WildRig Multi 0.40.5 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[andrucrypt]

Although it is BTCC, v0.17.5 accepts shares,
 but v0.17.6 and later all shares are rejected.
 (Verified to v 0.17.8, on HiveOS)

It did not change even if it canceled OC.

CPU P4560 GPU RX570x9 RX580x2

pool ZergPool

Damn, I'm starting to hate Linux so much... %) For some reason _rotr64 intrinsic is not available in GCC, which I use for some precalc on CPU. Google says it should be __rorq, but looks like it's not... Will check later this problem.

[1713514323]

1713514323

[kokodesu]

Although it is BTCC, v0.17.5 accepts shares,
 but v0.17.6 and later all shares are rejected.
 (Verified to v 0.17.8, on HiveOS)

It did not change even if it canceled OC.

CPU P4560 GPU RX570x9 RX580x2

pool ZergPool

Damn, I'm starting to hate Linux so much... %) For some reason _rotr64 intrinsic is not available in GCC, which I use for some precalc on CPU. Google says it should be __rorq, but looks like it's not... Will check later this problem.

Thank you for developing linux and windows.
There is also a difference between the OS,
it will be difficult, but please do your best from now on.

Although it has nothing to do with BTCC,
 I am glad that sgminer's MTP algorithm is unstable,
and there are a lot of rejecteds, so it will be recovered with wildrigmulti.

[andrucrypt]

Although it is BTCC, v0.17.5 accepts shares,
 but v0.17.6 and later all shares are rejected.
 (Verified to v 0.17.8, on HiveOS)

It did not change even if it canceled OC.

CPU P4560 GPU RX570x9 RX580x2

pool ZergPool

Damn, I'm starting to hate Linux so much... %) For some reason _rotr64 intrinsic is not available in GCC, which I use for some precalc on CPU. Google says it should be __rorq, but looks like it's not... Will check later this problem.

Thank you for developing linux and windows.
There is also a difference between the OS,
it will be difficult, but please do your best from now on.

Although it has nothing to do with BTCC,
 I am glad that sgminer's MTP algorithm is unstable,
and there are a lot of rejecteds, so it will be recovered with wildrigmulti.

Try 0.17.9 version I have just released. What about MTP, maybe I will add it back someday, currently I have time to work only on small things.

[kokodesu]

Although it is BTCC, v0.17.5 accepts shares,
 but v0.17.6 and later all shares are rejected.
 (Verified to v 0.17.8, on HiveOS)

It did not change even if it canceled OC.

CPU P4560 GPU RX570x9 RX580x2

pool ZergPool

Damn, I'm starting to hate Linux so much... %) For some reason _rotr64 intrinsic is not available in GCC, which I use for some precalc on CPU. Google says it should be __rorq, but looks like it's not... Will check later this problem.

Thank you for developing linux and windows.
There is also a difference between the OS,
it will be difficult, but please do your best from now on.

Although it has nothing to do with BTCC,
 I am glad that sgminer's MTP algorithm is unstable,
and there are a lot of rejecteds, so it will be recovered with wildrigmulti.

Try 0.17.9 version I have just released. What about MTP, maybe I will add it back someday, currently I have time to work only on small things.

Thank you for the correction.
 I will confirm the update on HIVEOS as soon as possible.

I am sorry about MTP, but I understood. If there is an opportunity, please.
I will be busy in various ways,
 but I will support it from now on.

I am always grateful for your help.

[bitmangoes]

Very good version!
17.8 also better than before.
More stable, no rejects, no crashes!
X16 Fam. is perrfect!
Good Job! go on like that!.

My GPU 4x -Asus Radeon Strix Gaming OC 4GB - RX 570 - Bios Modded

[Seast]

@andrucrypt, have you benchmarked with R9 nano?

[bitmangoes]

Mining now with 0.17.9 Beta

4x RX 570 Asus Modded

X16r algo 41828 KH/s 41Mh/s Stable.!

Wow!. try if  can get higher
I have to say i get much better results on Windows 10 than on Linux.

Good when you at MTP back .! andrucrypt.

[dvz35]

what does this function give? --print-devices parameter

[andrucrypt]

what does this function give? --print-devices parameter

prints all devices that wildrig can initialize, using the same order as will be used while mining. This is for debug purpose and in case if you want to configure everything(specific intensities/etc.) before start the miner

@andrucrypt, have you benchmarked with R9 nano?

Nope, have no such devices. Anyway, they are too old, and too "hungry" as I know when algorithm needs compute power rather than memory bandwidth.

[kokodesu]

Although it is BTCC, v0.17.5 accepts shares,
 but v0.17.6 and later all shares are rejected.
 (Verified to v 0.17.8, on HiveOS)

It did not change even if it canceled OC.

CPU P4560 GPU RX570x9 RX580x2

pool ZergPool

Damn, I'm starting to hate Linux so much... %) For some reason _rotr64 intrinsic is not available in GCC, which I use for some precalc on CPU. Google says it should be __rorq, but looks like it's not... Will check later this problem.

Thank you for developing linux and windows.
There is also a difference between the OS,
it will be difficult, but please do your best from now on.

Although it has nothing to do with BTCC,
 I am glad that sgminer's MTP algorithm is unstable,
and there are a lot of rejecteds, so it will be recovered with wildrigmulti.

Try 0.17.9 version I have just released. What about MTP, maybe I will add it back someday, currently I have time to work only on small things.

Thank you for the correction.
 I will confirm the update on HIVEOS as soon as possible.

I am sorry about MTP, but I understood. If there is an opportunity, please.
I will be busy in various ways,
 but I will support it from now on.

I am always grateful for your help.

I confirmed in v0.17.9, but it was not good.
After all it has been rejected.
It is a report.

[andrucrypt]

I confirmed in v0.17.9, but it was not good.
After all it has been rejected.
It is a report.

Oh man, sorry but I'm confused with your English Can you please confirm - does it work or all shares are rejected?

[kokodesu]

I confirmed in v0.17.9, but it was not good.
After all it has been rejected.
It is a report.

Oh man, sorry but I'm confused with your English Can you please confirm - does it work or all shares are rejected?

I am sorry I do not speak English well.

v0.17.6~v0.17.9（HiveOS）
Although blake2b-btcc works, all shares are rejected.

[andrucrypt]

I am sorry I do not speak English well.

v0.17.6~v0.17.9（HiveOS）
Although blake2b-btcc works, all shares are rejected.

This is very strange. Last version done with simple C for precalc and if it works on Windows, it should on Linux... %)

[kokodesu]

I am sorry I do not speak English well.

v0.17.6~v0.17.9（HiveOS）
Although blake2b-btcc works, all shares are rejected.

This is very strange. Last version done with simple C and if it works on Windows, it should on Linux... %)

As there may be this bug, we will check both win and LINUX (HiveOS) operation.
The v0.17.5 version accepts shares but ...

Thank you very much.

[alexcrys1]

@andrucrypt

Hi i have a strange problems with algo wildkeccak.
I have 12 gpu- 10x580 8gb and 2x570 4gb  - amd drivers 19.2.2
I reinstall the drivers and without compute all gpu is working fine, when i swich all to compute is working only 8-gpu. the 4 gpu is N/A
Strange it is working for ex: 1,2,3,4,7,8,10,11, and must to run another bat. with missing gpu... when i restart the pc the order on gpu is change

[andrucrypt]

As there may be this bug, we will check both win and LINUX (HiveOS) operation.
The v0.17.5 version accepts shares but ...

Thank you very much.

I will try one more thing in next version, hope it will help.

@andrucrypt

Hi i have a strange problems with algo wildkeccak.
I have 12 gpu- 10x580 8gb and 2x570 4gb  - amd drivers 19.2.2
I reinstall the drivers and without compute all gpu is working fine, when i swich all to compute is working only 8-gpu. the 4 gpu is N/A
Strange it is working for ex: 1,2,3,4,7,8,10,11, and must to run another bat. with missing gpu... when i restart the pc the order on gpu is change

Well, the answer is - don't use compute Or try old version on wildrig(0.10.5). But this is definitely something related to drivers and I can't help here.

[webhead]

does this do verushash??

[andrucrypt]

does this do verushash??

It's already FPGA territory, so no sense. But you can use miner by monkins1010(if I remember right). If we talk about verushash 2.0, then it's already CPU territory and gpu miners are too slow, but you can try miner by same author.

[webhead]

yeah i tried there miner is rubbish hardly ever works thats why i was hopeing yours did, never mind lol.

[andrucrypt]

0.18.0 beta
- added glt-globalhash algorithm
- implemented --gpu-temp-limit and --gpu-temp-resume parameters
- now additionally to hashrate miner will show GPU temperature, fan speed and uptime
- added parameter --print-power(which will show power consumption per GPU Chip)
- added parameter --benchmark-timeout

Linux version will be later, probably tomorrow