Coin is hard to mine! And the miner is a bit unstable. Do at your own risk! Donations accepted :
Riecoin: RHWFuugM3oQ5h9VsQCTt9R5M3FWzo7UM3N
Datacoin: D9myVoDFPhjWLMrKx7Ag6gH7Y3A6V441cT
Difficulty goes up fast!
1) Please use my referral
https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 13.10 64x .It must be 1GB or more. You can create up to 5 droplets.
2) Connect with putty using using ip and password or just write those in the console. 1 putty per droplet! You can always download putty from here
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty is better cause you can copy paste everything:
----------------------------------------------------------------------------------------------------------------------------
sudo apt-get update
sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev
sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix
git clone
https://github.com/clintar/xptMinercd xptMiner
nano Makefile
Change the word native to corei7 both here:
CFLAGS += -march=native
and here:
CXXFLAGS += -march=native
Then press Ctrl X and then hit Y and hit enter.
make -f Makefile
cd
screen -S rie ./xptMiner/xptminer -o
http://ypool.net -u
papari.do1 -p
do1 -t 4
And you are now mining! Of course change to your worker username and password! The ones that you have made on ypool webpage (which is down right now due to DDoS)
If you want to close putty you have to first press Ctrl A and then D and you can now safely close putty without stopping mining. However since miner is unstable you should probably monitoring it in case it stops.
When you open again putty you just type screen -r and you can see the miner again.
If you have any problems please ask here so others can see the replies!
Ran this on Ubuntu 12.04 LTS on a VPS via Putty. My question is the "-t 4" can I leave that out and still have the same efficiency? Or do I need to include the -t command? I am assuming that is the thread count.