lolMiner 1.64: Fastest Kaspa miner in market

[EthosRIG]

Finally managed to configure zombie-mode properly. Getting 24 MH/s with RX580 4GB cards at current ETH epoch.

24mhs maybe till yesterday. Now in the new epoch I am getting 22mhs more or less.
Cards impossible to find at normal prices. Before this crazyness I didn't close a deal for 10 EUR per card...what a stupid idea ahahah

Which configuration line do you use for the 22Mhs?.

It would be helpful to have some lines to see the different config files

this is the miner command generated by ethos:

su - ethos -c "/usr/bin/screen -c /opt/ethos/etc/screenrc.lolminer -l -L -dmS lolminer /opt/miners/lolminer/lolMiner --profile ETHOS --json /var/run/ethos/lolminer_config.json --devices 0,1,2,3,4,5 --4g-alloc-size 4080 --zombie-tune 2  "

this is the json file:

{
    "DEFAULTS": {
        "DEVICES": "AMD",
        "APIPORT": 42042
    },
    "ETHOS": {
        "COIN": "ETH",
        "POOLS": [
            {
                "POOL": "eu1.ethermine.org",
                "PORT": "4444",
                "USER": "MY_EMPTY_ADDRESS",
                "PASS": "x",
                "TLS": "0"
            }
        ]
    }
}

This is ethos config file:

maxgputemp 80
stratumproxy enabled
proxywallet MY_VERY_VERY_VERY_EMPTY_ADDRESS
proxypool1 eu1.ethermine.org:4444
poolpass1 x
fan 733d0f 20 35 30 35 35 40
globalminer lolminer
lolminer=flags --4g-alloc-size 4080 --zombie-tune 2 --coin ETH
safevolt disabled
cor 733d0f 1150 1150 1150 1150 1150 1150
mem 733d0f 2150 2050 2050 2050 2050 2050
vlt 733d0f 900 850 850 850 850 850

I think the picture of the user above about the 24mhs doesn't tell much. We need to see the shares and if the cards are getting rejected shares. Maybe it can also be the 580 is performing better than the 570 with this zombie mode.
With the config above I am getting 29mhs from the 8GB (two cards out of 6) and 22mhs from the 4GB cards (4 out of 6). Totally STABLE. I don't have time to stay all day long looking at the miners. I need to press a button and forget about them at least for one week.
The 8GB till the last update where getting 30.5mhs but it's like to speed up the 4GB the system is taking out something from the 8GB. The total however is very good. Hopefully with the 1.19 we will get even more!!!

[1702166679]

1702166679

[1702166679]

1702166679

[io8621]

0-monitor 1-rx5700 2-7-rx470_4gb
RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA
DAG 387 BIOS GEN2
--4g-alloc-size 4082 --zombie-tune 2
181.58 Mh/s   54.02   21.81   21.28   20.60   20.90   21.17       21.80
--4g-alloc-size 4082 --zombie-tune 1
182.33 Mh/s   54.08    21.61   20.46   21.14   21.82   21.96       21.26

TRM --eth_4g_max_alloc=4082
185.12 Mh/s   54.23   22.02   20.98   21.62   22.20   22.29       21.78

4gb card run stable with 4082 alloc size? I can run stable on hiveos at 4080, also 4082 work but after 5 minute stop to work.
What driver use?

[jgonzi]

0-monitor 1-rx5700 2-7-rx470_4gb
RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA
DAG 387 BIOS GEN2
--4g-alloc-size 4082 --zombie-tune 2
181.58 Mh/s   54.02   21.81   21.28   20.60   20.90   21.17       21.80
--4g-alloc-size 4082 --zombie-tune 1
182.33 Mh/s   54.08    21.61   20.46   21.14   21.82   21.96       21.26

TRM --eth_4g_max_alloc=4082
185.12 Mh/s   54.23   22.02   20.98   21.62   22.20   22.29       21.78

4gb card run stable with 4082 alloc size? I can run stable on hiveos at 4080, also 4082 work but after 5 minute stop to work.
What driver use?

If they crash is normally OC they are at the maximum and any memory error crash them... reduce normally memory OC 1st, or try to reduce 4080

[jgonzi]

0-monitor 1-rx5700 2-7-rx470_4gb
RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 )

You are able to run it separate each card:
-zombie-tune 0,2,2,1,1,2
That will skip 5700, and select the best tune for the others.

[cryptomaxsun]

When mining Beam, the hashrate is only 4 sol.
Video card RX 480 4 gb.
Why is the hash rate so low? There is no such drop on other algorithms.

[io8621]

0-monitor 1-rx5700 2-7-rx470_4gb
RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA
DAG 387 BIOS GEN2
--4g-alloc-size 4082 --zombie-tune 2
181.58 Mh/s   54.02   21.81   21.28   20.60   20.90   21.17       21.80
--4g-alloc-size 4082 --zombie-tune 1
182.33 Mh/s   54.08    21.61   20.46   21.14   21.82   21.96       21.26

TRM --eth_4g_max_alloc=4082
185.12 Mh/s   54.23   22.02   20.98   21.62   22.20   22.29       21.78

4gb card run stable with 4082 alloc size? I can run stable on hiveos at 4080, also 4082 work but after 5 minute stop to work.
What driver use?

If they crash is normally OC they are at the maximum and any memory error crash them... reduce normally memory OC 1st, or try to reduce 4080

Must try with lower oc memory, at 4080 works stable for day but 4082 6 minutes and stop work.

[koppees]

https://ibb.co/Sx9v7pW
No memory errors, no rejected shares. All mem clocks are fine tuned on each card exactly to the point until getting any errors. 2 8GB cards with Hynix mem run with max 2200MHz clocks, 2 8GB cards with Samsung mem run with lower clocks, but draw a lot less power. 2 4GB cards also have Hynix mems. All cards are also undervolted to the exact level where the rig remains completely stable, to optimize the power draw.
https://ibb.co/wJMtcd0
Here is my Minerstat OS config for lolminer 1.18
https://ibb.co/4ZHM21J

[ivomm]

90% of my cards are crashing with 1.18, no matter how low/high I put --4g-alloc-size. Returning to 1.17. (Using the latest SMOS.)

[jgonzi]

90% of my cards are crashing with 1.18, no matter how low/high I put --4g-alloc-size. Returning to 1.17. (Using the latest SMOS.)

Can you put your config line ... To try to see if we can help you?.

[jgonzi]

https://ibb.co/Sx9v7pW
No memory errors, no rejected shares. All mem clocks are fine tuned on each card exactly to the point until getting any errors. 2 8GB cards with Hynix mem run with max 2200MHz clocks, 2 8GB cards with Samsung mem run with lower clocks, but draw a lot less power. 2 4GB cards also have Hynix mems. All cards are also undervolted to the exact level where the rig remains completely stable, to optimize the power draw.
https://ibb.co/wJMtcd0
Here is my Minerstat OS config for lolminer 1.18
https://ibb.co/4ZHM21J

Really good values, I think the highest value I have seen with Zombie Mode in this Epoch 24Mhs...

[Ortadan]

Hello, I have two 4gb platforms both working with RaveOS

One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card

My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS

I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes.

Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card

I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all 

[koppees]

Mr. developer, can we expect more improvements to zombie-mode in the future?

[jgonzi]

Hello, I have two 4gb platforms both working with RaveOS

One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card

My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS

I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes.

Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card

I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all 

For the rig is not working properly... you can use --
zombie-tune individually for each card. Try first 0, later 1 and later 2. Analyse which are the best values for each card and put them in order separate by ,  for example  2,1,1,0,1... so that will give you the best performance.
 
I.hope that improve some extra!!

[Ortadan]

Hello, I have two 4gb platforms both working with RaveOS

One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card

My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS

I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes.

Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card

I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all  

For the rig is not working properly... you can use --
zombie-tune individually for each card. Try first 0, later 1 and later 2. Analyse which are the best values for each card and put them in order separate by ,  for example  2,1,1,0,1... so that will give you the best performance.
 
I.hope that improve some extra!!

Thank you very much for responding, try --zombie-tune specifying each card and get the same result

--zombie-tune 2 - The five cards with low hashrate around 1 MHS each and the remaining Eight 23 MHS

--zombie-tune 1 - The five cards with low hashrate around 4 MHS each and the remaining Eight 21.8 MHS

--zombie-tune 0 - The platform crashes instantly when you start

When placing --zombie-tune 1,0,0,0,0,0,1,1,1,1,1,1 (where 0 are the ones that generate low hashrate with zombie tune) the platform similarly crashes when starting

I've already tried placing different --4g-alloc-size values from 4080 to 4040 and get the same result  

All I can think about is that the ASUS B-250 MINING EXPERT doesn't get along with the --zombie-tune, already in the BIOS active PCI GEN 2

I have 4GB of ram in the system but I don't think that influences?  

[lavain]

Mining result

I have 4x RX 470 strix asus 4gb

with NEW lolminer 1.18a

Coin : BTCZ BitcoinZ

Average score 87 sol/s at 480W

https://zapodaj.net/cc26c6603e2c4.jpg.html

[jgonzi]

Hello, I have two 4gb platforms both working with RaveOS

One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card

My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS

I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes.

Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card

I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all  

For the rig is not working properly... you can use --
zombie-tune individually for each card. Try first 0, later 1 and later 2. Analyse which are the best values for each card and put them in order separate by ,  for example  2,1,1,0,1... so that will give you the best performance.
 
I.hope that improve some extra!!

Thank you very much for responding, try --zombie-tune specifying each card and get the same result

--zombie-tune 2 - The five cards with low hashrate around 1 MHS each and the remaining Eight 23 MHS

--zombie-tune 1 - The five cards with low hashrate around 4 MHS each and the remaining Eight 21.8 MHS

--zombie-tune 0 - The platform crashes instantly when you start

When placing --zombie-tune 1,0,0,0,0,0,1,1,1,1,1,1 (where 0 are the ones that generate low hashrate with zombie tune) the platform similarly crashes when starting

I've already tried placing different --4g-alloc-size values from 4080 to 4040 and get the same result  

All I can think about is that the ASUS B-250 MINING EXPERT doesn't get along with the --zombie-tune, already in the BIOS active PCI GEN 2

I have 4GB of ram in the system but I don't think that influences?  

Are you in the last RaveOS  (8548-1581) or last HiveOS (20.40 opencl) to try to see if there are difference drivers... last idea 😅... or that the B250 don't like it jeje...

[ans76]

I have 4GB of ram in the system but I don't think that influences?  

Yes, 4GB insuficient for 12 GPU in ZombiMode, use 8 GB System RAM or more.

[miner29]

I have 4GB of ram in the system but I don't think that influences?  

Yes, 4GB insuficient for 12 GPU in ZombiMode, use 8 GB System RAM or more.

For windows users.  Linux users only need 4gb.  Try to provide full info and not just the crippled info that is for windows. 

[jgonzi]

I have 4GB of ram in the system but I don't think that influences?  

Yes, 4GB insuficient for 12 GPU in ZombiMode, use 8 GB System RAM or more.

For windows users.  Linux users only need 4gb.  Try to provide full info and not just the crippled info that is for windows. 

I think at the beginning of the Navi's also in Linux was a little bit more than 4Gb... but I need to check it.

[batsonxl]

Lolminer thanks this version (1.18) is pretty stable working many hours without any crash or any issue, very sad about 4g cards but hey you guys did everything to work them. im not expert and i hope in the future there will be solution for dag. i mean no matter what dag size gpus still continue to mine. thanks