lolMiner-144 0.38 Preview, Equihash 144.5 for AMD & Nvidia, Linux & Windows

[Ballysto]

I can also confirm now that my Vega 56 works on Windows 10 using the newly posted kernel renamed as gfx900.bin.  I also had to downgrade to the 17.12.2 drivers, I tried the 18.5.1 and 18.6.1 with no success using either kernel.

[1713441990]

1713441990

[1713441990]

1713441990

[ivomm]

Edit: I found the option DEVICES. Again the miner gave 0 sols and restarted automatically endlessly, until I closed it, opened it again and began mining with 18-20 sols per card. This is for the rigs with regular 3GB Tahiti 280x

That would be half of a GTX 1080 hashrate (according to what I read above) which is quite amazing for such old cards.

Expected to be honest, as even on "old" equihash 200,9 they were giving 285-320 sols per card ... but using => 200W of power

By default 220-230W, but with a bios undervolt they consume 180W (incl. risers) according to the watmeter. Still too much, of course, compared to the 570 and 580 esp.with bios mods.

[ivomm]

For my 280x's it works on adrenaline 18.x.x (windows 7), 17.12 (windows 10) and older crimson 15.12 (windows 8.1). Only for some reason (RAM issue, may be?) I have to restart the miner manually 2-3 times to begin mining. Speed is around 20 sols.

This morning I tested again. My RX 580 is working at 12 sols with accepted shares (adrenaline 18.x.x (windows 7)). All my 280x  give invalid solutions (17.12 (windows 10) and older crimson 15.12 (windows 8.1)). Those with 6GB even work at 70-ish sols which can't be true. 3GB work at 15-20 but never have accepted shares.

[muchoman]

For my 280x's it works on adrenaline 18.x.x (windows 7), 17.12 (windows 10) and older crimson 15.12 (windows 8.1). Only for some reason (RAM issue, may be?) I have to restart the miner manually 2-3 times to begin mining. Speed is around 20 sols.

This morning I tested again. My RX 580 is working at 12 sols with accepted shares (adrenaline 18.x.x (windows 7)). All my 280x  give invalid solutions (17.12 (windows 10) and older crimson 15.12 (windows 8.1)). Those with 6GB even work at 70-ish sols which can't be true. 3GB work at 15-20 but never have accepted shares.

I get invalid solutions also on 280x and pool shows miner offline.

[tomahutbui]

For my 280x's it works on adrenaline 18.x.x (windows 7), 17.12 (windows 10) and older crimson 15.12 (windows 8.1). Only for some reason (RAM issue, may be?) I have to restart the miner manually 2-3 times to begin mining. Speed is around 20 sols.

This morning I tested again. My RX 580 is working at 12 sols with accepted shares (adrenaline 18.x.x (windows 7)). All my 280x  give invalid solutions (17.12 (windows 10) and older crimson 15.12 (windows 8.1)). Those with 6GB even work at 70-ish sols which can't be true. 3GB work at 15-20 but never have accepted shares.

I get invalid solutions also on 280x and pool shows miner offline.

Yup, me too, i get invalid share from 280x and 7950

[Paulc2011]

The miner for me on my two 7970s ghz edition Just flat out crashes my whole pc after a couple minutes.
Also does not show in any mining pool any activity ? Any tips or ideas

[singlass]

The miner for me on my two 7970s ghz edition Just flat out crashes my whole pc after a couple minutes.
Also does not show in any mining pool any activity ? Any tips or ideas

mining just fine with my 7950's i had to remove all the kernels in the 144_5 folder and left only the Tahiti.bin,does it crash with other miners ? it sounds a lot like a hardware issue,the card overheating,or the PSU not able to supply the requested wattage

[Paulc2011]

The miner for me on my two 7970s ghz edition Just flat out crashes my whole pc after a couple minutes.
Also does not show in any mining pool any activity ? Any tips or ideas

mining just fine with my 7950's i had to remove all the kernels in the 144_5 folder and left only the Tahiti.bin,does it crash with other miners ? it sounds a lot like a hardware issue,the card overheating,or the PSU not able to supply the requested wattage

Hi no all other miners are fine even the old equpiool client ran perfect. Cards DNT get hot at all.  Psu is a gold rated Corsair 850w.ill see what happens when I remove all the other kernals..

[Racko]

The miner for me on my two 7970s ghz edition Just flat out crashes my whole pc after a couple minutes.
Also does not show in any mining pool any activity ? Any tips or ideas

mining just fine with my 7950's i had to remove all the kernels in the 144_5 folder and left only the Tahiti.bin,does it crash with other miners ? it sounds a lot like a hardware issue,the card overheating,or the PSU not able to supply the requested wattage

Hi no all other miners are fine even the old equpiool client ran perfect. Cards DNT get hot at all.  Psu is a gold rated Corsair 850w.ill see what happens when I remove all the other kernals..

My miner doesnt work also, on some pools says invalid solution and no share is accepted, on some it shows share accepted but it doesnt show anything on the pools miner stats, i think its problem in the miner, if anyone finds solution how to mine BTG on new algo post it here, thank

[minerbaba]

Code:

Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s

how to fix low difficulty share?

[Racko]

Code:

Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s

how to fix low difficulty share?

Also have that problem on 2miners.com pool, we need new miner, or fix for all 3GB cards

[willycut]

There is a problem with failover pools, after 5 attempt it goes to second pool correctly but miner restart saying Device 0 is stuck, so the loop continues and never mine, if i delete the failover it works, so my thoughts are while trying to connect to failed pools devices are not hashing so miner after some time think device is stuck and restart...

[kyputejib]

tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?

[JoenNL]

Code:

Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s

how to fix low difficulty share?

Also have that problem on 2miners.com pool, we need new miner, or fix for all 3GB cards

i think u guys are using the wrong COIN in your config json..
If u go mine BTCZ u must also enter BTCZ in that config..

[matbz]

Works well in one windows pc.
In other windows pc with 3 GPU the miner stop and close with a OpenCL.dll error.

Can you put a intensity option? The GPU is al 100% and can work with pc while mininig...

[ivomm]

tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?

Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.

[kyputejib]

tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?

Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.

all shares accepted, hashrate on pool is correct + - , (1100/1500 on 1050mV all with StilitBios win8.1&win10 15.12drivers).
I do not understand how tahiti can give such a hash. My 290/390 give 14-17sol/s on this miner.
390 too all shares accept hashrate 14-17, but what with overclock(1150/1400) what without (1050/1600) hashrate does not change.
p.s. if you see message opencl memory errors and reboot miner - increase the amount of virtual memory.
p.p.s. if you see stop your device (-4) run the second copy of miner in another window, but only for the card with which the first miner refuses to work. For example "DEVICES" : [1]

[Racko]

Code:

-------------------------------------------------
          Welcome to lolMiner-144.5 0.38
                 Public preview

   This software is only meant for pool mining
       with the Equihash 144.5 algorithm

For usage instructions add -h to the commandline.
          Made by Lolliedieb, June 2018
-------------------------------------------------
lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144.5
Auto selecting platform with id 0: AMD Accelerated Parallel Processing
Auto selecting all GPU in platform.
Using device with id 0 (AMD Radeon R9 200 Series)
Using device with id 1 (AMD Radeon R9 200 Series)
Using device with id 2 (AMD Radeon R9 200 Series)
Setup Miner...
Connecting to pool...
Connected to btg-eu.coinblockers.com:5555
Subscribed to stratum server
New target received: 0020000000000000000000000000000000000000000000000000000000000000
New job received: 68e
Authorized worker: GSYYfCLrMs5W1aUpKJxveKXT1YVhh8qK4A.lolMiner
Start Mining...
New job received: 68f
Submitting share
invalid solution
Warning: Share not accepted
Average speed (5s): 15.9521 sol/s | 14.9551 sol/s | 16.9492 sol/s Total: 47.8564 sol/s
Average speed (5s): 17.1486 sol/s | 15.1545 sol/s | 15.5533 sol/s Total: 47.8564 sol/s
Submitting share
invalid solution
Warning: Share not accepted
Submitting share
invalid solution
Warning: Share not accepted
Average speed (5s): 14.7557 sol/s | 18.7438 sol/s | 17.1486 sol/s Total: 50.6481 sol/s

I'm getting this and my json file is like this. running 3x R9 280x 3GB. anyone has a solution?

Code:

{
"DEFAULTS" : {
"PLATFORM"      : "AUTO",
"DEVICES"      : "AUTO"
},

"EXAMPLE2" :
{
"COIN" : "BTCZ",
"POOLS" : [
{"POOL" : "mine-btcz-euro.equipool.1ds.us",
"PORT" : "50061",
"USER" : "t1dbQvbohSUAGE6dZpUYru7e18SCNVipVXY.lolMiner",
"PASS" : "x"}
]
},

"EXAMPLE1" :
{
"COIN" : "BTG",
"POOLS" : [
{"POOL" : "btg-eu.coinblockers.com",
"PORT" : "5555",
"USER" : "GSYYfCLrMs5W1aUpKJxveKXT1YVhh8qK4A.lolMiner",
"PASS" : "x"},
{"POOL" : "btg.suprnova.cc",
"PORT" : "8866",
"USER" : "Lolliedieb.BitcoinGold",
"PASS" : "x"}
]
}
}

[Lolliedieb]

I get invalid solutions also on 280x and pool shows miner offline.

Hi there, may you share what driver you use? I will try to check why that one produces fault shares with the kernel

how to fix low difficulty share?

Single low diff shares can occur , but should be minority. If all are low diff shares some part of the miner does not work properly with your driver.


At all who have trouble with invalid shares:
Please share OS & Driver version. It seems my binary Kernels cause Problems on other then the blockchain drivers (whete they were compiled)


By the way: did anyone test with Nvidia how close to ewbf we are?

[Racko]

I get invalid solutions also on 280x and pool shows miner offline.

Hi there, may you share what driver you use? I will try to check why that one produces fault shares with the kernel

how to fix low difficulty share?

Single low diff shares can occur , but should be minority. If all are low diff shares some part of the miner does not work properly with your driver.


At all who have trouble with invalid shares:
Please share OS & Driver version. It seems my binary Kernels cause Problems on other then the blockchain drivers (whete they were compiled)


By the way: did anyone test with Nvidia how close to ewbf we are?

Using windows 10 with 22.19.659.0 driver version. any suggestion which drivers i should use?