[RE-ANN][FCK] ★FCKBANKS REBORN ★(New Devs and team) ★

[Spekske]

I tried that. It says no block source available.
Also I don't know much about these things.
I do have the new wallet though.
Eventhough I mined fcks and bought a lot in the past
I really am a noob so  I might be doing something fundamentally wrong.

Do you know where to find your fckbankscoin.conf file ? If yes, you should be able to add the line as mentioned in my previous message, if there is no fckbankscoin.conf file yet you can create one by using any plain text editor.

Yes I copied my previous conf file and updated with the new addnode

can you check which version wallet you have and what blockheight it is at? It's under help->debug windows->information

 v1.1.0.0-unk-beta    118900

That should work, you could try opening the console window, also under help->console and then enter:
addnode 84.29.56.160 add
(press enter to confirm after the above command)

and make sure p2p port 21779 is not being blocked by your firewall

Thanks syncing now

Very good !!! I'm currently re-indexing the blockexplorer and will launch the pool in a few hours with a bit of luck 

[1713308917]

1713308917

[Spekske]

I've just fired up the miningpool for FCK, feel free to give it a try. The blockexplorer is also available now.

Miningpool: http://fck.coincave.nl

Block explorer: http://coincave.nl:3601

We do need the community to get involved if we want to revive this coin. Maybe someone can have a go and get FCK listed somewhere, and a website would also be nice.

[Spekske]

I've just fired up the miningpool for FCK, feel free to give it a try. The blockexplorer is also available now.

Miningpool: http://fck.coincave.nl

Block explorer: http://coincave.nl:3601

We do need the community to get involved if we want to revive this coin. Maybe someone can have a go and get FCK listed somewhere, and a website would also be nice.

Re-indexing the blockexplorer one more time after a few new nodes updated the blockchain. After this has finished I will reset the poolserver too to reflect the correct blocks.

[Victorreach]

Hello! is the exchange of this coin?

[Spekske]

Hello! is the exchange of this coin?

It's up to the community to get FCK listed at an exchange. I have just updated the code with some extra checkpoints, the pool is being tested at this moment and the blockexplorer is also running.

Source https://github.com/Spekske/fckbankscoin
Miningpool http://coincave.nl
Blockexplorer http://coincave.nl:3601

[Spekske]

Hello! is the exchange of this coin?

It's up to the community to get FCK listed at an exchange. I have just updated the code with some extra checkpoints, the pool is being tested at this moment and the blockexplorer is also running.

Source https://github.com/Spekske/fckbankscoin
Miningpool http://coincave.nl
Blockexplorer http://coincave.nl:3601

Everything seems to be working fine this far, so feel free to join in. Block halving coming up in just over 15000 blocks.

[runner-f]

Any pool - conclave is in maintenance ?

[mneehon]

Holy FCK!  Re-starting my wallet, let's see if something is still alive.  Might even dust off Gridseed Orb for the occasion.

[Samsei]

Any active nodes?

[cienki77]

Any active nodes?

is it still alive? I need to dig out my old wallet

[cienki77]

Hello! is the exchange of this coin?

It's up to the community to get FCK listed at an exchange. I have just updated the code with some extra checkpoints, the pool is being tested at this moment and the blockexplorer is also running.

Source https://github.com/Spekske/fckbankscoin
Miningpool http://coincave.nl
Blockexplorer http://coincave.nl:3601

Everything seems to be working fine this far, so feel free to join in. Block halving coming up in just over 15000 blocks.

looks like the pool is in maintenance mode?

[cienki77]

If anyone wants to help me to bring FCK back to life I am still an owner of the official fck FB group. https://www.facebook.com/fckbanks/ (about 200 likes - not many but it can be a good start)

[Grimnir]

I tried that. It says no block source available.
Also I don't know much about these things.
I do have the new wallet though.
Eventhough I mined fcks and bought a lot in the past
I really am a noob so  I might be doing something fundamentally wrong.

Do you know where to find your fckbankscoin.conf file ? If yes, you should be able to add the line as mentioned in my previous message, if there is no fckbankscoin.conf file yet you can create one by using any plain text editor.

Yes I copied my previous conf file and updated with the new addnode

can you check which version wallet you have and what blockheight it is at? It's under help->debug windows->information

 v1.1.0.0-unk-beta    118900

That should work, you could try opening the console window, also under help->console and then enter:
addnode 84.29.56.160 add
(press enter to confirm after the above command)

and make sure p2p port 21779 is not being blocked by your firewall

Thanks syncing now

Very good !!! I'm currently re-indexing the blockexplorer and will launch the pool in a few hours with a bit of luck 

Node added, port opened, no block source.

[mneehon]

Wallet on my computer that used to run FCK is connected to 1-2 nodes right now.  Block height is 617445, much higher than the one on coincave.nl pool.  Unless I misunderstand something...  Not sure at this point what the most recent blockchain is, a bit afraid to reset mine to zero.  Client database folder has only three blockchain files, the latest dated October 2015, no new blocks since then.

[cienki77]

Wallet on my computer that used to run FCK is connected to 1-2 nodes right now.  Block height is 617445, much higher than the one on coincave.nl pool.  Unless I misunderstand something...  Not sure at this point what the most recent blockchain is, a bit afraid to reset mine to zero.  Client database folder has only three blockchain files, the latest dated October 2015, no new blocks since then.

Stay tuned, we expect some news in mid Dec.

[Twangy]

Wallet on my computer that used to run FCK is connected to 1-2 nodes right now.  Block height is 617445, much higher than the one on coincave.nl pool.  Unless I misunderstand something...  Not sure at this point what the most recent blockchain is, a bit afraid to reset mine to zero.  Client database folder has only three blockchain files, the latest dated October 2015, no new blocks since then.

Stay tuned, we expect some news in mid Dec.

I have about 2.2 billion fck  coins so can offer a lot to a dev if it helps

[btcgoods]

Wallet on my computer that used to run FCK is connected to 1-2 nodes right now.  Block height is 617445, much higher than the one on coincave.nl pool.  Unless I misunderstand something...  Not sure at this point what the most recent blockchain is, a bit afraid to reset mine to zero.  Client database folder has only three blockchain files, the latest dated October 2015, no new blocks since then.

Stay tuned, we expect some news in mid Dec.

Awesome! Oh wait... 

[xianwei82]

The coins developed in 2014 are also old coins, but I feel that the heat of concern seems to have passed. What does the developer do not do?

[cudjex]

Wallet on my computer that used to run FCK is connected to 1-2 nodes right now.  Block height is 617445, much higher than the one on coincave.nl pool.  Unless I misunderstand something...  Not sure at this point what the most recent blockchain is, a bit afraid to reset mine to zero.  Client database folder has only three blockchain files, the latest dated October 2015, no new blocks since then.

Stay tuned, we expect some news in mid Dec.

For the past two months, nothing has happened. Still so quiet?

[Spekske]

Let's first see if we can get a stable network running again. I have the following active nodes, so if anyone wants to hook up and help that would be a good start. We'll see if the nodes can agree on the correct blockheight  

addnode=66.66.116.180
addnode=62.59.168.89
addnode=85.214.92.213
addnode=82.39.133.102

Also please understand, there is NO developer currently. Anything we want to change, we have to do it as a community.

Once the nodes can agree on a common blockheight you can give mining a try, I have setup a temporary pool at the following url:

http://62.59.168.89:8082/

Port 3020 is vardiff and all other ports are fixed diff. Payments are processed every 30 minutes directly to your walletaddress. Unomp requires NO registration, just use your preferred miner, use your walletaddress as username and fill in anything as password, something like this:

cgminer --scrypt -o stratum+tcp://62.59.168.89:3020 -u walletaddresshere -p passwordanythingyoulike

I am also working on better stats since Unomp is lacking some crucial data, the first results can be seen on the following page, the stats will auto-refresh every 20 seconds and are live data from the pool and network.

http://62.59.168.89:8081/fckstats.php