lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

I am not using lolMiner 1.29.  But 3060Ti creating invalid shares are well known issue related to new DAG.
I saw many people talked before.  However, it seems no effective way to get rid off it.
Now, I need to reboot lolMiner Periodically especially after new DAG.

I think the dev comment something in the telegram  group that will improve in 1.30

[jgonzi]

Hi, buddies,

   My 3060Ti have problem when using lolminer.  After new DAG, my 3060Ti begin producing lots of invalid shares.
It is needed to reboot the lolminer, finish DAG, and then overclock it to resume normal condition.
It annoys me too much!

Any solution to solve this problem?

Less aggressive OC/UV

That could be too... or sometimes is the pool... It has happened before with some pool

[m1dz0]

Any chance to see 3070 Ti 'unlocked' soon ?

[jgonzi]

Any chance to see 3070 Ti 'unlocked' soon ?

I think this time it comes with more unlock... let's give some time to developers to check what's happening 😉

[jgonzi]

Any chance to see 3070 Ti 'unlocked' soon ?

Have you tested??

[FP91G]

Any chance to see 3070 Ti 'unlocked' soon ?

There is no data on new video cards yet.
This LHR series has recently started to be sold, the demand for mining has decreased due to a decrease in profit.
It is better to choose a used 3xxx series video card for mining Ethereum, when they were released without locks for mining.

[Commie]

Any chance to see 3070 Ti 'unlocked' soon ?

When the market will return to its normal state (and it's already on the way) history will repeat itself - realizing that miners don't buy their stuff and everyone else already bought what they needed Nvidia will quietly "leak" a new driver or some other kind of a fix to make them attractive to miners. Sure they can't just dismiss such a huge market.

[jgonzi]

It seems there is the new version 1.30 with ERGO and also with and improve for the 3060...

https://github.com/Lolliedieb/lolMiner-releases/releases

[P00P135]

It seems there is the new version 1.30 with ERGO and also with and improve for the 3060...

https://github.com/Lolliedieb/lolMiner-releases/releases

Slight boost from 37Mh/s to 38.5 @99watts.

[JohnnyDoeTheSecond]

It seems there is the new version 1.30 with ERGO and also with and improve for the 3060...

https://github.com/Lolliedieb/lolMiner-releases/releases

Slight boost from 37Mh/s to 38.5 @99watts.

ON HiveOS, 1.30 flat refuses to connect to Nicehash servers.
1.29 connect, but on the stupidly low hash rates courtesy of nVidia.

on HiveOS, it literally anything on Earth will work except lolminer 1.30 connecting to Nicehash AT ALL, let alone at low  hash rates, but everything else can.

Not sure why today, suddenly, NO lolminer works any longer except older versions.

I finally got lolminer to do something other than sitting there looking stupid when I had to, for the first time, manually enter all the pool information, etc, which is usually just automated by the %WAL% and other parameters.

But, it became retarded today, but only when dealing with HiveOS AND Nicehash at the same time.

Is Nicehash in collusion with nVidia to cripple cards or just flat ignore them if they use the faster software? First time it's happened today, nothing I have been able to do can force Nicehash to take over around 25Mh/card with 3060's, as if they have measures in place to punish anyone getting higher than Approved Hashrate.

[jgonzi]

It seems there is the new version 1.30 with ERGO and also with and improve for the 3060...

https://github.com/Lolliedieb/lolMiner-releases/releases

Slight boost from 37Mh/s to 38.5 @99watts.

ON HiveOS, 1.30 flat refuses to connect to Nicehash servers.
1.29 connect, but on the stupidly low hash rates courtesy of nVidia.

on HiveOS, it literally anything on Earth will work except lolminer 1.30 connecting to Nicehash AT ALL, let alone at low  hash rates, but everything else can.

Not sure why today, suddenly, NO lolminer works any longer except older versions.

I finally got lolminer to do something other than sitting there looking stupid when I had to, for the first time, manually enter all the pool information, etc, which is usually just automated by the %WAL% and other parameters.

But, it became retarded today, but only when dealing with HiveOS AND Nicehash at the same time.

Is Nicehash in collusion with nVidia to cripple cards or just flat ignore them if they use the faster software? First time it's happened today, nothing I have been able to do can force Nicehash to take over around 25Mh/card with 3060's, as if they have measures in place to punish anyone getting higher than Approved Hashrate.

In the telegram group, people is using the fix core clock for the 1.30, that seems to give the extra boost. You can fix it with the OS or by parameters with the --cclock 1480,1480, ... use * in case you have to avoid a GPU

https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-by-lolMiner-(English)

[dedizonesv2]

It seems there is the new version 1.30 with ERGO and also with and improve for the 3060...

https://github.com/Lolliedieb/lolMiner-releases/releases

Slight boost from 37Mh/s to 38.5 @99watts.

ON HiveOS, 1.30 flat refuses to connect to Nicehash servers.
1.29 connect, but on the stupidly low hash rates courtesy of nVidia.

on HiveOS, it literally anything on Earth will work except lolminer 1.30 connecting to Nicehash AT ALL, let alone at low  hash rates, but everything else can.

Not sure why today, suddenly, NO lolminer works any longer except older versions.

I finally got lolminer to do something other than sitting there looking stupid when I had to, for the first time, manually enter all the pool information, etc, which is usually just automated by the %WAL% and other parameters.

But, it became retarded today, but only when dealing with HiveOS AND Nicehash at the same time.

Is Nicehash in collusion with nVidia to cripple cards or just flat ignore them if they use the faster software? First time it's happened today, nothing I have been able to do can force Nicehash to take over around 25Mh/card with 3060's, as if they have measures in place to punish anyone getting higher than Approved Hashrate.

In the telegram group, people is using the fix core clock for the 1.30, that seems to give the extra boost. You can fix it with the OS or by parameters with the --cclock 1480,1480, ... use * in case you have to avoid a GPU

https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-by-lolMiner-(English)

After that, you don't have to use this stupid structure which is nicehash ....
They are thieves, liars and you will never be profitable in view of the costs, sometimes even late payments.

[P00P135]

With a little more tweaking im up to 41MH/s on my 3060 in hiveOS with probably a little more room with memory OC if you want to get crazy.

[jgonzi]

With a little more tweaking im up to 41MH/s on my 3060 in hiveOS with probably a little more room with memory OC if you want to get crazy.

Really an amazing photo!! Great JOB!!

[webhead]

i cant get the new 1.30 version to run is it real 1.28 runs great on my windows machine , but 1.30 just says setting up miner and nothing else , tried dif bat files still same , does it not like windows ryzen machines anymore lol.

[jgonzi]

i cant get the new 1.30 version to run is it real 1.28 runs great on my windows machine , but 1.30 just says setting up miner and nothing else , tried dif bat files still same , does it not like windows ryzen machines anymore lol.

Which Card and algo are you trying to run? Could you put some photos?

[UnclWish]

lolMiner 1.30. Windows 10 21H1 AMD 21.6.2 drivers. RX 580 8Gb cards.

Miner starts, write "Setup miner..." and than closes. Nicehash pool. Log file is empty. 0 bytes.

1.28a works.

Command line in bat:

lolMiner.exe --algo ETHASH --pool !POOL! --user !WALLET! --log --ethstratum=ETHV1
timeout 10

[jgonzi]

lolMiner 1.30. Windows 10 21H1 AMD 21.6.2 drivers. RX 580 8Gb cards.

Miner starts, write "Setup miner..." and than closes. Nicehash pool. Log file is empty. 0 bytes.

1.28a works.

Command line in bat:

lolMiner.exe --algo ETHASH --pool !POOL! --user !WALLET! --log --ethstratum=ETHV1
timeout 10

It has been reported a bug with the nicehash... you are completely right... In the telegram group the Dev said it will come soon the update to solve that problem.

[somaton]

Just came to ask same question, what does that "setup miner..." mean. Waiting for new version.

[Morph42]

i cant get the new 1.30 version to run is it real 1.28 runs great on my windows machine , but 1.30 just says setting up miner and nothing else , tried dif bat files still same , does it not like windows ryzen machines anymore lol.

I've run into a similar problem.  Running 1.28 on Windows10 (12 x AMD 8GB RX570) without issue.  But as soon as I attempt to run 1.30 it begins the setup process, waits about 10-20sec then displays "Press any key to continue..." and ends program.

I also ran the new eth script that came with 1.30 and also ran the more basic script for eth from 1.28 - no go.

Back to running 1.28 at this time.