miniZ (OP)
|
|
April 11, 2019, 01:48:30 PM |
|
Hello i tried with only one instance and it closed by itself ... i Think it could be something with cgminer et bfgminer who are running at the same time for my moonlanders and my newpack
Hi johnstewart, if you mean running at the same time in the same GPUs, yes that might be the cause. If you have other miners running on the same GPU, miniZ may not have enough memory available to run or can get unstable. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
|
April 12, 2019, 06:13:11 AM Last edit: April 12, 2019, 11:11:38 AM by Ziv1 |
|
Good day. The log file needs time online. It is difficult to look for failures in time to stop a farm from the pool. There were 2 failures that were recorded by the pool (the duration of the failure was more than 20 minutes). It was not recorded in the log file. You can see only the temperature drop of the cards and the power consumption.
Good luck.
0>GTX 1060 3GB ` 100% [52шC/46%] 16.12 I/s 31.9(32.1)Sol/s 69( 69.8)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [53шC/46%] 16.17 I/s 31.8(32.3)Sol/s 71( 71.3)W clk=1582MHz mclk=4201MHz Sol/W=0.45 [ 0d11h19m46s] S:237/0 63(64.4)Sol/s 141(141.4)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [53шC/46%] 16.12 I/s 31.7(32.1)Sol/s 69( 69.8)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [54шC/48%] 16.18 I/s 31.7(32.3)Sol/s 72( 71.3)W clk=1569MHz mclk=4201MHz Sol/W=0.45 [ 0d11h19m56s] S:237/0 63(64.4)Sol/s 101(140.1)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [49шC/40%] 16.12 I/s 31.7(32.1)Sol/s 48( 69.7)W clk=1569MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [51шC/46%] 16.18 I/s 31.7(32.3)Sol/s 53( 71.3)W clk=1556MHz mclk=4201MHz Sol/W=0.45 [ 0d11h20m06s] S:237/0 63(64.4)Sol/s 80(138.8)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [47шC/36%] 16.12 I/s 31.7(32.1)Sol/s 37( 69.7)W clk=1569MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [49шC/38%] 16.18 I/s 31.7(32.3)Sol/s 43( 71.3)W clk=1556MHz mclk=4201MHz Sol/W=0.45 [ 0d11h20m16s!!!!!!?] S:237/0 63(64.4)Sol/s 48!!!!!?(136.7)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [45шC/32%] 16.12 I/s 31.7(32.1)Sol/s 22( 69.7)W clk=189MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [47шC/36%] 16.18 I/s 31.7(32.3)Sol/s 26( 71.2)W clk=898MHz mclk=810MHz Sol/W=0.45 [ 0d11h20m27s!!!!!?] S:237/0 63(64.4)Sol/s 30(134.7)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [44шC/30%] 16.12 I/s 31.7(32.1)Sol/s 14( 69.6)W clk=139MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [46шC/32%] 16.18 I/s 31.7(32.3)Sol/s 16( 71.2)W clk=139MHz mclk=405MHz Sol/W=0.45 [ 0d11h20m37s] S:237/0 58(64.3)Sol/s 21(132.7)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [43шC/30%] 14.77 I/s 29.1(32.1)Sol/s 10( 69.6)W clk=139MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [44шC/30%] 14.92 I/s 29.2(32.2)Sol/s 11( 71.1)W clk=139MHz mclk=405MHz Sol/W=0.45 [ 0d11h20m47s] S:237/0 59(64.3)Sol/s 81(132.8)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [49шC/36%] 14.91 I/s 29.4(32.1)Sol/s 40( 69.6)W clk=1607MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [49шC/38%] 15.06 I/s 29.3(32.2)Sol/s 41( 71.1)W clk=1594MHz mclk=4201MHz Sol/W=0.45 [ 0d11h20m57s] S:237/0 59(64.3)Sol/s 110(132.9)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [50шC/38%] 15.04 I/s 29.4(32.1)Sol/s 53( 69.6)W clk=1594MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [50шC/40%] 15.18 I/s 29.8(32.2)Sol/s 57( 71.1)W clk=1582MHz mclk=4201MHz Sol/W=0.45 [ 0d11h21m07s] S:237/0 60(64.3)Sol/s 129(133.1)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [50шC/40%] 15.15 I/s 30.2(32.1)Sol/s 64( 69.6)W clk=1620MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [50шC/40%] 15.28 I/s 29.9(32.2)Sol/s 66( 71.1)W clk=1594MHz mclk=4201MHz Sol/W=0.45 [ 0d11h21m17s] S:237/0 61(64.3)Sol/s 137(133.3)W [btcz.2miners.com] (98.0%) (2.0
[ 0d16h58m25s] S:360/0 64(64.4)Sol/s 144(141.5)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [54шC/48%] 16.09 I/s 32.3(32.2)Sol/s 71( 69.6)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [55шC/50%] 16.16 I/s 31.3(32.2)Sol/s 73( 71.3)W clk=1569MHz mclk=4201MHz Sol/W=0.45 [ 0d16h58m35s] S:360/0 64(64.4)Sol/s 142(141.5)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [54шC/48%] 16.09 I/s 32.2(32.2)Sol/s 68( 69.6)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [55шC/50%] 16.16 I/s 32.0(32.2)Sol/s 73( 71.3)W clk=1569MHz mclk=4201MHz Sol/W=0.45 [ 0d16h58m45s] S:360/0 64(64.4)Sol/s 101(140.1)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [50шC/48%] 16.09 I/s 32.3(32.2)Sol/s 48( 69.6)W clk=1569MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [52шC/50%] 16.16 I/s 32.0(32.2)Sol/s 53( 71.3)W clk=1556MHz mclk=4201MHz Sol/W=0.45 [ 0d16h58m55s] S:360/0 64(64.4)Sol/s 80(138.8)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [48шC/38%] 16.09 I/s 32.3(32.2)Sol/s 37( 69.6)W clk=1569MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [50шC/42%] 16.16 I/s 32.0(32.2)Sol/s 43( 71.2)W clk=1556MHz mclk=4201MHz Sol/W=0.45 [ 0d16h59m05s] S:360/0 64(64.4)Sol/s 48(136.8)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [46шC/34%] 16.09 I/s 32.3(32.2)Sol/s 22( 69.5)W clk=177MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [48шC/38%] 16.16 I/s 32.0(32.2)Sol/s 26( 71.2)W clk=898MHz mclk=810MHz Sol/W=0.45 [ 0d16h59m15s] S:360/0 64(64.4)Sol/s 31(134.7)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [45шC/30%] 16.09 I/s 32.3(32.2)Sol/s 14( 69.5)W clk=139MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [47шC/34%] 16.16 I/s 32.0(32.2)Sol/s 16( 71.1)W clk=139MHz mclk=405MHz Sol/W=0.45 [ 0d16h59m26s] S:360/0 64(64.4)Sol/s 22(132.7)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [44шC/30%] 16.09 I/s 32.3(32.2)Sol/s 11( 69.4)W clk=139MHz mclk=405MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [45шC/32%] 16.16 I/s 32.0(32.2)Sol/s 11( 71.1)W clk=139MHz mclk=405MHz Sol/W=0.45 [ 0d16h59m36s] S:360/0 58(64.3)Sol/s 82(132.9)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [48шC/30%] 14.62 I/s 29.3(32.1)Sol/s 41( 69.4)W clk=1594MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [49шC/30%] 14.68 I/s 29.1(32.2)Sol/s 42( 71.1)W clk=1556MHz mclk=4201MHz Sol/W=0.45 [ 0d16h59m46s] S:360/0 59(64.3)Sol/s 113(133.0)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [50шC/38%] 14.77 I/s 29.9(32.1)Sol/s 55( 69.4)W clk=1620MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [50шC/40%] 14.83 I/s 29.7(32.2)Sol/s 58( 71.1)W clk=1594MHz mclk=4201MHz Sol/W=0.45 [ 0d16h59m56s] S:360/0 60(64.3)Sol/s 127(133.2)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [51шC/40%] 14.91 I/s 29.9(32.1)Sol/s 64( 69.4)W clk=1607MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [51шC/42%] 14.97 I/s 30.1(32.2)Sol/s 63( 71.1)W clk=1582MHz mclk=4201MHz Sol/W=0.45 [ 0d17h 0m06s] S:360/0 60(64.3)Sol/s 135(133.3)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [51шC/42%] 15.04 I/s 30.1(32.1)Sol/s 67( 69.4)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [52шC/42%] 15.09 I/s 30.2(32.2)Sol/s 68( 71.1)W clk=1582MHz mclk=4201MHz Sol/W=0.45 [ 0d17h 0m16s] S:360/0 61(64.3)Sol/s 138(133.4)W [btcz.2miners.com] (98.0%) (2.0%) 0>GTX 1060 3GB ` 100% [52шC/42%] 15.14 I/s 30.3(32.1)Sol/s 68( 69.4)W clk=1582MHz mclk=4201MHz Sol/W=0.46 1>GTX 1060 3GB ` 100% [52шC/44%] 15.21 I/s 30.6(32.2)Sol/s 70( 71.1)W clk=1582MHz mclk=4201MHz Sol/W=0.45 [ 0d17h 0m26s] S:360/0 61(64.3)Sol/s 140(133.6)W [btcz.2miners.com] (98.0%) (2.0%)
|
|
|
|
Xenoflex
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 12, 2019, 12:32:47 PM |
|
Hi MiniZ, very good work. Is there a chance you add a configfile support? Cheers!
|
|
|
|
RoninAlek
Newbie
Offline
Activity: 26
Merit: 1
|
|
April 13, 2019, 03:31:06 AM |
|
Hi MiniZ, very good work. Is there a chance you add a configfile support? Cheers!
You talking about the GUI or the batch file? If you are talking about the batch file config, create a new batch file with: miniZ -h pause If you are talking about the GUI, they have it on their website: https://miniz.ch/miniz-gui-launcher/
|
|
|
|
miniZ (OP)
|
|
April 13, 2019, 10:51:38 AM |
|
Good day. The log file needs time online. It is difficult to look for failures in time to stop a farm from the pool. There were 2 failures that were recorded by the pool (the duration of the failure was more than 20 minutes). It was not recorded in the log file. You can see only the temperature drop of the cards and the power consumption.
Good luck.
Hi Ziv1, Can you explain better what you mean by 'time online'? Just to be sure We have experienced the same behavior from our 10603 GB, for some OC values. Sometimes, the GPU gets stuck and stops mining for a few minutes. If we ajust the OCs this behavior does not happen anymore. With PL=72W we managed to run miniZ (with --oc1) and it runs smoothly, clk~1594MHz, mclk=3666MHz, 16.55 I/s, 33.1 Sol/s. In MSI Afterburner would be something like core clock = +205, memory clock = -135, but you should test for your conditions. [ 0d 8h16m39s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.3(33.1)Sol/s 72( 70.9)W clk=1594MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%) [ 0d 8h16m49s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.4(33.1)Sol/s 73( 70.9)W clk=1607MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%) [ 0d 8h16m59s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.2(33.1)Sol/s 75( 70.9)W clk=1607MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%) [ 0d 8h17m09s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.4(33.1)Sol/s 70( 70.9)W clk=1582MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%) We suggest you to tune your values, but we'll keep looking into this behavior. Thanks for the feedback! Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 13, 2019, 10:54:34 AM |
|
Hi MiniZ, very good work. Is there a chance you add a configfile support? Cheers!
Hi Xenoflex, Thank you for the encouragement! As suggested by RoninAlek (Thanks RoninAlek!), you can create a .bat file with your personalised command line to run miniZ. If you still need a configuration file we will consider your request for the next version. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
artful
Newbie
Offline
Activity: 59
Merit: 0
|
|
April 13, 2019, 08:29:34 PM |
|
me run miniz in linux ubuntu in mode - one miner - one videocard count of run copy > 10 why in first gpu me see 10working copy miniZ and one copy in other card nvidia-smi: +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 948 G /usr/lib/xorg/Xorg 5MiB | | 0 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 1 948 G /usr/lib/xorg/Xorg 5MiB | | 2 948 G /usr/lib/xorg/Xorg 5MiB | | 3 948 G /usr/lib/xorg/Xorg 5MiB | | 4 948 G /usr/lib/xorg/Xorg 5MiB | | 4 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 5 948 G /usr/lib/xorg/Xorg 5MiB | | 6 948 G /usr/lib/xorg/Xorg 5MiB | | 6 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 7 948 G /usr/lib/xorg/Xorg 5MiB | | 7 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 8 948 G /usr/lib/xorg/Xorg 5MiB | | 8 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 9 948 G /usr/lib/xorg/Xorg 5MiB | | 9 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 10 948 G /usr/lib/xorg/Xorg 5MiB | | 11 948 G /usr/lib/xorg/Xorg 5MiB | | 12 948 G /usr/lib/xorg/Xorg 5MiB | | 12 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 13 948 G /usr/lib/xorg/Xorg 5MiB | | 13 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 14 948 G /usr/lib/xorg/Xorg 5MiB | | 14 16945 C ...ing/calcprofit/miners/t-rex/0.9.2/t-rex 119MiB | | 15 948 G /usr/lib/xorg/Xorg 5MiB | | 15 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 16 948 G /usr/lib/xorg/Xorg 5MiB | | 16 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | +-----------------------------------------------------------------------------+
|
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
|
April 14, 2019, 06:15:26 AM |
|
Good day. Real time (we have the duration of the farm) is needed to understand what happened with the farm. (pool reports a 30-minute delay in receipt of share) It is difficult to find the place of failure in the log file if it is not specified when it happened. Miner can automatically reboot and continue working. Good luck.
|
|
|
|
miniZ (OP)
|
|
April 14, 2019, 05:47:55 PM |
|
me run miniz in linux ubuntu in mode - one miner - one videocard count of run copy > 10 why in first gpu me see 10working copy miniZ and one copy in other card nvidia-smi: +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 948 G /usr/lib/xorg/Xorg 5MiB | | 0 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 0 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB | | 1 948 G /usr/lib/xorg/Xorg 5MiB | | 2 948 G /usr/lib/xorg/Xorg 5MiB | | 3 948 G /usr/lib/xorg/Xorg 5MiB | | 4 948 G /usr/lib/xorg/Xorg 5MiB | | 4 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 5 948 G /usr/lib/xorg/Xorg 5MiB | | 6 948 G /usr/lib/xorg/Xorg 5MiB | | 6 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 7 948 G /usr/lib/xorg/Xorg 5MiB | | 7 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 8 948 G /usr/lib/xorg/Xorg 5MiB | | 8 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 9 948 G /usr/lib/xorg/Xorg 5MiB | | 9 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 10 948 G /usr/lib/xorg/Xorg 5MiB | | 11 948 G /usr/lib/xorg/Xorg 5MiB | | 12 948 G /usr/lib/xorg/Xorg 5MiB | | 12 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 13 948 G /usr/lib/xorg/Xorg 5MiB | | 13 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 14 948 G /usr/lib/xorg/Xorg 5MiB | | 14 16945 C ...ing/calcprofit/miners/t-rex/0.9.2/t-rex 119MiB | | 15 948 G /usr/lib/xorg/Xorg 5MiB | | 15 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | | 16 948 G /usr/lib/xorg/Xorg 5MiB | | 16 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB | +-----------------------------------------------------------------------------+
Hi artful, thank you for your question. Each miner instance is creating a memory context on GPU0. This memory context does not increase GPU computing usage, but it does affect its memory usage. Because there is no need for this, we will fix this in the next version. If you want to resolve this, for now you can choose the GPUs with CUDA_VISIBLE_DEVICES. For example, if you want to run a miniz instance on GPU 2 You run: CUDA_DEVICE_ORDER=PCI_BUS_ID CUDA_VISIBLE_DEVICES=2 ./miniZ --url YourWallet.Worker@PoolServer:PortNumber Do not write -cd 2 in the command line. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 14, 2019, 05:49:01 PM |
|
Good day. Real time (we have the duration of the farm) is needed to understand what happened with the farm. (pool reports a 30-minute delay in receipt of share) It is difficult to find the place of failure in the log file if it is not specified when it happened. Miner can automatically reboot and continue working. Good luck.
Hi Ziv1, we will add it to the next version. Thanks for the feedback. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Xenoflex
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 15, 2019, 04:52:10 AM |
|
Hi MiniZ, very good work. Is there a chance you add a configfile support? Cheers!
Hi Xenoflex, Thank you for the encouragement! As suggested by RoninAlek (Thanks RoninAlek!), you can create a .bat file with your personalised command line to run miniZ. If you still need a configuration file we will consider your request for the next version. Cheers I know the commandline parameters and batchfile usage, but it would be much better to use config files. So please consider the configuration file request for the next version. Its much appreciated! Cheers
|
|
|
|
crairezx20
Legendary
Offline
Activity: 1638
Merit: 1046
|
|
April 16, 2019, 11:47:01 AM |
|
How can I enable SSL I tried mining on some pool with ssl:// pool but It doesn't work the CMD shows "SSL: no" What settings to enable this. I already follow the settings from the site you provide from the first page but it doesn't work.
|
|
|
|
miniZ (OP)
|
|
April 16, 2019, 02:11:43 PM |
|
How can I enable SSL I tried mining on some pool with ssl:// pool but It doesn't work the CMD shows "SSL: no" What settings to enable this. I already follow the settings from the site you provide from the first page but it doesn't work.
Hi crairezx20, are you using --url? Usage would be something as follows ./miniZ --url ssl://YourWallet.Worker@PoolServer:PortNumber If this is not working, could you paste here your command line? Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
george2019
Jr. Member
Offline
Activity: 83
Merit: 3
|
|
April 16, 2019, 10:29:29 PM |
|
here's my rig results after first day of mining: https://i.imgur.com/A3R0g1y.pnghttps://i.imgur.com/wWQ6Ddz.pngall 5 GPU working on TDP 70% memory +500, as for core oc i used following settings: GTX 1080Ti zotac amp +100 GTX 1080 msi gamer x +150 3XGTX 1080 EVGA ftw (using second bios with automatic core oc) +0 it's very stable with good temps as well, quite good miner, has higher hashrates than other miners with same settings, used exact same settings as with equihash algo that i was mining last summer before asics arrived, also used --oc2 command in batfile, my rig uses around 20gb pagefile with equihash 144.5 algo, zelcash had some crazy price increase in last month or so, let's see how further can price rise
|
|
|
|
|
AZaman
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 20, 2019, 11:28:50 AM |
|
i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos anyone know why? GPU1 in image https://ibb.co/yWLf1q9
|
|
|
|
miniZ (OP)
|
|
April 20, 2019, 04:47:41 PM |
|
here's my rig results after first day of mining: https://i.imgur.com/A3R0g1y.pnghttps://i.imgur.com/wWQ6Ddz.pngall 5 GPU working on TDP 70% memory +500, as for core oc i used following settings: GTX 1080Ti zotac amp +100 GTX 1080 msi gamer x +150 3XGTX 1080 EVGA ftw (using second bios with automatic core oc) +0 it's very stable with good temps as well, quite good miner, has higher hashrates than other miners with same settings, used exact same settings as with equihash algo that i was mining last summer before asics arrived, also used --oc2 command in batfile, my rig uses around 20gb pagefile with equihash 144.5 algo, zelcash had some crazy price increase in last month or so, let's see how further can price rise Hi george2019, thanks for the encouragement and all this information. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 20, 2019, 04:51:31 PM |
|
Hi A11an, thank you for reporting this. We fixed this already, in the next version it will be working OK. (out soon) Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
April 20, 2019, 04:54:09 PM |
|
i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos anyone know why? GPU1 in image Hi AZaman, it should work on all cards, however we see your point. After some time, do the values for GPU0 and GPU1 converge to a higher value? We notice that they are a bit warmer than the rest of your GPUs, might affect the performance even though it not a great difference. Let us know if after a few hours the difference is maintained. Also, do you have any display hardware attached? Additonally, could you paste the log here? The information in the begining should be enough (the GPUs info is the most important). Thanks. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
AZaman
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 20, 2019, 07:15:42 PM |
|
i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos anyone know why? GPU1 in image https://ibb.co/yWLf1q9Hi AZaman, it should work on all cards, however we see your point. After some time, do the values for GPU0 and GPU1 converge to a higher value? We notice that they are a bit warmer than the rest of your GPUs, might affect the performance even though it not a great difference. Let us know if after a few hours the difference is maintained. Also, do you have any display hardware attached? Additonally, could you paste the log here? The information in the begining should be enough (the GPUs info is the most important). Thanks. Cheers not really dropped. infact i had to increase powerlimit as it became unstable, https://ibb.co/LZ9RwY3here are my OC settings https://ibb.co/4NMqHk3log info : [ 0d 1h50m26s] 449(447.4)Sol/s 857(853.3)W 0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.3(67.7)Sol/s 135(134.4)W clk=1430MHz mclk=4957MHz Sol/W=0.50 1>GTX 1080 Ti ` 100% [47°C/50%] 33.81 I/s 68.0(67.3)Sol/s 124(122.9)W clk=1341MHz mclk=4957MHz Sol/W=0.55 2>GTX 1080 Ti ` 100% [47°C/50%] 39.62 I/s 79.1(79.1)Sol/s 151(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53 3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.9(76.9)Sol/s 147(148.2)W clk=1620MHz mclk=4957MHz Sol/W=0.52 4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.3(78.9)Sol/s 150(149.3)W clk=1683MHz mclk=4957MHz Sol/W=0.53 5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.3(77.5)Sol/s 149(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52 [ 0d 1h50m36s] 448(447.4)Sol/s 860(853.4)W 0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.1(67.7)Sol/s 136(134.4)W clk=1379MHz mclk=4957MHz Sol/W=0.50 1>GTX 1080 Ti ` 100% [48°C/50%] 33.82 I/s 67.9(67.3)Sol/s 124(122.9)W clk=1354MHz mclk=4957MHz Sol/W=0.55 2>GTX 1080 Ti ` 100% [47°C/50%] 39.63 I/s 79.6(79.1)Sol/s 150(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53 3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.8(76.9)Sol/s 150(148.3)W clk=1645MHz mclk=4957MHz Sol/W=0.52 4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.1(78.9)Sol/s 150(149.3)W clk=1657MHz mclk=4957MHz Sol/W=0.53 5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.5(77.6)Sol/s 150(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52
|
|
|
|
|