000000db3e4a51
20210709 19:49:53.594[784865.814] -OUT-> {"id":221904387,"method":"mining.submit","params":["*************.****************","00000000db3e4a51","99beb24d00","00000000","108a8e99beb24d00"],"worker":"Farm2"}
20210709 19:49:53.734[784865.965] <-IN-66-0 {"id":221904387,"result":false,"error":[1,"Share above target."]}
20210709 19:49:53.828[784866.057] [FAIL] 1158/1165 - Share above target., 243ms ... GPU #3
20210709 19:49:53.828[784866.061] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a51 for block 528488
20210709 19:49:55.512[784867.734] -OUT-> {"id":222395649,"method":"mining.submit","params":["*************.*************","00000000db3e4a51","335e6ed01c","00000000","108a8e335e6ed01c"],"worker":"Farm2"}
20210709 19:49:55.653[784867.886] <-IN-66-0 {"id":222395649,"result":false,"error":[1,"Share above target."]}
20210709 19:49:55.762[784867.995] [FAIL] 1158/1166 - Share above target., 261ms ... GPU #1
20210709 19:49:55.778[784867.999] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a51 for block 528488

[spike42]

Just updated to 0.21.2 and now displayed memory junction temp is very high and does not correspond to any of my sensors. Any idea?
https://i.ibb.co/gJhVm1n/image.png

Also, Windows Defender is now reporting T-Rex as a PUP. Just thought you'd want to know.

[nik-qz]

Just updated to 0.21.2 and now displayed memory junction temp is very high and does not correspond to any of my sensors. Any idea?

even if the sensor is lying, your video card is not energy efficient
usual parameters in the batch file , example --lock-cclock 1140 --mclock 1000

[Anton Ivar]

page markup is shifted
https://hostingkartinok.com/show-image.php?id=7580238ad51643d87abeb4b8b08a86b1

[trexminer]

page markup is shifted

We're revamping the webUI at the moment, so should be able to fix it then. For now, you'd need to either disable share validation (to get rid of "I" metric), or widen your browser window to avoid wrapping.

[trexminer]

Actual h\r on pool side is indeed 50% of reported.

It's a known problem that only occurs when mining on nanopool, we're looking into it. Mining on other pools is unaffected.

as follows, up to 50% of the rejects on nicehash

Which version? If 0.21.2, could you upload the log file?

Code:

20210709 19:49:34.171[784846.400] -OUT-> {"id":216934401,"method":"mining.submit","params":["*************.*************","00000000db3e4a50","33dd6bb444","00000000","108a8e33dd6bb444"],"worker":"Farm2"}
20210709 19:49:34.327[784846.552] <-IN-66-0 {"id":216934401,"result":false,"error":[1,"Share above target."]}
20210709 19:49:34.437[784846.656] [FAIL] 1158/1163 - Share above target., 255ms ... GPU #1
20210709 19:49:34.437[784846.660] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a50 for block 528488
20210709 19:49:40.614[784852.835] -OUT-> {"id":218581763,"method":"mining.submit","params":["*************.****************","00000000db3e4a50","9a584ea21c","00000000","108a8e9a584ea21c"],"worker":"Farm2"}
20210709 19:49:40.802[784853.032] <-IN-66-0 {"id":218581763,"result":false,"error":[1,"Share above target."]}
20210709 19:49:40.864[784853.093] [FAIL] 1158/1164 - Share above target., 257ms ... GPU #3
20210709 19:49:40.864[784853.096] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a50 for block 528488
20210709 19:49:41.722[784853.954] <-IN-229-0 {"id":null,"method":"mining.notify","params":["00000000db3e4a51",528488,"b7de423bd2296543770a31e637a70b4782fc01d9dd52211e3a06ff4e53e7f58d","","",2,"41157205394722105456231126733432809649589828953424482219666653390575","",false]}
20210709 19:49:41.816[784854.038] GOT NEW WORK job_id=00000000db3e4a51, old: job_id=00000000db3e4a50
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=1, GPU #1]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=4, GPU #4]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=2, GPU #2]: job_id=00000000db3e4a51
20210709 19:49:41.909[784854.129] WARN: New iteration find nonces for device [ID=3, GPU #3]: job_id=00000000db3e4a51
20210709 19:49:41.940[784854.173] WARN: New iteration find nonces for device [ID=0, GPU #0]: job_id=00000000db3e4a51
20210709 19:49:53.594[784865.814] -OUT-> {"id":221904387,"method":"mining.submit","params":["*************.****************","00000000db3e4a51","99beb24d00","00000000","108a8e99beb24d00"],"worker":"Farm2"}
20210709 19:49:53.734[784865.965] <-IN-66-0 {"id":221904387,"result":false,"error":[1,"Share above target."]}
20210709 19:49:53.828[784866.057] [FAIL] 1158/1165 - Share above target., 243ms ... GPU #3
20210709 19:49:53.828[784866.061] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a51 for block 528488
20210709 19:49:55.512[784867.734] -OUT-> {"id":222395649,"method":"mining.submit","params":["*************.*************","00000000db3e4a51","335e6ed01c","00000000","108a8e335e6ed01c"],"worker":"Farm2"}
20210709 19:49:55.653[784867.886] <-IN-66-0 {"id":222395649,"result":false,"error":[1,"Share above target."]}
20210709 19:49:55.762[784867.995] [FAIL] 1158/1166 - Share above target., 261ms ... GPU #1
20210709 19:49:55.778[784867.999] autolykos.eu-north.nicehash.com:3390 asks job 00000000db3e4a51 for block 528488

Thanks. This should be fixed now (see version 0.21.4).

[Divinity666]

(autolykos2) Minor performance improvements (mainly Pascal GPUs)

I got like 0.1% h\r increasement on 1080ti)))

[trexminer]

(autolykos2) Minor performance improvements (mainly Pascal GPUs)

I got like 0.1% h\r increasement on 1080ti)))

It varies for different models. Should be ~2-3% for 1060.

[Timi33]

Hi guys,

Hope you are fine.

Sorry if it has already been asked, but i'm looking for a free tool to monitor computers on same lan mining with t-rex on windows.
i can access api via http and can NAT it to access it remotly but cannot regroup all my rig in one place.
I have a lot of computer and would like to regroup in one UI (for instance zabbix, grafana or others) to be able to see if one of them has a trouble.
I'm multi mining on those computers (chia farming, xmr, and eth).
I've found https://github.com/lennykean/MiningMonitor but doesn't seem to work or i don't know how to do it.

Sorry for my english i'm frenchy.

Thank you for your help

Regards
Tim

[Divinity666]

Please fix --tfan behavior when t° is too low it would spin to 100%

[trexminer]

Please fix --tfan behavior when t° is too low it would spin to 100%

If keeping the fan at 100% is not enough to bring the temperature down to t°, then spinning them at 100% is the expected behaviour. Or have I misunderstood your request?

[Divinity666]

Please fix --tfan behavior when t° is too low it would spin to 100%

It happens when actual t° is lower than --tfan by 10C° or so.

[trexminer]

Please fix --tfan behavior when t° is too low it would spin to 100%

It happens when actual t° is lower than --tfan by 10C° or so.

I see. It could be a bug or a conflict with some other software capable of controlling the fan. Would you mind running the miner with "-P -l trex.log" and upload the full log file when it happens again? Thanks.

[Divinity666]

Code:

22:37:03.962[44.191] Authorizing...
22:37:04.009[44.233] [000200]: initialize mtweak, code 1
22:37:04.009[44.234] [000200]: initialize mtweak, code 2
22:37:04.009[44.234] GPU #0(000200): MSI NVIDIA GeForce GTX 1080 Ti, intensity 16.7, mtweak 6[2] [a], auto-fan (core) 58C
22:37:04.071[44.291] <-IN-36-274 {"id":3,"result":true,"error":null}
22:37:04.071[44.292] Authorized successfully.
22:37:04.071[44.292] -OUT-> {"id":2,"method":"mining.extranonce.subscribe","params":[]}
22:37:04.071[44.293] ergo-eu1.nanopool.org:11111 asks job  for block 0
22:37:04.071[44.293] <-IN-58-216 {"id":null,"method":"mining.set_difficulty","params":[1]}
22:37:04.071[44.293] ergo-eu1.nanopool.org:11111 asks job  for block 0
22:37:04.071[44.294] <-IN-216-0 {"id":null,"method":"mining.notify","params":["281f",535798,"4c701450173e3dcfc9e61d4a16b6ebcfeab607cbd8cb892bbb35c4c85e082a6d","","",2,"11579208923731619542357098500868790785326998466564056403945758400791","",true]}
22:37:04.071[44.294] GOT NEW WORK job_id=281f, old: job_id=
22:37:04.071[44.295] autolykos2 block: 535798, diff: 10.00 G
22:37:04.071[44.295] WARN: New iteration find nonces for device [ID=0, GPU #0]: job_id=281f
22:37:04.149[44.378] <-IN-36-63 {"id":2,"result":true,"error":null}
22:37:04.149[44.378] ergo-eu1.nanopool.org:11111 asks job 281f for block 535798
22:37:04.149[44.379] <-IN-63-0 {"id":null,"method":"mining.set_extranonce","params":["9077"]}
22:37:04.149[44.379] ergo-eu1.nanopool.org:11111 asks job 281f for block 535798
22:37:04.227[44.459] GPU #0: allocated memory for the dataset, memory left: 8.67 GB
22:37:06.115[46.348] GPU #0: dataset generated for block 535798 [time: 1888 ms]
22:37:13.774[53.995] fan=50% for [0]
22:37:13.774[53.995] GPU #0: auto-fan activated, target core temperature 58C
22:37:13.774[53.996] auto-fan for [0]: core temperature: 50C, target: 58C, delta: -15.0%
22:37:13.774[54.000] fan=100% for [0]
22:37:13.774[54.000] [000200]: initialize mtweak, code 1
22:37:13.774[54.001] [000200]: initialize mtweak, code 2
22:37:24.273[64.492] auto-fan for [0]: core temperature: 50C, target: 58C, delta: -6.4%
22:37:24.273[64.496] fan=94% for [0]
22:37:29.967[70.199] <-IN-217-0 {"id":null,"method":"mining.notify","params":["2820",535798,"4c701450173e3dcfc9e61d4a16b6ebcfeab607cbd8cb892bbb35c4c85e082a6d","","",2,"11579208923731619542357098500868790785326998466564056403945758400791","",false]}
22:37:29.967[70.200] ergo-eu1.nanopool.org:11111 asks job 281f for block 535798
22:37:34.522[74.741] auto-fan for [0]: core temperature: 49C, target: 58C, delta: -9.2%
22:37:34.522[74.745] fan=85% for [0]
22:37:44.771[84.990] auto-fan for [0]: core temperature: 48C, target: 58C, delta: -10.0%
22:37:44.771[84.992] fan=75% for [0]
22:37:55.270[95.490] auto-fan for [0]: core temperature: 48C, target: 58C, delta: -8.0%
22:37:55.270[95.496] fan=67% for [0]
22:38:05.519[105.738] auto-fan for [0]: core temperature: 48C, target: 58C, delta: -8.0%
22:38:05.535[105.760] fan=59% for [0]
22:38:15.769[115.994] auto-fan for [0]: core temperature: 48C, target: 58C, delta: -8.0%
22:38:15.769[115.997] fan=51% for [0]
22:38:24.605[124.826] <-IN-216-0 {"id":null,"method":"mining.notify","params":["2821",535799,"a24a96bef53a3bf81dd433e9872b147f399c660dffcfc0903fa352ff9efc01b1","","",2,"11579208923731619542357098500868790785326998466564056403945758400791","",true]}
22:38:24.605[124.828] GOT NEW WORK job_id=2821, old: job_id=281f
22:38:24.605[124.829] autolykos2 block: 535799, diff: 10.00 G
22:38:24.605[124.830] WARN: New iteration find nonces for device [ID=0, GPU #0]: job_id=2821
22:38:26.274[126.492] auto-fan for [0]: core temperature: 50C, target: 58C, delta: -2.4%
22:38:26.274[126.495] fan=49% for [0]
22:38:26.414[126.640] GPU #0: dataset generated for block 535799 [time: 1809 ms]
22:38:36.523[136.742] auto-fan for [0]: core temperature: 49C, target: 58C, delta: -9.2%
22:38:36.523[136.748] fan=40% for [0]
22:38:46.772[146.995] auto-fan for [0]: core temperature: 49C, target: 58C, delta: -7.2%
22:38:46.772[146.998] fan=33% for [0]
22:38:47.802[148.031] -OUT-> {"id":38151680,"method":"mining.submit","params":["9f1HsWnFA6afmw8n91GenKDbXFip66ZGxQagWjhrGxGq699ZC5Y.Rig2/andrewkonin@gmail.com","2821","000091c34762","00000000","9077000091c34762"],"worker":"DivinitY-PC"}
22:38:47.896[148.123] <-IN-43-0 {"id":38151680,"result":true,"error":null}
22:38:47.896[148.125] [ OK ] 1/1 - 113.39 MH/s, 94ms ... GPU #0
22:38:47.896[148.126] ergo-eu1.nanopool.org:11111 asks job 2821 for block 535799
22:38:57.271[157.490] auto-fan for [0]: core temperature: 50C, target: 58C, delta: -4.4%
22:38:57.271[157.497] fan=29% for [0]
22:39:07.520[167.740] auto-fan for [0]: core temperature: 51C, target: 58C, delta: -3.6%
22:39:07.520[167.746] fan=25% for [0]
22:39:17.785[178.002] auto-fan for [0]: core temperature: 51C, target: 58C, delta: -5.6%
22:39:17.785[178.005] fan=19% for [0]
22:39:24.961[185.179] <-IN-217-0 {"id":null,"method":"mining.notify","params":["2822",535799,"a24a96bef53a3bf81dd433e9872b147f399c660dffcfc0903fa352ff9efc01b1","","",2,"11579208923731619542357098500868790785326998466564056403945758400791","",false]}
22:39:24.961[185.181] ergo-eu1.nanopool.org:11111 asks job 2821 for block 535799
22:39:28.268[188.487] auto-fan for [0]: core temperature: 52C, target: 58C, delta: -2.8%
22:39:28.284[188.501] fan=16% for [0]
22:39:38.518[198.737] auto-fan for [0]: core temperature: 53C, target: 58C, delta: -2.0%
22:39:38.518[198.743] fan=14% for [0]
22:39:54.601[208.984] auto-fan for [0]: core temperature: 54C, target: 58C, delta: -1.2%
22:39:54.601[208.988] fan=13% for [0]
22:40:05.099[219.484] auto-fan for [0]: core temperature: 55C, target: 58C, delta: -0.4%
22:40:05.099[219.489] fan=13% for [0]
22:40:15.364[229.749] auto-fan for [0]: core temperature: 56C, target: 58C, delta: 0.4%
22:40:15.364[229.753] fan=13% for [0]
22:40:25.613[239.997] auto-fan for [0]: core temperature: 56C, target: 58C, delta: -1.6%
22:40:25.613[240.000] fan=11% for [0]
22:40:29.529[243.924] -OUT-> {"id":62700288,"method":"mining.submit","params":["9f1HsWnFA6afmw8n91GenKDbXFip66ZGxQagWjhrGxGq699ZC5Y.Rig2/andrewkonin@gmail.com","2821","000321809c15","00000000","9077000321809c15"],"worker":"DivinitY-PC"}
22:40:29.623[244.019] <-IN-43-0 {"id":62700288,"result":true,"error":null}
22:40:29.623[244.020] [ OK ] 2/2 - 115.08 MH/s, 96ms ... GPU #0
22:40:29.638[244.020] ergo-eu1.nanopool.org:11111 asks job 2821 for block 535799
22:40:31.807[246.193] <-IN-217-0 {"id":null,"method":"mining.notify","params":["2823",535799,"a24a96bef53a3bf81dd433e9872b147f399c660dffcfc0903fa352ff9efc01b1","","",2,"11579208923731619542357098500868790785326998466564056403945758400791","",false]}
22:40:31.807[246.195] ergo-eu1.nanopool.org:11111 asks job 2821 for block 535799
22:40:36.112[250.496] auto-fan for [0]: core temperature: 57C, target: 58C, delta: 1.2%
22:40:36.112[250.502] fan=12% for [0]

[spike42]

Lol alright I was chill when it said you were a low-risk PUP but now you're scanning as a known trojan? What's going on here bud?

https://i.ibb.co/y6HJwCh/sabsik.png

[trexminer]

Lol alright I was chill when it said you were a low-risk PUP but now you're scanning as a known trojan? What's going on here bud?

https://github.com/trexminer/T-Rex#antivirus-alerts

[xinxilas]

Is it safe to underclock memory more than -502?

MSi AFter burner has a -502 limit, using --mclock i can underclock even more...

[miner29]

Is it safe to underclock memory more than -502?

MSi AFter burner has a -502 limit, using --mclock i can underclock even more...

Worst that can happen is card hangs and system requires a reboot to unhang it (and of course remove the oc/uv that caused the card to hang).