EWBF's Cuda Equihash Miner 0.6

[topteam]

every second time restart miner API not start, please fix it
ubuntu 16

Code:

ERROR: Api bind error

[1713505312]

1713505312

[1713505312]

1713505312

[Manojdaran]

All the shares are rejected! Tried different pools yet all the shares are rejected. TDP 70 core 200 mem 600. What did I miss?

[MOAMiner]

EWBF is still not flushing stdout - is this by purpose?

It makes it almost impossible for monitoring apps to handle miner output

btw.: claymore has the same: not flushing stdout.

[CarlOrff]

All the shares are rejected! Tried different pools yet all the shares are rejected. TDP 70 core 200 mem 600. What did I miss?

It is your OC : you know it is too high...

[colin012]

Welcome back. Why the total removal of 200,9 ?

In fact, I'll probably return 200,9 variant later, the main reason is different optimization methods, it was too hard to put this solvers in an old miner. And, another reason is an asic's of course.

Hey, just wanted you to know, there are still GPU mineable 200,9 coins out there, even with the onset of ASICS. Komodo's new all Z-Address asset chain, PIRATE, is still mineable for me with a single GeForce GTX 1060.

I made about $1 USD worth in 3 days in a pool with a 5% fee (it is current the only pool for it) with on and off mining and averaging around 260 Sols/sec while on. Yeah, it isn't much, but what do you expect for a single graphics card?

I know ASICS have made 200,9 coins less profitable for GPU miners so it probably isn't on your priority list of improvements, but it is still doable for some coins and I would like to see it on your miner again.

[EWBF_]

Hi EWBF!

I have a question. Does anyone know if the current version of EWBF runs on the mining specific cards specifically the P106-090 3GB? This is the older version of the typical P106-100 which is 6GB. I am looking to mine BTG 144,5.

From the reading I have done I sounds like the most current version of EWBF 0.5 runs fine on win 10 with the GTX 1060 3GB. So it should run fine of the mining specific cards?

Any replies would be greatly appreciated!!

I do not have these cards, but I think they will work fine, also these cards look slower than 1060 3 GB.

I have 12 evga 1070 SCs on Win10 Pro using nvidia inspector to OC to 100/450 85% power. each card using around 123 watts. and my SOL/s is about 470 in EWBF 0.5

I previously had this machine running on Win10 Home, same hardware, using EWBF 0.4 I'd get about 470 sol/s then i upgraded to 0.5 and was getting 505-515 sol/s. but formatted ssd and did a clean install of win10 pro and now EWBF 0.5 is maxing at 475 sol/s and not over 500 as previously achieved with same OC settings. I'm at a loss.

I also updated B250 mining expert from bios 1010 to bios 1026, or whatever the latest BIOS is. Could this contribute?

Which version of nvidia driver are you currently using?

Hello,

Does this miner support Commercium?

https://bitcointalk.org/index.php?topic=4355691.0

It has a Equihash algorithm on a "Zerocoin" fork

And which algo and pers should iI use.

Or should I use 0.3.4b

This is Equihash 200,9, you need to use an old miner.

Hello, i am having problem with 0.5 and 0.4 ( i havent tried the older one). When i start mining after 10 15 min all cards crash. There is a message that says GPU 0 , 1 ,2 are unavaible or busy and trying to restart. I am usisng 1060 6 g , 1070 TI and 1080 TI. My OC setttings are Power 90 %  0 clock on memory and the other one is 0 only my fan speed is changed and they crash with 0 OC i am usising windows 7. Can someone help ?

Run one copy of the miner for each card, this will help you figure out which card causes the problem, check the power supply (is it able to handle the load?), cables, risers, etc.

every second time restart miner API not start, please fix it
ubuntu 16

Code:

ERROR: Api bind error

Ok, I'll check it out.

EWBF is still not flushing stdout - is this by purpose?

It makes it almost impossible for monitoring apps to handle miner output

btw.: claymore has the same: not flushing stdout.

Just add --boff argument.

[Manojdaran]

All the shares are rejected! Tried different pools yet all the shares are rejected. TDP 70 core 200 mem 600. What did I miss?

It is your OC : you know it is too high...

Same with the other miner which had no issues, anyway I will try with reduced OC

[MOAMiner]

EWBF is still not flushing stdout - is this by purpose?

It makes it almost impossible for monitoring apps to handle miner output

btw.: claymore has the same: not flushing stdout.

Just add --boff argument.

works like a charm, thank you

[Sikkan666]

anyonle knows if its possible to solo mine with ewbf..and perhaps guide me to how to do it? wallet is running on one LAN IP and four of my rigs have obviously 4 other IPs its in the 192.1.168.x range with a standard /24 netmask (255.255.255.0)

[invizion]

Those mining Aion with 1080Ti and EWBF v0.5, what OC and power settings are you using? What's the typical efficiency Sol/W?

[CarlOrff]

Those mining Aion with 1080Ti and EWBF v0.5, what OC and power settings are you using? What's the typical efficiency Sol/W?

It's depends of your 1080Ti.
My efficiency : 0.43 sol/W with this GPU (MSI).
The 1080Ti has the best efficiency of all my GPUs.

[sereupin]

Those mining Aion with 1080Ti and EWBF v0.5, what OC and power settings are you using? What's the typical efficiency Sol/W?

It's depends of your 1080Ti.
My efficiency : 0.43 sol/W with this GPU (MSI).
The 1080Ti has the best efficiency of all my GPUs.

hi, how $/€ you earn per day with your 1080ti and aion? is it profitable?

[CarlOrff]

Those mining Aion with 1080Ti and EWBF v0.5, what OC and power settings are you using? What's the typical efficiency Sol/W?

It's depends of your 1080Ti.
My efficiency : 0.43 sol/W with this GPU (MSI).
The 1080Ti has the best efficiency of all my GPUs.

hi, how $/€ you earn per day with your 1080ti and aion? is it profitable?

My 1080Ti is not alone.
And, no it is no more pofitable at tis time

[minefarmbuy]

You can still make a $1/day "ish" profit with a few 1070's. With one 1080 I wouldn't expect to make enough to upgrade the card anytime soon. Then if you can soak the power cost it's just kind of fun to know you're making a few cents a day if your a hobbyist. 

[steelminer]

I'm getting the following error on one of my rigs:

ERROR:  Looks like GPU4 are stuck
WARNING:  Looks like GPU4 are stopped. Restarting...

I'm running ewbf-v0.5-cuda9.1 on SMOS mining equihash-BTG

Motherboard is an asrock h110 pro btc+ running 13x 1060 6gb gpu's

I've reduced OC on GPU4 but still getting the error anywhere from 1-2 hours after a restart to 1 day.  Rest of the gpu's are mining fine.

Any ideas how to fix the error?

[OpenArtis]

You can still make a $1/day "ish" profit with a few 1070's. With one 1080 I wouldn't expect to make enough to upgrade the card anytime soon. Then if you can soak the power cost it's just kind of fun to know you're making a few cents a day if your a hobbyist. 

I am making some about 4,75-5$ a day with 10x 1070 mining x16r coins right now ...of course in you're miner you should stick to your mined coins and wait undid better times come to sell them

[goshoxray]

Guys can you please tell me how to control the fan speed on ubuntu. I have instaled 18.04 and i use only the console not the grafic dekstop, but i cant change the fan speed. Can you please tell me the commands.

[fistsofgod]

I have 12 evga 1070 SCs on Win10 Pro using nvidia inspector to OC to 100/450 85% power. each card using around 123 watts. and my SOL/s is about 470 in EWBF 0.5

I previously had this machine running on Win10 Home, same hardware, using EWBF 0.4 I'd get about 470 sol/s then i upgraded to 0.5 and was getting 505-515 sol/s. but formatted ssd and did a clean install of win10 pro and now EWBF 0.5 is maxing at 475 sol/s and not over 500 as previously achieved with same OC settings. I'm at a loss.

I also updated B250 mining expert from bios 1010 to bios 1026, or whatever the latest BIOS is. Could this contribute?

Which version of nvidia driver are you currently using?

was using 399.07, driver date 8/21/18. updated to 411.63 date: 9/18/18 and it got slower. one gpu is down to 35 sol/s

[paranoid247]

Guys can you please tell me how to control the fan speed on ubuntu. I have instaled 18.04 and i use only the console not the grafic dekstop, but i cant change the fan speed. Can you please tell me the commands.

Open a Terminal and enter each line:

sudo update-grub

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

(You can run with offer coolbits settings, 31 is frequently used as well).
 
REBOOT

Fans control and overclocking is now enabled.

To finish, you will create a startup sh file for each GPU so the overclocks and fan speed are loaded when you log into Ubuntu 18.04LTS.

Create some empty documents on Ubuntu Desktop and call them whatever you like. Make sure the filename has .sh at the end.

Paste in:

!/bin/bash

nvidia-settings -a '[gpu:0]/GPUGraphicsMemoryOffset[3]=100'

nvidia-settings -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=100'

nvidia-settings -a '[gpu:0]/GPUFanControlState=1'

nvidia-settings -a '[fan:0]/GPUTargetFanSpeed=80'

Amend the clocks (GPU and Memory) and fan speeds to whatever you're comfortable with. Make separate documents for each GPU by changing the numbers for each card.

Save and open properties and make each file "executable".

Go to Startup Applications and ADD each .sh to the programs you run when you log in.

[fistsofgod]

anyone know how to downgrade B250 mining expert bios? ez flash 3 wont let me flash an older bios version