EWBF's Cuda Equihash Miner 0.6

[Dbrouwers]

Good news everyone! v0.5 delivered.

Great release so far! Good results here.

[minefarmbuy]

Good news everyone! v0.5 delivered.

Thanks for the work. Will hope to run here soon!

[anotherwave]

Just tried out v0.5 and its great so far. Awesome hashing improvement on my 1070 & 1080ti. Thanks and great work EWBF!

[mytiburon]

WOW, now thats an update! best by a mile on my 1070ti and 1080ti

[HFG5521]

After a number of people here and in the other discords had mentioned that they were getting the cuda memory errors on their rigs after the .4 update, but getting less of them when they took their overclocks off, I've since followed the same route and seen better, but still frustrating results. I haven't added an OC profile to .5 yet, but it is running smoothly so far, and with much improved hash rates on the 1070ti's and 1080ti's. Currently running some variation of 65% TDP and 65-75% fan speeds with no core/mem adjustments. Would love to see what others are showing for stability on their OC settings on 0.5 with 1070ti+ cards.

[meinerneiner]

I'm seeing 15-20% increases in 144,5 hash rates with my farm of 1060's.  Moving on to the bigger metal now.

1070's - now getting average of 42 sol/s with v0.5 and an OC like this: 75% PL, +122 Core, +255 Mem

1080's - now getting average of 47-48 sol/s with v0.5 and OC like this: 70% PL, +97 Core, +401 Mem

For the 1080's, I'm seeing about a 16% gain over 0.4, with the same exact overclock and all, apples to apples, from the v0.4 days.  WOW!  Thank you sir!

UPDATE: 1080ti - just received this card, getting 70-71 sol/s with slight overclock 97/282 and 95% PL.  FUN FUN FUN!

[Elder III]

Very nice boost to the hashrate based on the little bit of testing I have done so far.  Nice indeed.

[hell_slayer]

It's great to see a v0.5 arrived . I noticed a hashrate improvements and seems like we can decrease mining intensity now . I want to thank you EWBF for your work and feedback on a community replies , as you are fixed all the major existing problems . :cheers:

[Hurtman]

any news for Maxwell? (GTX980)

[peryskop]

It's great to see a v0.5 arrived . I noticed a hashrate improvements and seems like we can decrease mining intensity now . I want to thank you EWBF for your work and feedback on a community replies , as you are fixed all the major existing problems . :cheers:

How to change mining intensity?

[twente-mining]

Great increase in hashrates without changing my OC settings...

10x 1070's Armor - now getting average of 41 sol/s with v0.5 and an OC like this: 65% PL, +50 Core, +400 Mem ( total powerdraw = 1290 w )

4x 1070ti Armor - now getting average of 45 sol/s with v0.5 and an OC like this: 65% PL, +130 Core, +550 Mem ( total powerdraw = 619 w )

2x 1070ti Gigabyte Aorus - now getting average of 44 sol/s with v0.5 and an OC like this: 65% PL, +130 Core, +550 Mem ( total powerdraw = 287 w )

3x 1080ti Founders - now getting average of 62 sol/s with v0.5 and OC like this: 65% PL, +125 Core, +500 Mem ( total powerdraw = 547 w )

4x 1080ti OC STrix - now getting average of 63 sol/s with v0.5 and OC like this: 65% PL, +50 Core, +500 Mem ( total powerdraw = 922 w )

5x 1080ti Asus Turbo - now getting average of 58 sol/s with v0.5 and OC like this: 65% PL, +100 Core, +500 Mem ( total powerdraw = 894 w )

6x 1080ti Aorus - now getting average of 60 sol/s with v0.5 and OC like this: 65% PL, +100 Core, +500 Mem ( total powerdraw = 1120 w )


All temps ( even with this high of temperature outside ) around 70 degrees celcius

[twente-mining]

It's great to see a v0.5 arrived . I noticed a hashrate improvements and seems like we can decrease mining intensity now . I want to thank you EWBF for your work and feedback on a community replies , as you are fixed all the major existing problems . :cheers:

How to change mining intensity?

add command --intensity (number) in your batfile

[mySmile28]

Love you, EWBF!!   1063 has now up to 30 sol/s, average 27 sol/s (70%PL, +146 core, +300mem) driver 390.65 and the voltage jumps became slightly smaller

[SchroedingerC]

thanks!!1 v 0.5 rocks!
my RIGs got more stable, giving 10~15% higher hashrate 

[twente-mining]

i do see an issue with my 10x 1070 cards...

Al of a sudden they drop in hash to 9-18 sols .....

Haven't had that before with the adjusted 0.3 version ...

I have set the intensity to 32, but after around 15 min the sols drop ....
And after a few minutes it goes up again ...

i will keep an eye on it, if it continues, i will try the older version again, and see if it is the software, or that my powersupply's are getting lazy

[swisstrader]

Good job, man!

Rig with 5 x 1070 Ti (tuned with PL=120W and OC=200/1200)

Before with v0.3 (0.4 crashed my rigs sometimes):


After with v0.5 without any changings of my tuning:


From 199 sol/s to 236 sol/s.  
About 18.5 % more solutions than before.

Thank you so much for fixing the v0.4 issues.

[meinerneiner]

Dumb question on my part likely - but how did you get Power usage stats to display there in your log output?  I never have seen that, and could DEFINITELY use that to my advantage.  Thanks for sharing, great stats thanks to v0.5...nice indeed!  Cheers.

[swisstrader]

Dumb question on my part likely - but how did you get Power usage stats to display there in your log output?  I never have seen that, and could DEFINITELY use that to my advantage.  Thanks for sharing, great stats thanks to v0.5...nice indeed!  Cheers.

Adapt in your config file following line:

pec   0   =>   pec   1

That's it!
Enjoy!

[Regulater]

Good news everyone! v0.5 delivered.

Can you explain how the --pers can be changed from the miner. Would like to get this implemented in Mining Rig Rentals. Can it just be specified like normal by --pers by the pool or is it a different command.

[crypper]

Good news everyone! v0.5 delivered.

Up to 40 sol/s with GTX 1070 (no overclock, 70% power) vs 33 sol/s on v0.3.
EWBF, any chance you can publish checksums for your distros? just for paranoid people like myself....