RX570 MSI ARMOR 8GB SAMSUNG

[Kanni]

Hello,

i have a rig of 12 MSI ARMOR RX570 8GB with 10 micron and 2 SAMSUNG.

All micron work fine at 31mh+

But the two samsung dont want to up more than 1900mm with ubermix 3.1 timing.

I put the ubermix 3.2 timing straps and the card can go to 2000mm now.(29mh)

I see on 4GB people can up easy to 2100mm.

Some people have the same issue and a solution ?

https://ibb.co/nHJDby

[Raja_MBZ]

I faced that very same issue recently with one of my RX 480 8 GB, and at last I found that the issue is unsolvable and GPU got damaged by heat & mining load. I'm afraid your RX 570 got damaged as well; however, don't forget to try a clean re-install of everything before you give up on the issue.

BTW, which miner are you using?

[hiroshidw]

I believe you have used 1625 timming strap, this not should be used for Samsung memory, you must use custom timming or 1750 strap, then you can go with 2100+ mclock.

[Kanni]

I talk with other friend on my pool, seems to be the same for all V341-240SB.

The card is new, the card can't be damage by mining load.

I use phoenix but it's same on claymore.

For timing, i try 1500-1625-1750 it was the same.

With 1750 the card up to 2000mclock but still low at 28mh.