BatMiner – is a multi-pool with dynamic power distribution between users and automatic referral system.

BatMiner can be used on computers, rigs, android mobile devices. Even the low-power devices are suitable. Our system recognizes the device power and sets the appropriate mining difficulty. At the same time, users can set any desirable difficulty by using appropriate port for connection.

New users will be automatically added to your network if you have registered an account and stay active for the last 3 days. The power of your device is also considered. You may also invite your friends to the network. Just send them your connection address and ask them to register on the web site. They in turn can connect another 10 devices. This way you have a small network consisting of 100 devices that can bring you from 20 $ to 1000 $ per month. The exact amount depends on devices power, cryptocurrency rates, mining network difficulty and other parameters.



Obtained profit calculation by example of small network consisting solely of mobile devices:

Suppose, you built 1 – 10 – 100 network with the average hash rate of 100 h/s for each node. In April 2018 such node’s power brings you about 0.00063 BTC or 5$ per month. So, for 10 nodes at the second level you get 10 * (20% * 5) $ = 10$ per month. For 100 nodes at the third level you get 100 * (20% * 5) $ = 100 $.  Suppose, your account has two private devices with the total hash rate 100 h/s. You receive 25% for them or 1.25 $ plus additionally 2% from the whole network. In total your income per month is 1,25 + 10 + 100 + (2% * 111,125) = 113,47 $. Note, all the work boils down to withdrawal of accumulated funds to your bitcoin or MXC wallet and checking application status on your device. Not bad? If needed, you can exchange the funds in Maxwell Wallet to fiat money.


According to statistics, each person has on average from 2 to 4 gadgets and the total number of mobile devices exceeds the earth’s population. Thus, we think that a network 1-10-100 is not big. Building such a network should be a relative simple task, if each BatMiner user could connect to his node devices from 10 people.

Now imagine how much you can earn if you build a hybrid network consisting of mobile devices, computers and rigs.




Official Website (Info, Roadmap)
https://batminer.network

Registration in BatMiner Network (Account Management)
https://my.batminer.network

BatMiner Pool based on Masari (In future other coins will be supported)
http://pool.batminer.network

Maxwell Coin (MXC) Wallet [WEBSITE]
https://wallet.mgc24.com

Trading Channel in Telegram
https://t.me/batminer_trading


INSTRUCTIONS HOW TO REGISTER AND MINE ON COMPUTERS AND RIGS


1. https://my.batminer.network/register  - Register Account and remember your login

2. If you don’t have a connection address, just press the link “get the address automatically”

3. Go to http://pool.batminer.network/#getting_started – our pool, section “Get started”

4. Choose your port from the list (1111 - 1119). For low and middle devices ports 1116 and 1118 is a good choice. For rigs please select 1119.
    As a rule, the more powerful the equipment, the higher the difficulty.

5. At the bottom in the section “Mining Applications” write your selected port and your user name – this is your login that was created during registration in BatMiner Network.
    At the end of the uses name add suffix “-pc” or “-pc1”. [Example LOGIN-pc1]. For your 2nd device add “-pc2”, etc. Press the button “Generate configuration”.

6. Copy config for your miner (button “see more”) and press the button “download”. On the redirected web site download and unpack the appropriate archive for your system.
    We recommend using xmrig and xmr-stack. If you are a novice miner, choose xmrig

     o     For xmrig open file “config.json” in a notepad and replace the “pools” section with the contents copied from 6. and start the miner
     o     For xmr-stack start the miner. All settings will be generated in the interactive mode.
            • Algorithm: cryptonight_masari
            • Pool address for port 1116: pool.batminer.network:1116
            • User name as above, e.g. sebastian-pc1
            • Password: x
            • Nicehash: yes
            • The rest: no or skip

7. In 10-15 minutes, your device shows up in your BatMiner Profile

you are done  


If you use BATMINER ports, see all statistics In BatMiner profile  https://my.batminer.network. You can monitor your equipment, expand your network or invite other users into your network.

For mining Masari exclusively, specify your MSR wallet in your user name and one of the bottom 5 ports in the miner settings (2222 - 9999). In this case you use our system as a common mining pool, all statistics will be shown for your wallet address.



Registration from Android devices

You can download it from Aptoide (NOT GOOGLE)
https://batminer-mobile-mining-farm.en.aptoide.com

OR

Download store Aptoide
https://aptoide.com

type “BATMINER” in aptoide and download it from there.
For mining press pick axe, then go to section “Profile” and register an account.



In several weeks you can exchange MXC into other alt coins such as Doge, Litecoin, ETH etc.



Have problems or questions write us or contact our IT Support:

e-mail: support@batminer.network

Telegram: https://t.me/batminer_support

Facebook: facebook.com/batminer

Twitter: https://twitter.com/BatMiner_

Vkontakte: https://vk.com/batminer_network

VIBER: +49-76512314

WHATSAPP: +49-76512314



Mining Software Upgrade (29.01.2019 - 02.02.2019)

Monero, Stelite, Masari and other cryptonight coins changed its POW. We are currently upgrading our mining software and adapt it to the forked coins.

It can take 3-4 days.

During this time, mining will not work on your devices. Please do not delete BatMiner App and do not change anything in rig configs.
They continue to work once we are finished. Be patient and stay tuned.

Upgrade Finished

We have finished upgrading our network including mining software. For computers, rigs and farms please download the latest version of xmrig(2.10 or newer) or xmrstack. Use the same settings as before and connect again.

Mobile devices should reconnect automatically. If it is not a case, please uninstall BatrMiner App and install it again from aptoide or from official BatMiner website.

Another question, can I store MXC in offline wallet or somewhere else?

Currently you can store it only in online Maxwell Wallet (wallet.mgc24.com). We will develop GUI version of this wallet later, take a look at our roadmap.

You specified wrong port, please use one of the ports 2222 - 9999. In this case you connect to our pool directly and may use your wallet as user name.

If you want to join BATMINER Network, then you should use BATMINER ports, i.e. 1112 - 1119. These ports begin with digit 1. If you connect to our pool via BATMINER you have to specify your login used during registration in BATMINER and suffix "-pc" as user name.

For registration in BATMINER Network use the following link:
https://my.batminer.network/register

We do not hold any ICO, why do you need this?
Currently we do not provide source code of our pool because of possible problems with plagiarism. In 2019 we will publish the source code of our Maxwell Blockchain.

Hi. If I mine Masari directly on your pool, do I get referrals and receive more income?

Please note, if you mine directly on our pool choose ports 2222 - 9999. 4 digits are equal.

If you want to join BatMiner Network, register at first an account using the link attached in the first post. Then in your miner settings xmrig, xmr-stack etc. set one of the following ports:

• 1111
• 1112
• 1116
• 1118
• 1119

An don't forget to type LOGIN-pc in your user name, so that our system could recognize your device and automatically add it to the network.

Ok, I switched to BatMiner Network and use my.batminer.network to check my statistics, but how can I add more devices?

Did you make a registration from your phone (android device)?
In this case, try to go to profile section and type your login user name and password.

If you forgot your password try to reset it on the following site:

https://my.batminer.network/account/reset

Type your login or email and follow the instructions. You will set a new password.
After that, login again using your new password.

You can make the same settings on your 2nd device and specify "LOGIN-pc2" as your user name.
Start minining and wait for 10-15 minutes, your device will show up shortly.