[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[mtx_demon]

Anybody using EthOS??

I am wondering how I need to setup my ccminer to auto switch

just list like proxypool1 proxypool2??
should be enough to the auto switch?

[vertices]

NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin.  I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good.   https://imgur.com/a/cC3G5

I also get a bunch of red errors about NiceHash.  I did delete the 2 Nicehash.ps1 files.  I was told to remove them. https://imgur.com/a/0HcsW

This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti.  Trying to get problems resolved before I move that miner off of VTC.

Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64

This is my batch file to start it.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"

Here's a log file.     http://ge.tt/37QdNhn2

Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein


I tried searching this thread for excavator but only found 1 unrelated response.  I feel like I missed something stupid somewhere.  Thanks in advance.

[aaronsace]

NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin.  I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good.   https://imgur.com/a/cC3G5

I also get a bunch of red errors about NiceHash.  I did delete the 2 Nicehash.ps1 files.  I was told to remove them. https://imgur.com/a/0HcsW

This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti.  Trying to get problems resolved before I move that miner off of VTC.

Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64

This is my batch file to start it.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"

Here's a log file.     http://ge.tt/37QdNhn2

Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein


I tried searching this thread for excavator but only found 1 unrelated response.  I feel like I missed something stupid somewhere.  Thanks in advance.

You've deleted the NiceHash API.

"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."

[vertices]

You've deleted the NiceHash API.

"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."

Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder.

Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine?  I had to disable Lyra2z to get it stop mining Zcoin.  There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now.

[Lercker]

You've deleted the NiceHash API.

"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."

Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder.

Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine?  I had to disable Lyra2z to get it stop mining Zcoin.  There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now.

MPM mines what is best for your hash rate. MPH's profit switching is generalized and does not take your hash rate in to account. Also you do not need an active hub switch to run MPM.

[SuperDerpBro]

Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)

[Cryptographertm]

Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?

I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.

thanks.

[alanon09]

Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]}

[Little Miner]

Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?

I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.

thanks.

Which option did you choose for AutoExchange?

Which coin you wanna mining?

[Little Miner]

Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)

What is your graphic cards and core freq?

Amd cards on crypto needs higher core freq for better performance and GTX 1060 is not profit on crypto.

[skeletounek]

hi,
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx

[Little Miner]

Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]}

Use of the Claymore for mine daggerhashimoto on Nvidia cards.

[aaronsace]

Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]}

NiceHash blocked MiningPoolHub; MultiPoolMiner works with Excavator miner and can bypass the block.

[Little Miner]

hi,
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx

For example I doing mine on MonaCoin and VertCoin, you must see the MonaCoin --> Workers and yourname must be Orange for active and you can see the hashrate and also you can select MonaCoin --> Pool and must find yourname in the Contributor Hashrates.

[fonyo]

Nothing I have tried has enabled me to mine on miningpoolhub.

I've tried Awesome miner. NO dice.

Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.

Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.


So what does one do to make miningpoolhub work?

MiningPoolHub is a pool not a miner. There are zero problems with MiningPoolHub.

All miners connect to pools via a stratum connection protocol.

MiningPoolHub requires to use a username, not a BTC address. The -address command (in start.bat of) MultiPoolMiner is irrelevant when using miningpoolhub as your primary pool. Make sure you include your MiningPoolHub username!

[Stefek_K]

Guys I've made some calculations and my actual profits (3 day span) are pretty much 62% of what they should be if I were receiving the amount displayed by the miner when mining. The profits are also lower than what whattomine suggests and more in line with what I've been profiting when using Nicehash (pretty much the same $$$ per day as with nicehash a week ago, when it was still working). I've seen ~60% mentioned here before, so that's definitively another case of that.

I'm using aaronsace's miner. Multi algo + Auto exchange to BTC.

For some reason I'm also pretty much mining ZCoin 90% of the time, despite it not being a top algorithm on the mining hub page at a given time, losing to VTC, Mona and some others.

I'm pretty confused. Either there's something messed up, or I messed up. i wish someone could help me with this.

I'm switching to WinMiner for the time being, I can't seem to be able to figure this out. I love the idea of miningpoolhub but losing ~35% profits is too much.

[Cryptographertm]

well guys, cant say I recommend the auto exchange feature.

My coins have been sitting on the "exchange" for 2 days now (2017-12-10 22:18:16 (UTC) <-- time it hit the exchange

I dont know what exchange its on, or what priority MPH has to send it back.

Since its been there, the coin i was auto exchanging to has lost 25% value. I picked a coin that has extremely fast transfer times and very cheap tx fees <0.001 USD.

I wont be using the auto exchange feature anymore as  you will need to be able to predict altcoin prices >48 hours in advance.

I cant imagine how long a coin with a congested network would take.

[Gongolo]

well guys, cant say I recommend the auto exchange feature.

My coins have been sitting on the "exchange" for 2 days now (2017-12-10 22:18:16 (UTC) <-- time it hit the exchange

I dont know what exchange its on, or what priority MPH has to send it back.

Since its been there, the coin i was auto exchanging to has lost 25% value. I picked a coin that has extremely fast transfer times and very cheap tx fees <0.001 USD.

I wont be using the auto exchange feature anymore as  you will need to be able to predict altcoin prices >48 hours in advance.

I cant imagine how long a coin with a congested network would take.

IMHO, autoexchange (with or without multialgo switch) is the easy and confortable way: you just point your rig to MPH and just wait.
But it could also be not the more profitable way.
IMHO, best and more profitable way is still mining coins directly, with autoexchange off.
Then, you can hold those coins if you bet on long term profit or you can move them to bittrex/cryptopia/etc.. and change them to your favourite coin.
If you move them to bittrex, you have also the chance to sell your mined coins when you like, maybe later at a higher value or immediately if you feel that coin is going to sink.
Yes, this is the harder way and you have to invest more time, but IMHO it is the most profitable.
This is my 2 cents.. ehm, satoshis. 

[Cryptographertm]

Well when you are making a buck a day, you either auto exchange to a coin with cheap tx fees. or you have to wait weeks for it to be worth it to pay for the withdraw for something lke eth btc or ltc.

With my GPU I have few options of coins to mine, and none of them have reasonable enough withdraw fees that I can withdraw everyday, or even every otherday. And I dont want to leave them on a website where i dont have the priv key for long.

So either auto exchange doesnt take a week, or ill have to look somewhere else for a better solution.

thanks for the reply.

[Drennoga]

Hey There, question if anyone can answer. 
When a BLOCK is found on your pool"Miningpoolhub" which is the pool I use to mine Zcoin. How can you tell how much $ you are receiving when a block is found. Can you calculate how much $ from the number listed on the right side of your hash power? By the way some times the numbers are zeros. Correct me if i'm wrong, but I think that is when a block has been found?. Here is an example when they are not zeros.

XZC Estimates
Block   0.00370460
Fees   0.00003334
Donation   0.00000000
Payout   0.00367126

How much am I receiving per/block found? is it 0.00367 of a dollar? is it 0.00367 of 1 Zcoin? is it 0.00367 of the 40 Zcoin?
How can I tell how much I received in a 24-hour period of blocks being found for Zcoin? Its hard to tell the difference of what I mined/received from blocks found if this is the case in a 1 hour period or 24 hour period. In the Unconfirmed for Auto Exchange it is all bundled up so I cannot tell what I personally mined from the miner only. Is there a way to look up what I mined/received with out them being together?

I looked at the Graph hash-rate of my miner, and I see my highest point my miner's hash-rate,  and also the mid range hash-rate. I still cannot get a good accurate average of my hash power during the hours. Is there something I can do that can give me numbers on the graphs to get accurate average #reading of my hash-rate over a 1hour/3hour/6hour/24hour period?

Don't mean to complain. Just looking for answers/help.
Thanks to everyone in advance for helping me/answering my questions in advance.
Cheers*