[GROUP BUY][CH] Gridseed 5-Chip USB Miner & Blades coming (new prices)

[warptoy]

Everything arrived today, up and running - plug&play I should say!
Many thanks to darkfriend77 for his REALLY GREAT WORK!!!!! 

[1713431747]

1713431747

[ineedit]

i really want to know what you are up to

Have fun!

best regards

Hektek

Fingers crossed it is going to be a good discounted price on the new blades http://gridseed-blog.com/gridseed-blade-miner-soon-available/

and a batch 3 for seeds.

[conspirosphere.tk]

Everything arrived today, up and running - plug&play I should say!
Many thanks to darkfriend77 for his REALLY GREAT WORK!!!!! 

+1

[Gordon Bleu]

Everything was delivered and it's working with 362 kh/s since Saturday.
I was a little bit worried because the Power Supply had no Grounding/Earth so i had to fix that, because first had some Fear to touch them while running.
Nice Suggestion from OP to run them from 1 Power Supply, keep  1 as a Reserve.
1 Gridseed could maybe pass RMA, it had scratches and the Screws where overdriven. Thing made very annoying Noises until i inspected it, while it was running, then my Finger got stuck in the Fan, i dropped it, surprisingly now it^s working fine and the Klicking Noise is gone.


Thanks to Darkfriend +1

[Gordon Bleu]

also my Image is open for SSH access, just use pi/raspberry as credentials ...

Should have read the Thread before, tried all the other passwds in this Forum.
what's the root pass? Root Password for the Hashra Pi Controla?

stupid me, sudo passwd to get root

[darkfriend77]

changed prices for an upcoming Batch 3 ....

please be aware there is no shipping from EU included ...

shipping is done from switzerland or local pickup.


what changed else:

- no more power supply isntead atx compatible plugs are delivered in the package

Price:

1 GRIDSEED USB-Miner only 160$

10 GRIDSEED USB-Miner packet 1800$
10 x USB Miner 5-Chip GRIDSEED
 1 x Raspberry Pi (+ SD Card with actual Image)
10 x USB 2.0 to Micro USB Cable
 1 x USB Hub 10-Ports
10 x Power cable (2.5-5.5mm) Plug ATX compatible (scrypt only) (PCIE or Molex 4Pin)

image comming ...

Additional costs:
Shipping costs
Taxes

[david123]

changed prices for an upcoming Batch 3 ....

please be aware there is no shipping from EU included ...

shipping is done from switzerland or local pickup.

Nice price you got now.. I'm out, but just for curiosity: Did you run into problems
getting them over the border? or are you just tired of playing the parcel carrier? (what
I could understand )

[darkfriend77]

changed prices for an upcoming Batch 3 ....

please be aware there is no shipping from EU included ...

shipping is done from switzerland or local pickup.

Nice price you got now.. I'm out, but just for curiosity: Did you run into problems
getting them over the border? or are you just tired of playing the parcel carrier? (what
I could understand )

or are you just tired of playing the parcel carrier?

That's a good description of how I feelt after the batch 2 ...

[eraser]

received miners today

ty !!

[darkfriend77]

received miners today

ty !!

your welcome

[volum4]

my package is still sitting in radefeld like if it was glued in there. damn dhl fuckers.. 
i'm afraid that i gonna have no time to mess with mining stuff at all. been very busy with other things lately.. if someone in eu is interested in 10-miner package from batch 2 then pm me, i can reship/sell it when it arrives.

[darkfriend77]

UPDATE:

Price:

1 GRIDSEED USB-Miner only 160$

10 GRIDSEED USB-Miner packet 1800$
10 x USB Miner 5-Chip GRIDSEED
 1 x Raspberry Pi (+ SD Card with actual Image)
10 x USB 2.0 to Micro USB Cable
 1 x USB Hub 10-Ports
10 x Power cable (2.5-5.5mm) Plug ATX compatible (scrypt only) (PCIE or Molex 4Pin)

[Kergekoin]

Nice!

Do i understand correctly that since you are shipping from Sw we will have to pay VAT on recieving?
Anyway, please contact me for price of 50 as i PMd your earlier.

[pictsidhe]

I'm in for 30, I think... When will payment be due by? What price for bare miners +1 sd card? Shipping to UK. I'll need vat receipt as I can get that back, eventually.


I'll be making up dual mode rated power cables for modular Corsair and EVGA supplies, I have a pile of them becoing redundant as my gpus get sold off... If anyone wants some? Plug straight in to psu. 650W+ needed for 10 miners, 1000 for 15, 1300 will run 20 in dual mode. You must specify corsair OR evga, they aren't interchangeable, not without letting magic smoke out of your gridseeds anyway.

prices below for average lead length of 50cm, you can pick you own lengths. If you don't specify, they'll be staggered. 30, 42, 55, 67cm Extra length $1.5 per m

4x gridseed - modular supply: $12

2x 5V hub + poweron lead (modular ATX plug with built in 'paperclip' trick) $7

as above with 4x 5V hub $11

+ delivery from UK, bitcoin or bank transfer.


give me a week or two and I'll have Pis turning on ATX supplies.

[darkfriend77]

I'm in for 30, I think... When will payment be due by? What price for bare miners +1 sd card? Shipping to UK. I'll need vat receipt as I can get that back, eventually.


I'll be making up dual mode rated power cables for modular Corsair and EVGA supplies, I have a pile of them becoing redundant as my gpus get sold off... If anyone wants some? Plug straight in to psu. 650W+ needed for 10 miners, 1000 for 15, 1300 will run 20 in dual mode. You must specify corsair OR evga, they aren't interchangeable, not without letting magic smoke out of your gridseeds anyway.

prices below for average lead length of 50cm, you can pick you own lengths. If you don't specify, they'll be staggered. 30, 42, 55, 67cm Extra length $1.5 per m

4x gridseed - modular supply: $12

2x 5V hub + poweron lead (modular ATX plug with built in 'paperclip' trick) $7

as above with 4x 5V hub $11

+ delivery from UK, bitcoin or bank transfer.


give me a week or two and I'll have Pis turning on ATX supplies.

No problem ... will note you up for 30 miners only I suppose ...

[darkfriend77]

Chips:
Gridseed GC3355. Each unit has 80 chips.
Mining Capability(Official Number):
Scrypt: 5.2 - 6 M
Power Consumption:
Scrypt: 80-100W/Unit
Input:
12V / 4.2A (you need 2 powers)
Dimension:
30.5cm*11.2cm*9.2cm.

[shootme]

What is that?
How much?

[david123]

Hey, I have one more stupid question: With this wonderful plug-n-play raspb-pi-image,
I can select clock speed up to 900. I think about this volt-mod, so what would be the
cleanest way to run higher clock speeds..? I could manually start the miner with
the right parameters using ssh, but there must be a better way, right?

[shootme]

Anyone knows how to log in trough SSH in the image?
Tried everything with root/hashra/pi, but i cant login  

[david123]

Hey darkfriend, can you tell me what are the ssh credentials for your rasbpi-image?
user: root / psw: scripta doesn't work for me...

pi / raspberry