3DesTeam
Full Member
 
Offline
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
|
 |
June 25, 2018, 04:46:38 PM Last edit: September 24, 2018, 12:16:09 PM by 3DesTeam |
|
ICO has ended 20 July 2018
Listing on IDEX and CREX24
Dear members of the 3DES project!
Today we officially announce a successful listing and start of the main token trades on IDEX and CREX24 exchanges. Below you can see the links to the trading pairs.
https://idex.market/eth/3des https://crex24.com/ru/exchange/3DES-BTC
You can buy and sell 3DES tokens. We are preparing a platform for the participants of the Private and pre-ICO stages to switch to the main token. We plan to launch the platform in November, we will post about it separately.
We continue the MVP improvement, and there will be a new product update release soon. Also, we are working on scaling up the project and we will tell about it as well. Stay tuned to follow the project development news.
Always with you, 3DES Team
The 3DES product update
Dear 3DES project participants, Today we have good news to share with you: we’ve launched the expected MVP update.
The technical work description is provided below. We’re glad you have joined the project and offer you to test the updated product version.
At the moment we are working on entering the exchanges, we will post the results soon.
3DES MVP: the technical description of the updates. Launching trades with a new token
The 3DES project is scaling up, announces a new token launch and the trade starts. At the moment the tokens are already listed on a decentralized exchange EtherDelta and soon will be listed on other exchanges. The 3DES team is actively developing the project. Stay tuned! exchange
New feature of 3DES project
The 3DES team’s task is to optimize the process of proceeding a large number of models using minimal resources. For this goal, we developed a decentralized computing capacities exchange for slicing tasks. While developing the system we assumed that the exchange can be scaled up for other tasks as well, besides only working with 3D models.
JOIN COMMUNITY:
MVP
_______________________________________________________________________________ ____________________________ You can contact with us by the following email: info@3des.network. Do not hesitate to ask any question or claim partnership!
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
|
|
|
tokenwar
Member

Offline
Activity: 308
Merit: 10
|
 |
June 25, 2018, 04:58:22 PM |
|
when will you launch the ICO? will you announced the date here?
|
|
|
|
susunyonya
|
 |
June 25, 2018, 09:40:27 PM |
|
the design of this project is very good can be seen from the roadmap of this project, I see the total supply of coins is not excessive, this project also developed a bounty program with a lot of fund allocation, where I can see the thread from bounty?
|
|
|
|
Tripple O
Jr. Member
Offline
Activity: 82
Merit: 1
|
 |
June 25, 2018, 10:05:34 PM |
|
the design of this project is very good can be seen from the roadmap of this project, I see the total supply of coins is not excessive, this project also developed a bounty program with a lot of fund allocation, where I can see the thread from bounty?
Yes, I also cannot find the bounty thread. Just a thread for referral. Do you have no bounty campaigns besides referral?
|
|
|
|
bantalguling
|
 |
June 25, 2018, 10:24:37 PM |
|
I see the coin sale program on this project goes long enough with the total supply of coins is not excessive, the increase in coin prices is also quite significant each day, how much hardcap of this project?
|
|
|
|
rokieinvest
|
 |
June 25, 2018, 11:18:58 PM |
|
what will the bonus during the presale?
|
|
|
|
fcmatt
Legendary
Offline
Activity: 1932
Merit: 1001
|
 |
June 25, 2018, 11:42:48 PM |
|
when will you launch the ICO? will you announced the date here?
you can visit the website and you will see that the ICO has been started and will end in 24 days i see there is a bounty program, and when will the bounty start?
|
|
|
|
teguhpurwadi
Newbie
Offline
Activity: 168
Merit: 0
|
 |
June 26, 2018, 05:54:15 AM |
|
Do you have a specific target for softcap? I still cannot understand how much you have collected the funds.
|
|
|
|
Knockwill
Newbie
Offline
Activity: 119
Merit: 0
|
 |
June 26, 2018, 08:41:11 AM |
|
If you'll get partnership with SONM or other decentralized computing projects it will boost you to the moon.
|
|
|
|
feizang
Newbie
Offline
Activity: 30
Merit: 0
|
 |
June 26, 2018, 12:49:49 PM |
|
I cannot find the bounty thread. only ico ... I would like to see more information,some active reply from the administrator  ❤️
|
|
|
|
rokieinvest
|
 |
June 26, 2018, 05:49:07 PM |
|
when will you launch the ICO? will you announced the date here?
you can visit the website and you will see that the ICO has been started and will end in 24 days i see there is a bounty program, and when will the bounty start? Do you have the link yo their bounty thread?
|
|
|
|
3DESsupport
Newbie
Offline
Activity: 145
Merit: 0
|
 |
June 28, 2018, 07:51:36 AM |
|
when will you launch the ICO? will you announced the date here?
you can visit the website and you will see that the ICO has been started and will end in 24 days i see there is a bounty program, and when will the bounty start? Do you have the link yo their bounty thread? I cannot find the bounty thread. only ico ... I would like to see more information,some active reply from the administrator  ❤️ Hello! There isn't an active bounty program now, I suggest you joining the referral program instead! You can get your referral link in your profile on the website: 3des.network
|
|
|
|
sarul
Copper Member
Sr. Member
  
Offline
Activity: 798
Merit: 250
|
 |
June 28, 2018, 08:18:05 AM |
|
I see the ICO is not running well, I hope you have good enough an advertising idea to gain interest. What about token that reserved for the team? Is it would be frozen first or can be sold immediately?
|
|
|
|
Jia Ang
Newbie
Offline
Activity: 36
Merit: 0
|
 |
June 28, 2018, 04:30:53 PM |
|
The question is not whether to buy or not. The question is how much we will earn after going on the exchange with such baggage. Personally I'm waiting for X3-5
|
|
|
|
FoxTol
Newbie
Offline
Activity: 124
Merit: 0
|
 |
June 28, 2018, 04:41:15 PM |
|
Do you have a specific target for softcap? I still cannot understand how much you have collected the funds.
They said in Telegram that there is no soft cap. They will continue working in any case, just the scale depends on the money they collect on ICO.
|
|
|
|
Entonio
Newbie
Offline
Activity: 113
Merit: 0
|
 |
June 28, 2018, 10:00:48 PM |
|
The ICO is still on, right?
|
|
|
|
tunnel
Member

Offline
Activity: 207
Merit: 21
|
 |
June 28, 2018, 10:06:52 PM |
|
Your ico will last only for 4 weeks, will it be enough for a project like this? Or are you planning to extend it?
|
|
|
|
ottogary
|
 |
June 29, 2018, 03:43:44 AM |
|
I don't have experience in 3d printing, how long do it takes to do a splicing alone on a single 3D design? How much do it maximized after using 3DES?
|
|
|
|
znaneswar
Newbie
Offline
Activity: 46
Merit: 0
|
 |
June 29, 2018, 05:25:51 AM |
|
Interesting project. slicing concept is looks cool. In the first post ICO date not mentioned. Just added timer as 18days. but when the ICO will start? any bonus for ICO investors?
|
|
|
|
NICAT.59
Newbie
Offline
Activity: 56
Merit: 0
|
 |
June 29, 2018, 06:13:33 AM |
|
There are so many stages. Why chosed to do so?
|
|
|
|
Kostya.bom
Newbie
Offline
Activity: 122
Merit: 0
|
 |
June 29, 2018, 10:40:53 AM |
|
Is your referral program available at the moment?
|
|
|
|
focacho1
|
 |
June 29, 2018, 10:48:06 AM |
|
Are you interested in partnership with investments pools?
|
|
|
|
vill34
Member

Offline
Activity: 127
Merit: 13
MODERN FINANCE CHAIN
|
 |
June 30, 2018, 07:12:29 PM |
|
Will there be an ethereum analog network that will process the payments in DES tokens, based on the original ethereum code base or may by something else?
|
|
|
|
ajeshjoy
Newbie
Offline
Activity: 56
Merit: 0
|
 |
July 01, 2018, 07:43:47 AM |
|
What is the MOQ?
|
|
|
|
faspik4
Member

Offline
Activity: 178
Merit: 10
|
 |
July 02, 2018, 05:47:26 AM |
|
Is your referral program available at the moment?
I'm using my ref link, it works just fine. I think you can get yours in the profile on the website too.
|
|
|
|
ZazaCash
Newbie
Offline
Activity: 155
Merit: 0
|
 |
July 02, 2018, 11:33:58 AM |
|
How long the tokensale will last?
|
|
|
|
Oleg_93
Newbie
Offline
Activity: 142
Merit: 0
|
 |
July 03, 2018, 01:40:46 PM |
|
So, your project will develop system for processing data (video, audio, science info), not only slicing 3D models? I think your project has big future.
It definitely does! For now the most popular project like this was Sonm, but there should be more of these to benefit different kinds of needs.
|
|
|
|
denyfirmasyahputra
Newbie
Offline
Activity: 156
Merit: 0
|
 |
July 04, 2018, 05:32:45 AM |
|
Will there be an ethereum analog network that will process the payments in DES tokens, based on the original ethereum code base or may by something else?
I think with time the team will improve its system and create the above conditions for the existence of their tokens. I am also experiencing similar obstacles when trying this project's website and I hope the team will fix the bugs on the project's website,
|
|
|
|
Papsie
|
 |
July 04, 2018, 06:43:31 AM |
|
I saw the countdown of live ICO of this project and I worried because the amount being sold is around 787 coins only and there are a lot of remaining coins. Maybe the team should make some activities that will help to have some improvement in ico.
|
|
|
|
NICAT.59
Newbie
Offline
Activity: 56
Merit: 0
|
 |
July 04, 2018, 06:50:57 AM |
|
Since long ago, I've always wanted to have my hands on 3D printing, and i heard from my friend, that the printing process taking really long time do to the splicing of the model before it print. Now i meet this project that suppose to be fastening the splicing process, that way the 3D printing process will be faster.
Do you have an experience in 3d printing or models slicing?
|
|
|
|
Ilya.miy
Newbie
Offline
Activity: 157
Merit: 0
|
 |
July 04, 2018, 08:25:51 AM |
|
Will you update the WP?
|
|
|
|
visionary
|
 |
July 04, 2018, 08:27:35 AM |
|
Since long ago, I've always wanted to have my hands on 3D printing, and i heard from my friend, that the printing process taking really long time do to the splicing of the model before it print. Now i meet this project that suppose to be fastening the splicing process, that way the 3D printing process will be faster.
Do you have an experience in 3d printing or models slicing? 3d modelling can be done with cutting costs. Excellent opportunities for any company. I think it can work.
|
|
|
|
Point.cash
Newbie
Offline
Activity: 111
Merit: 0
|
 |
July 04, 2018, 10:00:31 PM |
|
How is the token sale going?
|
|
|
|
m_nikiforov
Newbie
Offline
Activity: 158
Merit: 0
|
 |
July 04, 2018, 10:03:58 PM |
|
as I understand it is now 19 round of 24. say, the site says that sold 412 thousand tokens. is this for all the last rounds? What is your soft cap?
|
|
|
|
Tim.Bet
Member

Offline
Activity: 161
Merit: 10
|
 |
July 05, 2018, 02:29:48 AM |
|
How the token utility will work with the new feature?
|
|
|
|
Mariia_BT
Full Member
 
Offline
Activity: 686
Merit: 100
★Bitvest.io★ Play Plinko or Invest!
|
 |
July 05, 2018, 11:29:06 AM |
|
the new product version will have a more complex interface?
I think the interface will not be complicated but improved. developers will try to make it more user-friendly. and eventually everything will be updated.
|
|
|
|
Timur.brnd
Jr. Member
Offline
Activity: 148
Merit: 3
|
 |
July 05, 2018, 07:24:19 PM |
|
Do u have any bounty now?
|
|
|
|
icooker
Newbie
Offline
Activity: 120
Merit: 0
|
 |
July 05, 2018, 07:49:07 PM |
|
Will you get an exchange soon?
|
|
|
|
Na xter
Member

Offline
Activity: 210
Merit: 10
|
 |
July 05, 2018, 08:02:59 PM |
|
I did not find information on what dates the distribution of tokens will pass. Could you tell me and write when and at what time?
|
|
|
|
Kare.Toll
Jr. Member
Offline
Activity: 127
Merit: 2
|
 |
July 05, 2018, 10:24:18 PM |
|
I think theyshould move to DEX exchanges. They are close future trend.
|
|
|
|
maxiorek
Jr. Member
Offline
Activity: 38
Merit: 2
|
 |
July 06, 2018, 10:18:11 AM |
|
Do you have any airdrop ?
|
|
|
|
lanangejagat
Full Member
 
Offline
Activity: 300
Merit: 100
“Blockchain Just Entered The Real World”
|
 |
July 07, 2018, 04:13:06 PM |
|
WhiteShum, ICO is active now and you can join. Their site here https://3des.network/
|
|
|
|
Sergei.Gerasimenko
|
 |
July 07, 2018, 04:15:23 PM |
|
Sorry to say that, but such projects are not interesting for investors at this stage of blockchain evolution. As for me, I don't understand why this project needs blockchain...
|
|
|
|
Oranium80
Jr. Member
Offline
Activity: 89
Merit: 2
|
 |
July 07, 2018, 04:19:11 PM |
|
Sorry to say that, but such projects are not interesting for investors at this stage of blockchain evolution. As for me, I don't understand why this project needs blockchain...
take the stress of the PC and make this community have a market for STL files and a listing of people that can assist you with your project makes sense to me, this community is not evolved enough and this is basically taking it to the next level to create a transparent place that will reduce STL files stolen and projects being compromised.
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
benalexis12
Full Member
 
Offline
Activity: 346
Merit: 100
🚀🚀 ATHERO.IO 🚀🚀
|
 |
July 07, 2018, 05:27:46 PM |
|
I haven't read yet their white paper. What's the real cases of this coin? How can it solve the problem of blockchain? Willing to get some idea with some of you guys. You're response is much appreciated.
|
|
|
|
Spooknow
|
 |
July 08, 2018, 08:15:22 AM |
|
I haven't read yet their white paper. What's the real cases of this coin? How can it solve the problem of blockchain? Willing to get some idea with some of you guys. You're response is much appreciated.
It seems that the answer was not as it was and will not be. I, too, do not quite understand why there is a full-fledged blockchain. Not for all projects it is needed and in some things it only hinders as it seems to me. What exactly can I say to the team must quickly in the topic appear and give answers.
|
|
|
|
black coffe
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 09, 2018, 11:21:26 AM |
|
Interesting enough. Got to consider joining now. i remember you tlked about this feature possibility in one of the intervews. Great that you decided to add it after all. Any plans for future development? 
|
|
|
|
black coffe
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 09, 2018, 09:42:14 PM |
|
Conception looking nice/ Let's see.
How long the ICO will be?
|
|
|
|
nbobo
Newbie
Offline
Activity: 19
Merit: 0
|
 |
July 10, 2018, 02:30:21 AM |
|
Note, i can't see airdrop?
|
|
|
|
Dima.Lik
Newbie
Offline
Activity: 145
Merit: 0
|
 |
July 10, 2018, 04:00:48 AM |
|
Hm.. What will be your main goal? 3D or all the other tasks?
|
|
|
|
greatwall85
Newbie
Offline
Activity: 120
Merit: 0
|
 |
July 10, 2018, 04:04:11 AM |
|
how much is one token in presale/ private sale?
|
|
|
|
Arya Aditama
|
 |
July 10, 2018, 06:02:17 AM |
|
the total supply of coins on this project is very limited and I see the price increase when sales are high enough, I estimate this coin will be a lot of interest when listing in exchange, hopefully listing on top exchange
|
|
|
|
Gabriellla
Newbie
Offline
Activity: 216
Merit: 0
|
 |
July 10, 2018, 10:03:12 AM |
|
I think that this project is relatively doing a great job so far as they are growing faster as they are implementing methods that are actually going to work.
|
|
|
|
Kezan2
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 10, 2018, 01:33:24 PM |
|
Anyway, broadening the concept makes the project more attractive to most investors!
|
|
|
|
bummm
|
 |
July 10, 2018, 01:37:12 PM |
|
Quite an interesting and unusual project. Only in my opinion there is not enough good advertising to attract the attention of large investors and potential users.
|
|
|
|
Timur.brnd
Jr. Member
Offline
Activity: 148
Merit: 3
|
 |
July 10, 2018, 01:40:32 PM |
|
So, your project will develop system for processing data (video, audio, science info), not only slicing 3D models? I think your project has big future.
It definitely does! For now the most popular project like this was Sonm, but there should be more of these to benefit different kinds of needs. Have you considered the fee amount for the tasks?
|
|
|
|
Bluddefenderman
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 10, 2018, 01:44:46 PM |
|
I remember, even NASA was thinking about using blockchain to secure the 3D printing of important details. So good for you, you're one step further 
|
|
|
|
Khicneog
Newbie
Offline
Activity: 46
Merit: 0
|
 |
July 10, 2018, 02:39:19 PM |
|
As far as I remember, in 3DES there wasn't any task to provide the safety of 3D models storage/transfer. It's about the tasks completing.
|
|
|
|
Lionedi
|
 |
July 10, 2018, 02:45:21 PM |
|
Do you have any airdrop ?
I have never seen the fact that this project is undergoing the Airdrop. perhaps the team has not yet decided whether or not to run the Airdrop.
|
|
|
|
Dmitr.g
Newbie
Offline
Activity: 176
Merit: 0
|
 |
July 10, 2018, 02:48:15 PM |
|
I saw the countdown of live ICO of this project and I worried because the amount being sold is around 787 coins only and there are a lot of remaining coins. Maybe the team should make some activities that will help to have some improvement in ico.
I guess that was a countdown to the end of a particular ICO round. In general ICO goes not bad.
|
|
|
|
potapo
Full Member
 
Offline
Activity: 462
Merit: 100
Your professional profile on the blockchain
|
 |
July 10, 2018, 02:51:27 PM |
|
I think theyshould move to DEX exchanges. They are close future trend.
I read in some sources that the team plans to release its token exactly on this exchange. and it may happen in the near future.
|
|
|
|
bluberry7
|
 |
July 10, 2018, 02:57:24 PM |
|
Since long ago, I've always wanted to have my hands on 3D printing, and i heard from my friend, that the printing process taking really long time do to the splicing of the model before it print. Now i meet this project that suppose to be fastening the splicing process, that way the 3D printing process will be faster.
Do you have an experience in 3d printing or models slicing? 3d modelling can be done with cutting costs. Excellent opportunities for any company. I think it can work. Who's the target audience here, companies or individuals?
|
|
|
|
3DesTeam
Full Member
 
Offline
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
|
 |
July 16, 2018, 10:16:26 AM |
|
Launching trades with a new token
The 3DES project is scaling up, announces a new token launch and the trade starts. At the moment the tokens are already listed on a decentralized exchange EtherDelta and soon will be listed on other exchanges. The 3DES team is actively developing the project. Stay tuned! exchange
|
|
|
|
wiss19
|
 |
July 17, 2018, 04:20:08 AM |
|
Since long ago, I've always wanted to have my hands on 3D printing, and i heard from my friend, that the printing process taking really long time do to the splicing of the model before it print. Now i meet this project that suppose to be fastening the splicing process, that way the 3D printing process will be faster.
Do you have an experience in 3d printing or models slicing? 3d modelling can be done with cutting costs. Excellent opportunities for any company. I think it can work. Who's the target audience here, companies or individuals? I think for this system has long been run but not many people know it and if the system is already widespread, many big companies dare to pay expensive to use it
|
| | | | | BIGGEST AND MOST TRUSTED FULLY LICENSED CRYPTO CASINO | | | | ▄▄▄▄█▄█▄▄▄▄ ▄█████████████▄ ███▀▀███████▀▀███ █▀ ▀█▀ ▀█ █████████████████████ █████████████████████ █████████████████████ ███████████████████ ███████████████████ █████████████████ ███████████████ ███████████ ▀▀███▀▀ | █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█ █ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ █ █ █ ▄ ███ ███ █ █▀▄▀█ ▄███▄ █ ███ ██▀▄▀█ █▀ ▀██▀█▀█▀██████ ██▀ ▀█ █ ▄▀▄▀▄███ ██ █ █ █ █▄█ ██ ██ █ █ █ ██ ██ ███ █ █ █ ██ ██ █ ▀▄ ▀▄██ ▄▀ ▄▀ ▀▄ ▀█▀ ▄▀ ▀▄ ▄▀ ▀▀▄▀▀ | ▀▄ ▄▀▄ ▄▀ █▄ ▀█▄▄▀▄▄█▀ ▄█ ▀█▀███▀███▀█▀ ▄█████████████▄ █████████████████ ███████████████████ █████████████████████ █████████████████████ ▀███████████████████▀ ▀█████████████████▀ ▀███████████████▀ ▀███████████▀ ▀▀▀█▀▀▀ | | SPANISH CLUBS OFFICIAL ASIAN BETTING PARTNER | │ | ACCEPT MULTIPLE CURRENCIES | │ | . JOIN US | │ |
|
|
|
gorconec12
Member

Offline
Activity: 189
Merit: 10
|
 |
July 17, 2018, 08:02:14 AM |
|
Good news! Am I right that token swap will be some time later after ICO finished?
|
|
|
|
black coffe
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 17, 2018, 12:58:03 PM |
|
Is it possible to use 3DES token for payments in your ecosystem?
|
|
|
|
iwasneverhere
|
 |
July 17, 2018, 01:01:23 PM |
|
The question is not whether to buy or not. The question is how much we will earn after going on the exchange with such baggage. Personally I'm waiting for X3-5
Well, it's not the purpose of a project. Every project has their own fundamental and some of them were actually need some time to hit exchange.
|
|
|
|
Julia26
Newbie
Offline
Activity: 157
Merit: 0
|
 |
July 18, 2018, 12:39:22 AM |
|
Etherdelta is small exchange, but it's good sign. Waiting for listing on huge exchanges.
|
|
|
|
dddudidd
Member

Offline
Activity: 392
Merit: 10
|
 |
July 18, 2018, 12:55:50 AM |
|
the allocation of bounty is very small, do not expect you will get more participants in your bounty campaign
|
|
|
|
Vladimir.eth
Newbie
Offline
Activity: 141
Merit: 0
|
 |
July 18, 2018, 03:22:33 AM |
|
What exchanges do you plan to reach in closest future?
|
|
|
|
jakezyrus00
|
 |
July 18, 2018, 03:39:34 AM |
|
Interesting and impressive project specially in the world of art and architecture. Also the reading materials is so much informative and user friendly. Keep it up and goodluck for the whole project.
|
|
|
|
3DESsupport
Newbie
Offline
Activity: 145
Merit: 0
|
 |
July 18, 2018, 08:13:02 AM |
|
Dear 3DES members! We’re glad to share that after the decision to scale up the project for increasing the liquidity of the assets, we decided to issue an additional token. The token is a futures instrument, nominally linked (1:1) to the main token. This token is listed on a decentralized exchange EtherDelta and we’re working on entering other exchanges. The additional token is available for purchase by new members. After the main token enters the market, the additional token holders will receive the main token automatically. https://forkdelta.github.io/#!/trade/0x115e7b7ecdd9792d6995cb426b2ef4d6119682a7-ETH We continue the active project development, we count on your support and we’re certain about the success. Best regards, the 3DES team
|
|
|
|
kolya.inc
Newbie
Offline
Activity: 125
Merit: 0
|
 |
July 18, 2018, 04:22:00 PM |
|
Scaling announcement and exchange listing is very important positive signal. Waiting more listings!
|
|
|
|
hussainshah7
Newbie
Offline
Activity: 148
Merit: 0
|
 |
July 18, 2018, 04:30:33 PM |
|
The 3D printing market is actively developing now and is strongly undervalued. However, the technology is already used in many production areas: from plastic toys to spaceship engines. The main advantage of 3D printing compared to the traditional production methods is its versatility. A 3D printer needs source raw material and a program with 3D printing instructions to make a wholesome item. This unique approach lowers the demand for building and maintaining large-scale assembly shops for a concrete item production.
|
|
|
|
Egor_F
Newbie
Offline
Activity: 174
Merit: 0
|
 |
July 19, 2018, 05:39:56 AM |
|
How will you proceed a token swap? Will you get any instruction?
|
|
|
|
Entonio
Newbie
Offline
Activity: 113
Merit: 0
|
 |
July 19, 2018, 11:15:33 AM |
|
Project is alive. Reached exchange before ICO.
|
|
|
|
Ilya.miy
Newbie
Offline
Activity: 157
Merit: 0
|
 |
July 20, 2018, 03:36:28 AM |
|
Do you advise any other crypto projects?
|
|
|
|
jakezyrus00
|
 |
July 20, 2018, 03:47:53 AM |
|
The 3D printing market is actively developing now and is strongly undervalued. However, the technology is already used in many production areas: from plastic toys to spaceship engines. The main advantage of 3D printing compared to the traditional production methods is its versatility. A 3D printer needs source raw material and a program with 3D printing instructions to make a wholesome item. This unique approach lowers the demand for building and maintaining large-scale assembly shops for a concrete item production.
Yeah it is already used by some manufacturing and production company which the main product is plastic. 3D printing is not just for making some project in college or for some thesis purposes but this 3D printing is already used in manufacturing industry.
|
|
|
|
KAZAKOV.TOM
Newbie
Offline
Activity: 124
Merit: 0
|
 |
July 20, 2018, 11:07:49 AM |
|
Do you plan to be listed on IDEX exchange?
|
|
|
|
cryptoroland
|
 |
July 20, 2018, 03:40:44 PM |
|
Great! DES on exchange! I keep tokens from autumn.
Yes, the project tokens are already on ForkDelta) And the price is pretty good. When there is a listing on other exchanges, the price will be even higher.🚀
|
|
|
|
jakezyrus00
|
 |
July 21, 2018, 04:17:21 AM |
|
What about other tasks apart from 3D models you mentioned in the first post? Will the project be interesting for 3D artists only or other users may invest too? Also, what about token trading, are you going to place coins on big exchanges? Sorry if answers are on your site, I can’t check it right now but think about investing. As the ICO ends tomorrow, it would be cool to get response ASAP. Thank you.
I think it is open to all who wants to be part of this project. Coz it is not only for 3D artist but it is also applicable in some manufacturing industry and maybe in construction industry also. Regarding to exchange listing, I guess all of the project are aiming to be listed on big exchange.
|
|
|
|
Den.3354
Newbie
Offline
Activity: 121
Merit: 0
|
 |
July 21, 2018, 08:16:08 AM |
|
I was doubt to buy DES tokens on ICO, but I will buy them on exchange)
|
|
|
|
3DESsupport
Newbie
Offline
Activity: 145
Merit: 0
|
 |
July 21, 2018, 08:27:40 AM |
|
Hello! According to the schedule, the ICO ends today. Although there was raised a relatively small amount of funds, we confirm our plans to scale up the project, which was described in the article https://medium.com/@3desteam/new-feature-of-3des-project-336cc45a672b Currently, our team is working on further project development, preparing the new version of White Paper with the detailed technical description and developing the modernized MVP version. After the end of ICO, our team is negotiating the listings of the main 3DES token on the exchanges. This issue requires time, that is why, considering scaling up the project, we have already launched the additional token to the decentralized exchange EtherDelta (ForkDelta) and negotiate to launch this token to other exchanges. In order to scale up the project, we are inviting new members to the team. Also, we negotiate about the partnership with a range of projects to strengthen our position before entering the exchanges. Follow our news, we will inform you about the updates. Best regards, 3DES team.
|
|
|
|
Onechel
Member

Offline
Activity: 148
Merit: 10
|
 |
July 21, 2018, 05:23:36 PM |
|
It's cool. What about Okex listing?
|
|
|
|
kamar25
Jr. Member
Offline
Activity: 161
Merit: 1
|
 |
July 21, 2018, 05:35:34 PM |
|
Such minimal resources, like what, you try to explain, because your explanation is just a piece of information
|
IRONX THE BEST IN TRADING | THE BEST IN CRYPTO Fully Regulated
|
|
|
Zinger09
Newbie
Offline
Activity: 136
Merit: 0
|
 |
July 21, 2018, 10:24:26 PM |
|
I think Okex is very huge exchange for them at this stage, them should to be listed on IDEX and Cryptopia at the begining. May be Liqui too.
|
|
|
|
luckyman0160
Member

Offline
Activity: 210
Merit: 13
|
 |
July 21, 2018, 10:26:02 PM |
|
I really like your whitepaper, it is very informative and interesting to read. Please tell me, when the token distribution will take place?
|
|
|
|
RUslan.U
Newbie
Offline
Activity: 114
Merit: 0
|
 |
July 22, 2018, 07:31:37 AM |
|
How to buy DES on forkdelta? How to use it do somebody know?
|
|
|
|
JENREM
|
 |
July 22, 2018, 07:36:25 AM |
|
I really like your whitepaper, it is very informative and interesting to read. Please tell me, when the token distribution will take place?
We have the same feeling as I ready everything in white paper. I understand everything. Let's wait for the them for them to be announced the possible distribution of the token.
|
|
|
|
Applejack1
Newbie
Offline
Activity: 47
Merit: 0
|
 |
July 22, 2018, 08:49:59 AM |
|
Is forkdelta safe exchange for trading?
|
|
|
|
icooker
Newbie
Offline
Activity: 120
Merit: 0
|
 |
July 22, 2018, 11:59:36 AM |
|
3D printing technology is high i=undervalued, but in future we all will use it. So, DES has nice growth potential.
|
|
|
|
Heleacce
Newbie
Offline
Activity: 72
Merit: 0
|
 |
July 22, 2018, 12:02:03 PM |
|
Nice concept, i hope this project will be succes. Good luck
|
|
|
|
Herocrypto
Newbie
Offline
Activity: 57
Merit: 0
|
 |
July 22, 2018, 02:54:40 PM |
|
Yes, I like interesting tokens with low capitalization. Will buy DES when it listed on more liquid exchange. Idex, for example.
|
|
|
|
kamar25
Jr. Member
Offline
Activity: 161
Merit: 1
|
 |
July 22, 2018, 03:12:54 PM |
|
I think you use blockchain well, developing computing capacity while looking for funds from cryptocurrency. I like it
|
IRONX THE BEST IN TRADING | THE BEST IN CRYPTO Fully Regulated
|
|
|
Global Progression
Newbie
Offline
Activity: 54
Merit: 0
|
 |
July 22, 2018, 04:25:40 PM |
|
Additional token is very interesting solution not to spend time when main token will be in the listing process.
|
|
|
|
kalehon
Member

Offline
Activity: 252
Merit: 10
|
 |
July 22, 2018, 04:26:42 PM |
|
This looks like so legit i do background check and search the team members and they are real in this kind of work or company.
|
|
|
|
poiseulle
Sr. Member
  
Offline
Activity: 448
Merit: 250
Provide high-quality Chinese translation
|
 |
July 22, 2018, 05:40:04 PM |
|
3D printing is already used in manufacturing industry is true, but will it really useful combined with blockchain?
|
|
|
|
CoinHunter22
Member

Offline
Activity: 151
Merit: 10
|
 |
July 22, 2018, 09:11:38 PM |
|
Did you think about pump communities for price boost?
|
|
|
|
Alexbzzzz
Jr. Member
Offline
Activity: 139
Merit: 1
|
 |
July 23, 2018, 04:27:38 AM |
|
I think you should to reach partnership with similar projects to get more trust and community activity.
|
|
|
|
quanbin27
Newbie
Offline
Activity: 51
Merit: 0
|
 |
July 23, 2018, 04:29:05 AM |
|
Good, pool talk should only be in mining section
|
|
|
|
JENREM
|
 |
July 23, 2018, 07:58:51 AM |
|
Do you plan to be listed on IDEX exchange?
I think the team are planning to be listed on the IDEX exchange maybe as of this time its still on the process by the team for them to be able to knw if IDEX is really hood for there exchange.
|
|
|
|
Algrinus
Newbie
Offline
Activity: 38
Merit: 0
|
 |
July 23, 2018, 01:44:16 PM |
|
Good looking solution with exchange listings now.
|
|
|
|
nhaila
|
 |
July 23, 2018, 01:59:20 PM |
|
Maybe it can find a better idea than Idex because the potential project is good enough to get into an executive officer expecange and maybe it'll help Developest the development of this project
|
|
|
|
Danil.P
Newbie
Offline
Activity: 135
Merit: 0
|
 |
July 23, 2018, 07:07:55 PM |
|
Yes, I think IDEX is really nice solution for ICO tokens.
|
|
|
|
kalehon
Member

Offline
Activity: 252
Merit: 10
|
 |
July 23, 2018, 07:08:25 PM |
|
Do you plan to participate in conferences and meetings with investors. Can you hear about your project from the speakers?
|
|
|
|
Valya_87
Member

Offline
Activity: 185
Merit: 10
|
 |
July 24, 2018, 07:01:03 AM |
|
I think they should partnership with other projects for boost.
|
|
|
|
usercryptomany
|
 |
July 24, 2018, 07:06:43 AM |
|
Let's IDEX or hitBTC to increase activity.
I agree with you . You need to transfer tokens to a respected exchanger to increase trust and activity . Any positive news about the exchanger will give an additional reason to buy .
|
|
|
|
Golovore[z]
Newbie
Offline
Activity: 52
Merit: 0
|
 |
July 24, 2018, 05:04:25 PM |
|
What is ICO price of this token?
|
|
|
|
quynhcoi
Newbie
Offline
Activity: 154
Merit: 0
|
 |
July 24, 2018, 05:19:26 PM |
|
I sustain this idea and hope it ought be prosperous. A very detailed and profitable job, certain plan. Good luck.
|
|
|
|
Pasha.ru
Newbie
Offline
Activity: 137
Merit: 0
|
 |
July 25, 2018, 02:21:49 AM |
|
How to use Etherdelta or Forkdelta?
|
|
|
|
woodywoodf
|
 |
July 25, 2018, 02:37:43 AM |
|
I think 3des token may have greate future. What about IDEX?
|
|
|
|
erzascalet
Newbie
Offline
Activity: 168
Merit: 0
|
 |
July 25, 2018, 02:46:50 AM |
|
Very interesting project, I look forward to the development of events. Good luck to you!
|
|
|
|
Timur.brnd
Jr. Member
Offline
Activity: 148
Merit: 3
|
 |
July 25, 2018, 02:53:03 AM |
|
Nice scaling conception. Seems devs will have success in it.
|
|
|
|
bebum
Newbie
Offline
Activity: 154
Merit: 0
|
 |
July 25, 2018, 02:53:42 AM |
|
Wow! What a great mission! This project is able to be successful from the very beginning!
|
|
|
|
jakezyrus00
|
 |
July 25, 2018, 12:21:05 PM |
|
This looks like so legit i do background check and search the team members and they are real in this kind of work or company.
Yeah I also did that and based on my research on those people, they are professional in this kind of industry and they already have a lot of experience that will contribute to develop and improve this project.
|
|
|
|
Vladimir.eth
Newbie
Offline
Activity: 141
Merit: 0
|
 |
July 25, 2018, 01:30:26 PM |
|
I want to buy, but I can't. What is actual gas price for ED exchange?
|
|
|
|
cryptodrunk
Member

Offline
Activity: 218
Merit: 10
|
 |
July 25, 2018, 01:38:32 PM |
|
I like the idea of your distributed 3d slicing, will you make a 3d repository of objects for purchase? You can merge a marketplace with a 3d slicing service, it would be great. If you can make parnertship with some 3d printing companies you will be able to do the entire process and really boost the 3d printing ecosystem. Cheers!
|
|
|
|
M@$ter Bit
Newbie
Offline
Activity: 28
Merit: 0
|
 |
July 25, 2018, 01:50:21 PM |
|
How scaling will affect the token price? Positively if all is ok.
|
|
|
|
profall
Full Member
 
Offline
Activity: 298
Merit: 100
dApps Development Automation Platform
|
 |
July 25, 2018, 02:10:15 PM |
|
with project like your, while had 421,381.526 tokens sold, ForkDelta is too small exchange. Do you have plan to list any other exchange?
|
|
|
|
Kirill1322
Newbie
Offline
Activity: 133
Merit: 0
|
 |
July 25, 2018, 04:33:04 PM |
|
We want to buy some tokens if it will be on IDEX.
|
|
|
|
kickstarter
|
 |
July 25, 2018, 04:35:32 PM |
|
Great project! Waiting for some big partnerships to be announced  Maybe I'm way too optimistic for no good reason, but I think that 3DES is the best one right now, buying some tokens as I'm typing this down
|
|
|
|
VityalyaVik
Newbie
Offline
Activity: 150
Merit: 0
|
 |
July 25, 2018, 06:06:21 PM |
|
ICO has ended. Fundraising wasn't very successful, but it nice that team don't plan to abandon the project.
|
|
|
|
Polianna
|
 |
July 25, 2018, 06:13:17 PM |
|
ICO is finished 421,381.526 tokens sold
You didn't have a soft cap? Because, I don't think that those people who invested here are glad that their money are frozen for long time, because with so pure ICO you won't have money for quick development.
|
|
|
|
woodywoodf
|
 |
July 25, 2018, 11:24:17 PM |
|
I noticed that fine projects don't have a good start, but then become huge. Maybe 3DES is such project? I see here much potential.
|
|
|
|
necromastery
|
 |
July 25, 2018, 11:36:34 PM |
|
with project like your, while had 421,381.526 tokens sold, ForkDelta is too small exchange. Do you have plan to list any other exchange?
I'm sure that's the very first thing the 3des team thinks. It seem amazing if the team is able to run his project with sufficiently funds collected during ICO, something extraordinary does not always start well. If the team does not want to, maybe they already abandoned this project. Hopefully team keep spirit on developing it.
|
|
|
|
Bluddefenderman
Newbie
Offline
Activity: 53
Merit: 0
|
 |
July 27, 2018, 09:45:45 AM |
|
Do u plan to partnership with Sonm?
|
|
|
|
jakezyrus00
|
 |
July 27, 2018, 02:55:27 PM |
|
I noticed that fine projects don't have a good start, but then become huge. Maybe 3DES is such project? I see here much potential.
Of course, everything can happen, the more potential it will develop later if you know how to invest. Yeah right, in every business no one can surely predict what will happen next. All of those conclusion will change when the actual business is already running. It is just a matter of how the team will handle such scenario.
|
|
|
|
catterpillar1
Newbie
Offline
Activity: 45
Merit: 0
|
 |
July 30, 2018, 07:52:15 AM |
|
I see that devs are working. When will you update MVP?
|
|
|
|
usercryptomany
|
 |
July 30, 2018, 08:01:15 AM |
|
You need to transfer your token to as many exchanges as possible . It is desirable that the exchange was known and centralized-it will give a great impetus to the growth of prices .
|
|
|
|
Zarir
Newbie
Offline
Activity: 116
Merit: 0
|
 |
July 30, 2018, 08:44:34 AM |
|
I think that 3DES has more prospects that many ICO done. So, I keep DES from presale.
|
|
|
|
thanhtuan1413000
Newbie
Offline
Activity: 98
Merit: 0
|
 |
July 30, 2018, 08:53:01 AM |
|
I should support this project because I see a good potential on it. Goodluck to the developers of this project. A successful project with an excellent idea, a world that is necessary and great potential! I am confident that the company has a great future and great prospects
|
|
|
|
VityalyaVik
Newbie
Offline
Activity: 150
Merit: 0
|
 |
July 31, 2018, 09:46:39 AM |
|
Project nice, but we need wait listing on huge exchanges. It make take 1-2 months at least.
|
|
|
|
andera
Newbie
Offline
Activity: 21
Merit: 0
|
 |
July 31, 2018, 09:56:14 AM |
|
The 3DES project is scaling up, announces a new token launch and the trade starts but that same for new users?
|
|
|
|
IRUS.LS
Newbie
Offline
Activity: 108
Merit: 0
|
 |
July 31, 2018, 10:57:44 PM |
|
Your MVP is centralized. It will be much interesting to see your client soft version.
|
|
|
|
secdark
|
 |
July 31, 2018, 11:08:59 PM |
|
Your MVP is centralized. It will be much interesting to see your client soft version.
Yah, MVP will useful for the project to augment the prospect potential investors and helpful for the cryptocurrency market to actively use in their daily activities. Surely they intercounter a lot of informations from the end users in return to improve and enhance properly the product.
|
|
|
|
Amhirishese
Newbie
Offline
Activity: 43
Merit: 0
|
 |
July 31, 2018, 11:15:42 PM |
|
What about video rendering tasks on your platform on its scaled version?
|
|
|
|
poiseulle
Sr. Member
  
Offline
Activity: 448
Merit: 250
Provide high-quality Chinese translation
|
 |
July 31, 2018, 11:26:51 PM |
|
though road map and design looks great, I still can't think of reason why 3d printing industry need blockchain technology
|
|
|
|
AnnaWillion
Copper Member
Newbie
Offline
Activity: 85
Merit: 0
|
 |
August 01, 2018, 09:58:41 AM |
|
Hi 3DES team! I’m writing you on behalf of Xebr exchange. We will be happy to add your coin.The process of implementation is very fast and for free. Please, learn our platform: https://xebr.com/Also we can help you to build your own exchange. Let’s find the best way of cooperation! Contacts: anna.n@xebr.comOr PM me here Have a good day)
|
|
|
|
lanangejagat
Full Member
 
Offline
Activity: 300
Merit: 100
“Blockchain Just Entered The Real World”
|
 |
August 01, 2018, 12:17:29 PM |
|
How release of the additional token will affect main token? Such events are serious. I think you can pump token.
|
|
|
|
Kevinatin
|
 |
August 01, 2018, 12:32:49 PM |
|
In pinned message of main telegram channel says, that there are already agreements with exchanges apart ForkDelta. What exchanges are developers talking about and when expect a listing?
|
|
|
|
ManesenciLee
Newbie
Offline
Activity: 44
Merit: 0
|
 |
August 01, 2018, 12:56:38 PM |
|
I think they don't distribute tokens now, cos they don't want to fall it before exchange trading. So, they waiting liquid exchange for it. It's good job.
|
|
|
|
grossmasterk
Member

Offline
Activity: 195
Merit: 11
|
 |
August 04, 2018, 02:28:39 AM |
|
What about coinexchange listing?
|
|
|
|
luksbit
|
 |
August 04, 2018, 02:34:54 AM |
|
These 3D models will be printed in 3D format, fast and inexpensive but how will this cost be reduced to the user? Will a new type of printer be developed to keep these costs low?
|
|
|
|
Kirill1322
Newbie
Offline
Activity: 133
Merit: 0
|
 |
August 04, 2018, 04:38:20 AM |
|
Is your token on Coinmarketcap radars?
|
|
|
|
kagtaviy_mo
Member

Offline
Activity: 322
Merit: 22
|
 |
August 04, 2018, 04:45:38 AM |
|
Hello. An interesting project in today's information world it will be very useful. Attracts the fact that the volume of exchange of models has increased. Good luck.
|
Full Member Preview: 》》》VANM - VIRAL ADVERTISING NETWORK MINING《《《 LIGHTPAPER ☆ WHITEPAPER ☆ TOKEN SALE Telegram Channel | Telegram Community | Twitter | Facebook | Instagram | Airdrop | Bounty Code: Code: Sr Member. Hero Member. Legendary Preview: 》》》VANM - VIRAL ADVERTISING NETWORK MINING《《《 LIGHTPAPER ☆ WHITEPAPER ☆ TOKEN SALE Telegram Channel | Telegram Community | Twitter | Facebook | Instagram | Airdrop | Bounty Code: Code:
|
|
|
|
rozy_cash
Newbie
Offline
Activity: 164
Merit: 0
|
 |
August 04, 2018, 06:02:05 AM |
|
I think you should to write requests to all exchanges and wait answer.
|
|
|
|
ALWASA
Sr. Member
  
Offline
Activity: 414
Merit: 250
BITDEPOSITARY - Make ICO's , More Secure
|
 |
August 04, 2018, 06:11:15 AM |
|
though road map and design looks great, I still can't think of reason why 3d printing industry need blockchain technology
They also have their own reason why at this point in time they were still needing blockchain technology because maybe through that they will be able to get through easily towards cryptocurrebcy. Lets need to support them.
|
|
|
|
woodywoodf
|
 |
August 04, 2018, 06:52:36 AM |
|
3D printing is interesting tech, but not enough for growing. I see that team decided to scale the project and it's right.
|
|
|
|
TonyRaut
Full Member
 
Offline
Activity: 378
Merit: 100
Your professional profile on the blockchain
|
 |
August 04, 2018, 07:07:06 AM |
|
Project nice, but we need wait listing on huge exchanges. It make take 1-2 months at least.
where do you know such a deadline? I have not heard anything about it before. Already have official information about the terms already?
|
|
|
|
Bluddefenderman
Newbie
Offline
Activity: 53
Merit: 0
|
 |
August 04, 2018, 09:19:02 AM |
|
How many tokens are reserved for scaling?
|
|
|
|
BuE22
Newbie
Offline
Activity: 17
Merit: 0
|
 |
August 04, 2018, 09:24:59 AM |
|
HM that  to have 0.283 ued per coin rate and also earn 70% OF BOUNCE AFTER 4 HOURS OF WORK.
|
|
|
|
Marat.Saf
Newbie
Offline
Activity: 140
Merit: 0
|
 |
August 04, 2018, 09:34:22 AM |
|
I've bought 10k tokens on presale and keep them now. 3DES has prospects - especially after scaling announcement.
|
|
|
|
CryptoCraudfounding
Newbie
Offline
Activity: 40
Merit: 0
|
 |
August 04, 2018, 09:40:35 AM |
|
Are you interested in partnership with investments pools?
|
|
|
|
Kirill1322
Newbie
Offline
Activity: 133
Merit: 0
|
 |
August 04, 2018, 11:49:38 AM |
|
Crypto market is going down again. I hope that we'll have bullish trend untill the end of 2018 for altcoins.
|
|
|
|
cryptoroland
|
 |
August 04, 2018, 11:54:34 AM |
|
Crypto market is going down again. I hope that we'll have bullish trend untill the end of 2018 for altcoins.
All August, most likely, we will fall, the market can turn green only in the beginning of autumn. The market will be bullish only when there are almost no optimists left =)
|
|
|
|
decibel1337
|
 |
August 04, 2018, 12:56:17 PM |
|
Hahaha, for some reason, I thought this project was related to 3DS, not 3D printing  What can I say? Everything has been said before, over and over again – I do think that this project has a great future ahead of it 
|
|
|
|
focacho1
|
 |
August 04, 2018, 11:56:32 PM |
|
I keep some DES from it's presale and see great future of this project. It will be developed, maybe slow, but they will achieve all goals.
|
|
|
|
olivierle
Newbie
Offline
Activity: 6
Merit: 0
|
 |
August 05, 2018, 02:49:56 PM |
|
The First Decentralized 3D Printing that assume progress day by bound in up coming days.
|
|
|
|
kickstarter
|
 |
August 06, 2018, 10:18:25 AM |
|
Did my research: everything seems legit enough for me to try and invest in 3DES. I mean, why not? If the team is legit, I don't really think anyone has any doubts about 3D printing being profitable in the long run.
|
|
|
|
Victory21
Newbie
Offline
Activity: 47
Merit: 0
|
 |
August 06, 2018, 06:10:54 PM |
|
Market is shit now. I think them better to be listed after market starts to rise. In autumn.
|
|
|
|
jonytran
Newbie
Offline
Activity: 14
Merit: 0
|
 |
August 06, 2018, 06:18:51 PM |
|
I have not heard anything about it before. Already have official information about the terms already? 
|
|
|
|
FoxTol
Newbie
Offline
Activity: 124
Merit: 0
|
 |
August 06, 2018, 06:31:28 PM |
|
Hahaha, for some reason, I thought this project was related to 3DS, not 3D printing  What can I say? Everything has been said before, over and over again – I do think that this project has a great future ahead of it  What do you mean "3DS - not 3D printing"? What is 3DS?
|
|
|
|
Alexbzzzz
Jr. Member
Offline
Activity: 139
Merit: 1
|
 |
August 06, 2018, 06:33:37 PM |
|
Project nice, but we need wait listing on huge exchanges. It make take 1-2 months at least.
where do you know such a deadline? I have not heard anything about it before. Already have official information about the terms already? Exchange owners are very floppy guys. They may list token for several months and more. So, it's standart practice.
|
|
|
|
rozy_cash
Newbie
Offline
Activity: 164
Merit: 0
|
 |
August 06, 2018, 09:08:27 PM |
|
I think 3D printing will explode volumes 2-3 times next 5 years. So, 3Des has more than real chances to achieve boost.
|
|
|
|
wgd
Legendary
Offline
Activity: 1823
Merit: 1005
|
 |
August 06, 2018, 09:11:53 PM |
|
he project seems to be about an interesting topic, how much of the project's code is completed? will it be time with the roadmap?
The market is falling because its its natural cycle, I hope we are close to the bottom, or else ... there will be a lot of sadness
|
|
|
|
faspik4
Member

Offline
Activity: 178
Merit: 10
|
 |
August 06, 2018, 09:25:47 PM |
|
3D printing is interesting tech, but not enough for growing. I see that team decided to scale the project and it's right.
Yes, I follow this project and read an article too. I see nice possibilities for video rendering and etc.
|
|
|
|
DropNik
Newbie
Offline
Activity: 119
Merit: 0
|
 |
August 06, 2018, 09:27:47 PM |
|
though road map and design looks great, I still can't think of reason why 3d printing industry need blockchain technology
They also have their own reason why at this point in time they were still needing blockchain technology because maybe through that they will be able to get through easily towards cryptocurrebcy. Lets need to support them. Crypto and blockchain will atract more people to 3D printing technology at least and I see value here.
|
|
|
|
datguyian
|
 |
August 07, 2018, 09:03:49 AM |
|
Hahaha, for some reason, I thought this project was related to 3DS, not 3D printing  What can I say? Everything has been said before, over and over again – I do think that this project has a great future ahead of it  3D printing is insane. I heard these news that people now can start to print their own guns. I must say that this is a trend which I find extremely concerning. Anyone of us knows a psycho neighbor or anyone we wouldn't want to be able to print a weapon...
|
|
|
|
saimoooon
Member

Offline
Activity: 260
Merit: 10
|
 |
August 07, 2018, 09:13:15 AM |
|
Hello. An interesting project in today's information world it will be very useful. Attracts the fact that the volume of exchange of models has increased. Good luck.
What do you mean by this?
|
|
|
|
ManesenciLee
Newbie
Offline
Activity: 44
Merit: 0
|
 |
August 07, 2018, 09:15:14 AM |
|
Is your token on Coinmarketcap radars?
Coinmarketcap lists tokens if it reach 10.000$ daily volume on existing exchanges (that already listed on CMC).
|
|
|
|
bluberry7
|
 |
August 07, 2018, 09:17:17 AM |
|
When do you plan to distribute exchange tokens?
|
|
|
|
KnyazED
|
 |
August 07, 2018, 09:17:36 AM |
|
Hello. An interesting project in today's information world it will be very useful. Attracts the fact that the volume of exchange of models has increased. Good luck.
What do you mean by this? perhaps this person had in mind that the activity of selling tokens has now become more intense. that is, recently the tokens began to be sold more than before. however, I did not notice such a trend.
|
|
|
|
asdug
Newbie
Offline
Activity: 116
Merit: 0
|
 |
August 08, 2018, 12:13:28 PM |
|
Market is shit now. I think them better to be listed after market starts to rise. In autumn.
Maybe, you are right. This market is shit for trading start.
|
|
|
|
Bluddefenderman
Newbie
Offline
Activity: 53
Merit: 0
|
 |
August 08, 2018, 12:17:02 PM |
|
I have not heard anything about it before. Already have official information about the terms already?  That terms do you mean? They ended their ICO.
|
|
|
|
Kezan2
Newbie
Offline
Activity: 53
Merit: 0
|
 |
August 08, 2018, 07:31:05 PM |
|
Crypto market is sucks again! Why when BTC was growing last weeks altcoins were staying, but they are falling with BTC and now many alts are even lower that were when BTC was at 5800?
|
|
|
|
Oishijagung
Newbie
Offline
Activity: 89
Merit: 0
|
 |
August 08, 2018, 07:34:45 PM |
|
With the advent of a new feature that can create all being changed and doesn't make tired, I think this is a very good step.
|
|
|
|
Ponchik34
Newbie
Offline
Activity: 192
Merit: 0
|
 |
August 08, 2018, 07:48:03 PM |
|
he project seems to be about an interesting topic, how much of the project's code is completed? will it be time with the roadmap?
The market is falling because its its natural cycle, I hope we are close to the bottom, or else ... there will be a lot of sadness
They announced scaling. I think they will update whitepaper with roadmap too.
|
|
|
|
Valya_87
Member

Offline
Activity: 185
Merit: 10
|
 |
August 08, 2018, 07:51:37 PM |
|
Great project. I hope to see 3DES on top exchanges in future.
Maybe. In long term.
|
|
|
|
Kitty.Tanya
Newbie
Offline
Activity: 171
Merit: 0
|
 |
August 08, 2018, 07:55:06 PM |
|
Hahaha, for some reason, I thought this project was related to 3DS, not 3D printing  What can I say? Everything has been said before, over and over again – I do think that this project has a great future ahead of it  3D printing is insane. I heard these news that people now can start to print their own guns. I must say that this is a trend which I find extremely concerning. Anyone of us knows a psycho neighbor or anyone we wouldn't want to be able to print a weapon... You are mad, not technology. In USA every psycho can BUY any weapon. How many cases when this idiots made massacres in schools or cinemas? You can easier use knife or hatchet as weapon if you don't have gun. So, all is ok with 3D and other technologies.
|
|
|
|
piknik.ob
Member

Offline
Activity: 201
Merit: 10
|
 |
August 09, 2018, 07:01:58 AM |
|
I have not heard anything about it before. Already have official information about the terms already?  ICO has already ended. They listed token on Forkdelta DEX exchange and now working on listing further. https://forkdelta.github.io/#!/trade/0x115e7b7ecdd9792d6995cb426b2ef4d6119682a7-ETH
|
|
|
|
banerro
Newbie
Offline
Activity: 110
Merit: 0
|
 |
August 09, 2018, 07:05:30 AM |
|
Waiting for listing on huge exchanges and MVP developing.
|
|
|
|
RannyGG
Newbie
Offline
Activity: 37
Merit: 0
|
 |
August 09, 2018, 07:09:12 AM |
|
Is your token on Coinmarketcap radars?
Coinmarketcap lists tokens if it reach 10.000$ daily volume on existing exchanges (that already listed on CMC). Yes, it's their filter.
|
|
|
|
ostrovagaly
Member

Offline
Activity: 238
Merit: 10
|
 |
August 09, 2018, 03:21:37 PM |
|
I really like this project! I invested my money in it! I think that now it is a new trend and a new high-tech! in the crypt world there are very few such companies! I wish good luck to the team, and I will wait for a high interest rate of this project's profitability!
|
|
|
|
rey6te
Member

Offline
Activity: 148
Merit: 10
|
 |
August 09, 2018, 06:23:52 PM |
|
I think that next bullrun will happen not earlier than end of this year.
|
|
|
|
EggieR
Newbie
Offline
Activity: 168
Merit: 0
|
 |
August 09, 2018, 06:33:00 PM |
|
I think this is a very good project, but why do not you go to the DEX exchange? Think about it
|
|
|
|
rozy_cash
Newbie
Offline
Activity: 164
Merit: 0
|
 |
August 10, 2018, 12:08:55 PM |
|
When you're going to launch new MVP? I see that you have already work in github.
|
|
|
|
asradoni
|
 |
August 10, 2018, 12:17:48 PM |
|
I think this is a very good project, but why do not you go to the DEX exchange? Think about it
3DES already traded on EtherDelta (ForkDelta). Tow the team is negotiating with other exchanges, we need to wait for the announcement.
|
|
|
|
doge_shit666
Member

Offline
Activity: 350
Merit: 10
|
 |
August 12, 2018, 12:53:29 PM |
|
3DES is a decentralized, fast, easy, low-cost 3D printing system. In my opinion, there are features there because the project has connected the owners of 3D printers and computer idle. What measures can be used to connect them?
|
|
|
|
NEQATIF
Newbie
Offline
Activity: 60
Merit: 0
|
 |
August 12, 2018, 01:59:56 PM |
|
Don't hurry with listings. Markets are crashing more and more.
|
|
|
|
profall
Full Member
 
Offline
Activity: 298
Merit: 100
dApps Development Automation Platform
|
 |
August 12, 2018, 02:14:59 PM |
|
Reliable workers serve as trusted nodes. This is a tool to solve disputes between the 3DES network members. Only members who have been in the network for a long time and have a reputation of reliable and fair workers can serve as a trusted node in 3DES.
|
|
|
|
pacamobradillo
Member

Offline
Activity: 294
Merit: 10
|
 |
August 12, 2018, 02:35:44 PM |
|
At the moment the worker module is built on the linked technologies:
1. Docker 2. Celery 3. Slic3r
And a realization of central module API.
The worker’s container can be downloaded and launched on any computer in several copies. It is only necessary to enter the authorization data in the system and a certain configurations set.
This things are amazing, what are you looking for more? Invest to this project right now
|
|
|
|
KAZAKOV.TOM
Newbie
Offline
Activity: 124
Merit: 0
|
 |
August 12, 2018, 02:58:18 PM |
|
Do you plan to hire new developers to your team?
|
|
|
|
sattesuksornprom
Newbie
Offline
Activity: 1
Merit: 0
|
 |
August 12, 2018, 03:01:33 PM |
|
Looks nice. Looks professional team. Interesting project. slicing concept is looks cool.
|
|
|
|
Dmitr.g
Newbie
Offline
Activity: 176
Merit: 0
|
 |
August 13, 2018, 10:19:35 AM |
|
What about collaboration with 3D printing services?
|
|
|
|
rapidtech
Member

Offline
Activity: 151
Merit: 10
|
 |
August 13, 2018, 10:27:05 AM |
|
Don't hurry with listings. Markets are crashing more and more.
There are projects that go against the market trend but most fall in price upon listing. Listing might be easier while the market is down. When the bull market comes, exchanges tend to charge high listing fees.
|
|
|
|
BitByata
Member

Offline
Activity: 222
Merit: 10
|
 |
August 13, 2018, 02:34:11 PM |
|
Marketcap crashed again -15% a day
I think it will reversal next several days. It can't fall much more.
|
|
|
|
greenBEryin
Newbie
Offline
Activity: 70
Merit: 0
|
 |
August 13, 2018, 02:40:20 PM |
|
3DES is a decentralized, fast, easy, low-cost 3D printing system. In my opinion, there are features there because the project has connected the owners of 3D printers and computer idle. What measures can be used to connect them?
I've tested MVP. They have slicer to compute model.
|
|
|
|
MishCoin
Member

Offline
Activity: 196
Merit: 10
|
 |
August 14, 2018, 08:46:55 AM |
|
BTC dominance is so high today - 51% already.
|
|
|
|
datguyian
|
 |
August 14, 2018, 08:56:49 AM |
|
Hahaha, for some reason, I thought this project was related to 3DS, not 3D printing  What can I say? Everything has been said before, over and over again – I do think that this project has a great future ahead of it  3D printing is insane. I heard these news that people now can start to print their own guns. I must say that this is a trend which I find extremely concerning. Anyone of us knows a psycho neighbor or anyone we wouldn't want to be able to print a weapon... You are mad, not technology. In USA every psycho can BUY any weapon. How many cases when this idiots made massacres in schools or cinemas? You can easier use knife or hatchet as weapon if you don't have gun. So, all is ok with 3D and other technologies. You are talking nonsense. How about the massacre in Las Vegas with 50 killed people? What do you think how many that guy would have killed with a knife? Weapons are just bad if distributed and used within civil areas. And having printers that can produce weapons is dangerous as a lot of people have triggers in them which then might lead them to shooting someone while otherwise they wouldn't have had a gun. Accessibility is a dangerous thing.
|
|
|
|
MrGenry
Newbie
Offline
Activity: 32
Merit: 0
|
 |
August 15, 2018, 03:14:36 PM |
|
BTC dominance is so high today - 51% already.
Market is recovering now. So, I think soon BTC dominance will be lower 50%.
|
|
|
|
Onechel
Member

Offline
Activity: 148
Merit: 10
|
 |
August 16, 2018, 02:08:12 PM |
|
I think project scaling will boost it. Waiting more.
|
|
|
|
Sharkzz1
Sr. Member
  
Offline
Activity: 881
Merit: 251
Think differently
|
 |
August 16, 2018, 02:08:18 PM |
|
BTC dominance is so high today - 51% already.
Market is recovering now. So, I think soon BTC dominance will be lower 50%. Less is better... he moves the market to the bottom, I'm shocked as other tokens lost their value...
|
|
|
|
Danil_k
Member

Offline
Activity: 205
Merit: 10
|
 |
August 16, 2018, 07:36:52 PM |
|
When new version of MVP will be released?
|
|
|
|
FromSmyrna
|
 |
August 16, 2018, 10:06:46 PM |
|
I joined this project in last year. I,m sure that I haven,t mistaken with it. Team is solid and develop this project.
|
|
|
|
smarshed
Newbie
Offline
Activity: 31
Merit: 0
|
 |
August 16, 2018, 10:07:19 PM |
|
I do not quite understand why buy this coin. I agree that the lack of equipment for mining is a good idea, but nevertheless, will it be as demanded and effective as the same bitcoin? what can you tell me about this?
|
|
|
|
Entonio
Newbie
Offline
Activity: 113
Merit: 0
|
 |
August 18, 2018, 05:31:58 AM |
|
I recommend you go to small exchanges like ddex.io or dex.top and etc.
|
|
|
|
Misha.point
Newbie
Offline
Activity: 122
Merit: 0
|
 |
August 18, 2018, 03:17:17 PM |
|
When new MVP release?
|
|
|
|
Haibui999
Newbie
Offline
Activity: 70
Merit: 0
|
 |
August 18, 2018, 03:18:59 PM |
|
when will the project be implemented?
|
|
|
|
Applejack1
Newbie
Offline
Activity: 47
Merit: 0
|
 |
August 18, 2018, 06:15:17 PM |
|
Market is bullshit, but it seems we reached reversal now.
|
|
|
|
KnyazED
|
 |
August 18, 2018, 06:15:27 PM |
|
BTC dominance is so high today - 51% already.
Market is recovering now. So, I think soon BTC dominance will be lower 50%. Less is better... he moves the market to the bottom, I'm shocked as other tokens lost their value... I do not even understand who to blame for the fact that the cost of tokens falls to the bottom. it is not clear. we all expect that everything will start to flourish and show good results.
|
|
|
|
Egor_F
Newbie
Offline
Activity: 174
Merit: 0
|
 |
August 19, 2018, 01:25:56 AM |
|
What with the process of listing?
|
|
|
|
mysong777
Newbie
Offline
Activity: 28
Merit: 0
|
 |
August 19, 2018, 01:26:51 AM |
|
Hey, I’m a data analyst at ICO Alert looking for additional information about the project. Is there an admin I can speak to?
|
|
|
|
saimoooon
Member

Offline
Activity: 260
Merit: 10
|
 |
August 19, 2018, 03:56:24 AM |
|
I support 3des from the start. Promising project for true holders.
|
|
|
|
doge_shit666
Member

Offline
Activity: 350
Merit: 10
|
 |
August 19, 2018, 04:05:12 AM |
|
3DES is a decentralized, fast, easy, low-cost 3D printing system. In my opinion, there are features there because the project has connected the owners of 3D printers and computer idle. What measures can be used to connect them?
I've tested MVP. They have slicer to compute model. Great! This will make the project more popular and the efficiency of the work better. Profitable dividends for 3D printer owners and computers will be a factor in attracting them.
|
|
|
|
so_stupid
Full Member
 
Offline
Activity: 448
Merit: 103
Bitgesell (BGL) Decentralized Cryptocurrency!
|
 |
August 19, 2018, 07:32:00 PM |
|
BTC dominance is so high today - 51% already.
Market is recovering now. So, I think soon BTC dominance will be lower 50%. Less is better... he moves the market to the bottom, I'm shocked as other tokens lost their value... so for sure, we will not see any trades of this token until bitcoin dominates. wait, hope and believe in 3des 
|
███████████ ███ ████ ❱ Ever wish you could turn back time to when BTC was $1? ████ ███ ███████████ B I T G E S E L L │ Decentralized Cryptocurrency ██ ████████ • Telegram • Twitter • Discord • Thread • ████████ ██
|
|
|
3DESsupport
Newbie
Offline
Activity: 145
Merit: 0
|
 |
August 20, 2018, 09:29:38 AM Last edit: August 20, 2018, 04:15:45 PM by 3DESsupport |
|
The 3DES product update
Dear 3DES project participants, Today we have good news to share with you: we’ve launched the expected MVP update.
The technical work description is provided below. We’re glad you have joined the project and offer you to test the updated product version.
At the mome | | |