Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 05:40:57 PM |
|
Changed address to one that starts with T. Thanks, yes website working now. Wallet still stuck at 13427
Damn. Okay, I am adding another seed node now. I will give you the IP when it's up and in sync. Thanks
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 06:52:15 PM Last edit: August 18, 2018, 07:38:24 PM by apt-getschwifty |
|
Changed address to one that starts with T. Thanks, yes website working now. Wallet still stuck at 13427
Damn. Okay, I am adding another seed node now. I will give you the IP when it's up and in sync. Thanks Okay, so, added new seed node at 192.243.103.250:421 It was able to successfully sync the chain immediately, hopefully you will be able to. The github has been updated with the address hardcoded in to the source, so you can either reclone and compile it (which I would do eventually anyway so you have it) OR you can just add connect=192.243.103.250:421 to your conf file. Also, I see that my pool started payouts to the S address you used initially, are you receiving them? If not, Obviously if you aren't in sync with the chain you aren't receiving them, regardless you will see them coming to the T address in the next hour or so. Let me know if you're able to sync the chain!
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 08:22:08 PM |
|
stuck @ 13405 now. can you upload blockchain?
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 08:31:35 PM |
|
stuck @ 13405 now. can you upload blockchain?
lolol damn itttttttttt. Yes I can, give me a little bit, I'll add it to the github.
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 08:34:11 PM |
|
Ok thanks
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 08:54:30 PM |
|
Ok thanks
Added a folder called bootstrap-blk18763 to the github, within is a bootstrap.dat as of block 18763, give it a shot.
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 09:40:21 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 09:44:59 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
Did you delete the blocks/chainstate folders and their contents and place the bootstrap.dat in your data directory? I'm sorry about this, we will get it sorted either way. If this doesn't work for you I will try uploading by actual blk.dat for you.
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 09:46:05 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
Also I still see headers being sent your way from the seed node..
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 09:53:02 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
Try deleting everything in your data directory except for your thehashcoin.conf, wallet.dat and the bootstrap.dat
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 09:54:47 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
Try deleting everything in your data directory except for your thehashcoin.conf, wallet.dat and the bootstrap.dat I did that still no go, it does index so it is loading from bootstrap but when it goes to process it stops at 67%. (should note this is a windows wallet) as well it renames the bootstrap.dat to bootstrap.dat.old
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 10:00:17 PM |
|
It indexes the blocks fine but when it goes to process them it stalls out at 67% @block 13277
Try deleting everything in your data directory except for your thehashcoin.conf, wallet.dat and the bootstrap.dat I did that still no go, it does index so it is loading from bootstrap but when it goes to process it stops at 67%. (should note this is a windows wallet) as well it renames the bootstrap.dat to bootstrap.dat.old Damn it.. I will try uploading the blk0000.dat to the github for you to download and place in the blocks directory. I guess I will have to make a live boot of Windows 7 to play around with because unfortunately every pc in my house is running a linux distro. If all else fails, would you be open to running a linux VM using VirtualBox and compiling a wallet within that? I know it's a pain in the ass, but I will stick with you through it.. I want to see you have a working wallet D:
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 10:02:33 PM |
|
I can try the blk0000.dat. not really proficient in linux
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 10:09:31 PM |
|
I can try the blk0000.dat. not really proficient in linux
Okay blk.dat has been added in the same folder where the bootstrap was located on the github. I would remove all traces of the bootstrap from the datadir for this first go after adding the blk.dat to the blocks folder. Make sure you delete the current data in the blocks folder. Also added rev.dat (honestly not sure if you need both) .. Also, if you wanted to give using a linux VM a shot, I could walk you through step by step setting up an Ubuntu 16.04 image and getting the wallet compiled with probably less than a dozen commands.
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 10:28:13 PM |
|
Still a no go. got a meeting tonight but can try some other things tomorrow. Thanks for your help.
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 10:29:58 PM |
|
Still a no go. got a meeting tonight but can try some other things tomorrow. Thanks for your help.
Damn it man, I'm sorry. We will figure it out. I am going to start playing with a wallet on windows to try to pinpoint the issue. Also, could you email me your debug.log to bhuff25930@gmail.com?
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 10:35:43 PM |
|
Also, it appears saltpool is back in sync!
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 18, 2018, 10:41:44 PM |
|
Still a no go. got a meeting tonight but can try some other things tomorrow. Thanks for your help.
Damn it man, I'm sorry. We will figure it out. I am going to start playing with a wallet on windows to try to pinpoint the issue. Also, could you email me your debug.log to bhuff25930@gmail.com? sent to your email, have a good night
|
|
|
|
apt-getschwifty (OP)
Newbie
Offline
Activity: 70
Merit: 0
|
|
August 18, 2018, 10:52:47 PM |
|
Still a no go. got a meeting tonight but can try some other things tomorrow. Thanks for your help.
Damn it man, I'm sorry. We will figure it out. I am going to start playing with a wallet on windows to try to pinpoint the issue. Also, could you email me your debug.log to bhuff25930@gmail.com? sent to your email, have a good night Hmmm.. It appears you must still have some portion of the chain that's invalid somewhere on your system when you're trying to import the chain because I see invalid block errors in the debug.log, and every node I have tried to sync has done so without error. Perhaps you have data for an orphaned block somewhere on your system. Let me know when you're free to play with it again and I will help you figure it out.
|
|
|
|
Mikelorr
Member
Offline
Activity: 254
Merit: 10
|
|
August 19, 2018, 10:23:17 AM Last edit: August 19, 2018, 10:56:21 AM by Mikelorr |
|
Ya it's weird, I deleted everything kept a copy of my wallet.dat and reinstalled the wallet still won't sync up. Here are some errors near the end of the debug log.
2018-08-19 10:46:19 ERROR: ConnectBlock: Consensus::CheckTxInputs: d05c41d5a490767edd3ec02378cb472766c0b412bbf61772ca3d8e5ce386d298, bad-txns-premature-spend-of-coinbase, tried to spend coinbase at depth 674 (code 16) 2018-08-19 10:46:19 InvalidChainFound: invalid block=c8a08b516d93315f292e6bed870b63ae039bd1be0f90586a58c5e711de2904d4 height=13428 log2_work=41.011562 date=2018-08-16 12:36:38 2018-08-19 10:46:19 InvalidChainFound: current best=4579a56fd6c74e122deb518877a2f83636feb3d3e91fdce51b1033b8eec87856 height=13427 log2_work=41.011437 date=2018-08-16 12:24:20 2018-08-19 10:46:19 ERROR: ConnectTip(): ConnectBlock c8a08b516d93315f292e6bed870b63ae039bd1be0f90586a58c5e711de2904d4 failed 2018-08-19 10:46:19 InvalidChainFound: invalid block=c8a08b516d93315f292e6bed870b63ae039bd1be0f90586a58c5e711de2904d4 height=13428 log2_work=41.011562 date=2018-08-16 12:36:38 2018-08-19 10:46:19 InvalidChainFound: current best=4579a56fd6c74e122deb518877a2f83636feb3d3e91fdce51b1033b8eec87856 height=13427 log2_work=41.011437 date=2018-08-16 12:24:20 2018-08-19 10:46:35 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:46:35 Misbehaving: 162.208.9.51:421 peer=1 (0 -> 100) BAN THRESHOLD EXCEEDED 2018-08-19 10:46:35 ERROR: invalid header received 2018-08-19 10:46:35 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:46:35 Misbehaving: 192.243.103.250:421 peer=0 (0 -> 100) BAN THRESHOLD EXCEEDED 2018-08-19 10:46:35 ERROR: invalid header received 2018-08-19 10:46:35 Warning: not punishing manually-connected peer 192.243.103.250:421! 2018-08-19 10:47:15 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:47:15 Misbehaving: 192.243.103.250:421 peer=0 (100 -> 200) 2018-08-19 10:47:15 ERROR: invalid header received 2018-08-19 10:47:35 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:47:35 Misbehaving: 192.243.103.250:421 peer=0 (200 -> 300) 2018-08-19 10:47:35 ERROR: invalid header received 2018-08-19 10:48:09 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:48:09 Misbehaving: 192.243.103.250:421 peer=0 (300 -> 400) 2018-08-19 10:48:09 ERROR: invalid header received 2018-08-19 10:48:43 Potential stale tip detected, will try using extra outbound peer (last tip update: 144 seconds ago) 2018-08-19 10:49:50 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:49:50 Misbehaving: 192.243.103.250:421 peer=0 (400 -> 500) 2018-08-19 10:49:50 ERROR: invalid header received 2018-08-19 10:50:00 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:50:00 Misbehaving: 192.243.103.250:421 peer=0 (500 -> 600) 2018-08-19 10:50:00 ERROR: invalid header received 2018-08-19 10:50:54 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:50:54 Misbehaving: 192.243.103.250:421 peer=0 (600 -> 700) 2018-08-19 10:50:54 ERROR: invalid header received 2018-08-19 10:50:55 ERROR: AcceptBlockHeader: prev block invalid 2018-08-19 10:50:55 Misbehaving: 192.243.103.250:421 peer=0 (700 -> 800) 2018-08-19 10:50:55 ERROR: invalid header received 2018-08-19 10:51:43 Potential stale tip detected, will try using extra outbound peer (last tip update: 324 seconds ago)
|
|
|
|
|