lolMiner-144 0.38 Preview, Equihash 144.5 for AMD & Nvidia, Linux & Windows

[Paulc2011]

tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?

Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.

all shares accepted, hashrate on pool is correct + - , (1100/1500 on 1050mV all with StilitBios win8.1&win10 15.12drivers).
I do not understand how tahiti can give such a hash. My 290/390 give 14-17sol/s on this miner.
390 too all shares accept hashrate 14-17, but what with overclock(1150/1400) what without (1050/1600) hashrate does not change.
p.s. if you see message opencl memory errors and reboot miner - increase the amount of virtual memory.
p.p.s. if you see stop your device (-4) run the second copy of miner in another window, but only for the card with which the first miner refuses to work. For example "DEVICES" : [1]

im getting between 32-39 sols on my two 7970s

New job received: fdd7
Average speed (5s): 15.5502 sol/s | 18.5407 sol/s Total: 34.0909 sol/s
---------------------------------------------
Average speed (60s): 15.1808 sol/s | 16.5806 sol/s Total: 31.7614 sol/s
---------------------------------------------
Average speed (5s): 15.7811 sol/s | 17.3791 sol/s Total: 33.1602 sol/s
Average speed (5s): 13.7972 sol/s | 15.7968 sol/s Total: 29.5941 sol/s
Average speed (5s): 17.3896 sol/s | 15.3908 sol/s Total: 32.7803 sol/s
Average speed (5s): 16.3803 sol/s | 20.7751 sol/s Total: 37.1554 sol/s
Submitting share
Share accepted
Average speed (5s): 17.1486 sol/s | 16.9492 sol/s Total: 34.0977 sol/s
Average speed (5s): 15.5751 sol/s | 15.9744 sol/s Total: 31.5495 sol/s
Average speed (5s): 17.5544 sol/s | 18.7512 sol/s Total: 36.3056 sol/s
Average speed (5s): 13.5756 sol/s | 18.1673 sol/s Total: 31.7429 sol/s
Average speed (5s): 17.9677 sol/s | 14.5738 sol/s Total: 32.5414 sol/s
Average speed (5s): 18.3596 sol/s | 15.5658 sol/s Total: 33.9254 sol/s
New job received: fdd8
Average speed (5s): 16.5867 sol/s | 15.5875 sol/s Total: 32.1743 sol/s

but main problem is its not registering on any pools what so ever tried a lot know
seems to be running stable after deleting all the other kernals but still no pool progress

The Big question is where are all my accepted shares going as they are clearly not making it to the pool. is the dev fee set up correct or are all our shares going to the dev lol

Connecting to pool...
Connected to mine-btcz-euro.equipool.1ds.us:50061
Subscribed to stratum server
New target received: 0064000000000000000000000000000000000000000000000000000000000000
New job received: d735
Authorized worker: t1enCvVEbgszYs97KUKGZ3yGuzriRxJUhMG
Start Mining...
Average speed (5s): 16.5603 sol/s | 14.9641 sol/s Total: 31.5243 sol/s
Average speed (5s): 16.5669 sol/s | 15.5689 sol/s Total: 32.1357 sol/s
Average speed (5s): 17.1931 sol/s | 13.5946 sol/s Total: 30.7877 sol/s
Average speed (5s): 18.345 sol/s | 18.7438 sol/s Total: 37.0887 sol/s
Average speed (5s): 15.7496 sol/s | 17.7432 sol/s Total: 33.4928 sol/s
New job received: d736
Average speed (5s): 14.5854 sol/s | 12.3876 sol/s Total: 26.973 sol/s
Average speed (5s): 15.7937 sol/s | 19.992 sol/s Total: 35.7857 sol/s
Average speed (5s): 18.7812 sol/s | 16.983 sol/s Total: 35.7642 sol/s
Average speed (5s): 17.5789 sol/s | 17.5789 sol/s Total: 35.1578 sol/s
Average speed (5s): 19.369 sol/s | 13.5783 sol/s Total: 32.9473 sol/s

Feel free to check my equipool stats as you can see i am connected shares submitting and accepted just no pool progress what so ever

[1713432373]

1713432373

[1713432373]

1713432373

[1713432373]

1713432373

[1713432373]

1713432373

[1713432373]

1713432373

[1713432373]

1713432373

[Racko]

tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?

Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.

all shares accepted, hashrate on pool is correct + - , (1100/1500 on 1050mV all with StilitBios win8.1&win10 15.12drivers).
I do not understand how tahiti can give such a hash. My 290/390 give 14-17sol/s on this miner.
390 too all shares accept hashrate 14-17, but what with overclock(1150/1400) what without (1050/1600) hashrate does not change.
p.s. if you see message opencl memory errors and reboot miner - increase the amount of virtual memory.
p.p.s. if you see stop your device (-4) run the second copy of miner in another window, but only for the card with which the first miner refuses to work. For example "DEVICES" : [1]

im getting between 32-39 sols on my two 7970s

New job received: fdd7
Average speed (5s): 15.5502 sol/s | 18.5407 sol/s Total: 34.0909 sol/s
---------------------------------------------
Average speed (60s): 15.1808 sol/s | 16.5806 sol/s Total: 31.7614 sol/s
---------------------------------------------
Average speed (5s): 15.7811 sol/s | 17.3791 sol/s Total: 33.1602 sol/s
Average speed (5s): 13.7972 sol/s | 15.7968 sol/s Total: 29.5941 sol/s
Average speed (5s): 17.3896 sol/s | 15.3908 sol/s Total: 32.7803 sol/s
Average speed (5s): 16.3803 sol/s | 20.7751 sol/s Total: 37.1554 sol/s
Submitting share
Share accepted
Average speed (5s): 17.1486 sol/s | 16.9492 sol/s Total: 34.0977 sol/s
Average speed (5s): 15.5751 sol/s | 15.9744 sol/s Total: 31.5495 sol/s
Average speed (5s): 17.5544 sol/s | 18.7512 sol/s Total: 36.3056 sol/s
Average speed (5s): 13.5756 sol/s | 18.1673 sol/s Total: 31.7429 sol/s
Average speed (5s): 17.9677 sol/s | 14.5738 sol/s Total: 32.5414 sol/s
Average speed (5s): 18.3596 sol/s | 15.5658 sol/s Total: 33.9254 sol/s
New job received: fdd8
Average speed (5s): 16.5867 sol/s | 15.5875 sol/s Total: 32.1743 sol/s

but main problem is its not registering on any pools what so ever tried a lot know
seems to be running stable after deleting all the other kernals but still no pool progress

The Big question is where are all my accepted shares going as they are clearly not making it to the pool. is the dev fee set up correct or are all our shares going to the dev lol

Connecting to pool...
Connected to mine-btcz-euro.equipool.1ds.us:50061
Subscribed to stratum server
New target received: 0064000000000000000000000000000000000000000000000000000000000000
New job received: d735
Authorized worker: t1enCvVEbgszYs97KUKGZ3yGuzriRxJUhMG
Start Mining...
Average speed (5s): 16.5603 sol/s | 14.9641 sol/s Total: 31.5243 sol/s
Average speed (5s): 16.5669 sol/s | 15.5689 sol/s Total: 32.1357 sol/s
Average speed (5s): 17.1931 sol/s | 13.5946 sol/s Total: 30.7877 sol/s
Average speed (5s): 18.345 sol/s | 18.7438 sol/s Total: 37.0887 sol/s
Average speed (5s): 15.7496 sol/s | 17.7432 sol/s Total: 33.4928 sol/s
New job received: d736
Average speed (5s): 14.5854 sol/s | 12.3876 sol/s Total: 26.973 sol/s
Average speed (5s): 15.7937 sol/s | 19.992 sol/s Total: 35.7857 sol/s
Average speed (5s): 18.7812 sol/s | 16.983 sol/s Total: 35.7642 sol/s
Average speed (5s): 17.5789 sol/s | 17.5789 sol/s Total: 35.1578 sol/s
Average speed (5s): 19.369 sol/s | 13.5783 sol/s Total: 32.9473 sol/s

Feel free to check my equipool stats as you can see i am connected shares submitting and accepted just no pool progress what so ever

Same as me on Zhash.pro It says share accepted but on site it says 0 sols

[ivomm]

Hmm, the whole day my 580 had accepted shares and stats on the pool MPH were correct. For the last hours (4-5) however, the pool shows 0 sols and the miner is turned off in the workers page. Really strange, since I see only accepted shares.

[Paulc2011]

One thing i notice is the auto diff on poolside is always in the minus right now thats my difficulty Diff: -340 on ragnorpool im just going through all of them to see if any change but all are having the same result

[Paulc2011]

miner restarted went to  Diff: -5734 poolside lol

[rgzrgz]

the program stops. Windows 10 LTSB, Blockchain Crimson driver. 6 AMD asus 570/580 and 4 AMD Powercolor 570.

All gpu crashes!

[a.denis1]

I have
amd 7970
amd fury x
amd vega rx 64

If I run the miner without devices configuration is tell me the device 2 is not supported ( I suppose the 7970 )  .
If I set "DEVICES":[0,1]  it run on the 7970 and on the vega ! with about 100 sol !
If I set "DEVICES":[1,2] the miner tell me device 2 is not supported .

It seem there is a different device numbering  in the cfg and in the running process.

How can I solve the problem?

[Lolliedieb]

Some pools unfortunately send an accepted : true message although they rejected a share.
What you can try is suprnova pool - as far as I know that one is accurate in its response message.

Still it seems that R280 and HD7000 cards produse invalid shares. Thats not good and I do not know yet why, investigating it currently.
What confuses me is that the kernels were all build from same source and same driver but some do valid and some invalid result what is confusing as the code os very deterministic. (At least long as you set the "COIN" : "XYZ" section right the code should work... hmm)

I will try to find a better way to give kernels to you...

I have
amd 7970
amd fury x
amd vega rx 64

If I run the miner without devices configuration is tell me the device 2 is not supported ( I suppose the 7970 )  .
If I set "DEVICES":[0,1]  it run on the 7970 and on the vega ! with about 100 sol !
If I set "DEVICES":[1,2] the miner tell me device 2 is not supported .

It seem there is a different device numbering  in the cfg and in the running process.

How can I solve the problem?

Hu... the order changes? Thats odd. Will look into this. 100 is a bit too high - I assume some binary kernel problem again.
Its a pitty that there is no good IL for AMD kernels... hnmm

[senzujedi]

Unfortunately Vega 56 still does not work for me with the new kernel using the 18.6.1 driver under Windows 10, even if I renamed gfx901.bin to gfx900.bin

-------------------------------------------------
          Welcome to lolMiner-144.5 0.38
                 Public preview

   This software is only meant for pool mining
       with the Equihash 144.5 algorithm

For usage instructions add -h to the commandline.
          Made by Lolliedieb, June 2018
-------------------------------------------------
lolMiner is configured to mine BitcoinZ(BTCZ), Equihash 144.5
Auto selecting platform with id 0: AMD Accelerated Parallel Processing
Auto selecting all GPU in platform.
Using device with id 0 (Radeon RX Vega)
Setup Miner...
ERROR: Kernel kernels/144_5/gfx900.bin can not be build for your device 0(gfx900)
-11
Build Status: -2
Build Options:
Build Log: Error: AMD HSA Code Object loading failed.

Warning: Your device with id 0 is currently not supported by lolMiner-144.5
Error: lolMiner does not support any of the detected / selected devices algorithms on the selected algorithm.

[a.denis1]

I have
amd 7970
amd fury x
amd vega rx 64

If I run the miner without devices configuration is tell me the device 2 is not supported ( I suppose the 7970 )  .
If I set "DEVICES":[0,1]  it run on the 7970 and on the vega ! with about 100 sol !
If I set "DEVICES":[1,2] the miner tell me device 2 is not supported .

It seem there is a different device numbering  in the cfg and in the running process.

How can I solve the problem?

Hu... the order changes? Thats odd. Will look into this. 100 is a bit too high - I assume some binary kernel problem again.
Its a pitty that there is no good IL for AMD kernels... hnmm

There was others miners that gave me the same problem ...
It can be a good solution if it is possible force to run on devices 1,2 so it will run on fury and vega .
Can you let to force the execution on devices?
Thank you very much

[Dr_Thrax]

I have the following situations with my 2 rigs:

Rig 1: 2 R9 390, 1 R9 Fury, 2 GTX 1070, 1 GTX 1060, only recognize AMD platform, and mine good. Windows 10 Pro 1709 Blockchain Driver AMD, and Geforce 391.35 nvidia GPUs.

Rig 2: 3 RX 580, 1 RX 480, 1 RX 570, 1 R9 290, miner closes and restarts in a infinite bucle, sometimes the rig crashes. Windows 10 Pro 1709 Blockchain Driver. GPUs are NOT modded.

Any help thanks. I will update Geforce Drivers for Rig 1, it is so old, and try again.

[MWallet_team]

Good job. I'm waited amd miner 144_5 for last weeks.
So i tested it on my rig with 5x RX580(4gb) (win10) and blockchain driver
When it starts i see temperature of all gpus growing, then it shows that 2 first gpus found sol's and others are 0. miner wathchdog(?) printed something like - gpu 2 hangs miner restarts. This moment temperature of all gpus going down. Maybe there are any command to disable watchdog?
Then i tested it on my 11 gpu (same RX580 4gb) win10 , but other driver and i see the same problem. after first gpu found solution others still shows 0 sols and miner restarts...
[upd]
Tested different instances of miner first with config - "DEVICES"         : [0,3,4]  other [1,2]  ,but it didn't help. Anyway i can't mine with nore than 3 gpu's..

[Lolliedieb]

I have the following situations with my 2 rigs:

Rig 1: 2 R9 390, 1 R9 Fury, 2 GTX 1070, 1 GTX 1060, only recognize AMD platform, and mine good. Windows 10 Pro 1709 Blockchain Driver AMD, and Geforce 391.35 nvidia GPUs.

Rig 2: 3 RX 580, 1 RX 480, 1 RX 570, 1 R9 290, miner closes and restarts in a infinite bucle, sometimes the rig crashes. Windows 10 Pro 1709 Blockchain Driver. GPUs are NOT modded.

Any help thanks. I will update Geforce Drivers for Rig 1, it is so old, and try again.

As for rig1:

To run it on Nvidia test out the "PLATFORM" parameter in the config file. Allowed entries are: "PLATFORM":"AUTO" and "PLATFORM":<anyNumber>.
In the 2nd case see that there are no parentesis. Wjen it is "AUTO" the miner will select the driver with the most GPUs in your system. When its a number N it will run on the Nth found OpenCL driver in your system, so you can use that to switch between AMD and Nvidia (note: there can be also Intel drivers out there, so can be that you have to test numbers 0 to 2.)

As for rig 2: can you open command line, go to lolMiner directiory and run lolMiner-144.exe -benchmark=BTG? Then it will try to do a BTG test run on your system. If it failes you can then see the error message without the script restarting the miner infinitely often.

[Lolliedieb]

Good job. I'm waited amd miner 144_5 for last weeks.
So i tested it on my rig with 5x RX580(4gb) (win10) and blockchain driver
When it starts i see temperature of all gpus growing, then it shows that 2 first gpus found sol's and others are 0. miner wathchdog(?) printed something like - gpu 2 hangs miner restarts. This moment temperature of all gpus going down. Maybe there are any command to disable watchdog?
Then i tested it on my 11 gpu (same RX580 4gb) win10 , but other driver and i see the same problem. after first gpu found solution others still shows 0 sols and miner restarts...
[upd]
Tested different instances of miner first with config - "DEVICES"         : [0,3,4]  other [1,2]  ,but it didn't help. Anyway i can't mine with nore than 3 gpu's..

The miner needs a lot of (virtual) memory on startup for AMD, what is a driver issue. More Precisely the AMD graphic driver in Windows starts to allocate the same memory in system Ram as needed by the GPU in the beginning, which is 2.9G at the moment. So if your rig has 8G of Ram you can max start AMD 3 GPUs.

That said what could work for you:
A) Start the miner on first 3 GPUs and wait / monitor in task browser until the mem consumption went down (which it slowly does over time)
B) Set your Windows swap (page ) file to a large fixed size, i.e. 36G, so the system thinks it has enough virtual memory. Some ethereum miners had that problem, too, so there are some good instructions around how to do that.

[tomahutbui]

gpu: 7950 (7900 series)
window 10 1709
amd driver blockchain 18.5.1

INVALID SOLUTION

and R7 370 not support

[seventux]

Hello, can you put it in mega or any sharing platform? Google drive doesn't work for me. It says contain virus and can't download it.

Thank you

[Paulc2011]

This is what i get on supernova

low difficulty share of 0.062499046325683594
New job received: 37ac
Average speed (5s): 16.1515 sol/s | 16.9492 sol/s Total: 33.1007 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 17.5474 sol/s | 18.5444 sol/s Total: 36.0917 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 15.3539 sol/s | 16.9492 sol/s Total: 32.3031 sol/s
Average speed (5s): 15.5533 sol/s | 19.5414 sol/s Total: 35.0947 sol/s

[deepward]

win7 7950 950/1500
have tried on blockchain 17.30 and on adrenalin 18.10.16

submitting share
invalid solution



average speed ~ 10 sols although not sharing properly

edit:
changed pool, to suprnova
 still getting low difficulty share of 0.062499046325683594



tried on different rig on win10 with a variety of 7950, r9 280x on blockchain  17.40

device 0 stucked
shutting down miner

tried with DEVICES skipping the "0"
won't even start

{
   "DEFAULTS" : {
      "PLATFORM"         : "AUTO",
      "DEVICES"         : "1,2,3"    
   },

   "EXAMPLE1" :
   {
      "COIN" : "BTG",
      "POOLS" : [
         {"POOL" : "solo-eu.btgpool.pro",
          "PORT" : "3859",
          "USER" : "GbWB8KWxyzcy3fnqdDKptevq8qQ62yBDCN.rig1",
          "PASS" : "x"}


 

[shumway]

will not let me download from google drive says virus how ca n i download this

[deepward]

here's the dload link

https://mega.nz/#!swJjCIBR






!PNV42VKqZWoizZzR8XVzHDiKbjyLsWg4ZW3RjWkA7j0